Finite sample properties of estimators of spatial autoregressive models with autoregressive disturbances

The article investigates the finite sample properties of estimators for spatial autoregressive models where the disturbance terms may follow a spatial autoregressive process. In particular we investigate the finite sample behavior of the feasible generalized spatial two-stage least squares (FGS2SLS) estimator introduced by Kelejian and Prucha (1998), the maximum likelihood (ML) estimator, as well as that of several other estimators. We find that the FGS2SLS estimator is virtually as efficient as the ML estimator. This is important because the ML estimator is computationally burdensome, and may even be forbidding in large samples, while the FGS2SLS estimator remains computationally feasible in large samples. Received: 20 January 2001 / Accepted: 31 August 2001     

Evaluation of improvement of physical and mechanical properties of bamboo fibers due to alkali treatment

Bamboo strips treated with caustic solutions of different concentrations, e.g., 5%, 10%, 15%, 20%, 25%, and 50%, were subjected to mechanical testing giving stresses on tensile strength, percent elongation at break, flexural strength, flexural modulus, and toughness. The change in average density was ?15%, and the weight loss value shows a maximum of 21.94% at 50% alkali treatment. The mechanical properties of bamboo strips increase steadily with increasing concentration of caustic soda, showing a comparable increased value at 15 and 20%, and then exhibiting a gradual fall. The percent elongation at break corroborates these observations showing a continuous decreasing trend. The properties under investigation exhibit a clear transition in between 15 and 20% alkali concentration. The morphology of strips was studied by scanning electron microscope and polarizing light microscope. The crystal structure of both untreated and treated strips was compared by XRD analysis. In both cases, the breakdown of the crystal structures of the cellulose fibers and the recrystallization or reorientation of the degraded chains that are devoid of hemicellulose are quite apparent. However, at a very high concentration (to the extent of 25%) the breakdown of structure predominates much more over the reorientation or recrystallization. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Comparing ANN and GMM in a voice conversion framework

In this paper, we present a comparative analysis of artificial neural networks (ANNs) and Gaussian mixture models (GMMs) for design of voice conversion system using line spectral frequencies (LSFs) as feature vectors. Both the ANN and GMM based models are explored to capture nonlinear mapping functions for modifying the vocal tract characteristics of a source speaker according to a desired target speaker. The LSFs are used to represent the vocal tract transfer function of a particular speaker. Mapping of the intonation patterns (pitch contour) is carried out using a codebook based model at segmental level. The energy profile of the signal is modified using a fixed scaling factor defined between the source and target speakers at the segmental level. Two different methods for residual modification such as residual copying and residual selection methods are used to generate the target residual signal. The performance of ANN and GMM based voice conversion (VC) system are conducted using subjective and objective measures. The results indicate that the proposed ANN-based model using LSFs feature set may be used as an alternative to state-of-the-art GMM-based models used to design a voice conversion system.     

Chitosan-based magnetic molecularly imprinted polymer: synthesis and application in selective recognition of tricyclazole from rice and water samples

A tricyclazole selective chitosan/Fe₃O₄ magnetic molecularly imprinted polymer (MMIP) was synthesized using non-covalent binding polymerization involving methacrylic acid (MAA) as functional monomer, divinylbenzene (DVB-80) as crosslinker, 2,2'-azobisisobutyronitrile as initiator, acetonitrile/toluene (75:25, v/v) as porogenic solvent and tricyclazole as template. Surface morphology and magnetic characterization of the prepared imprinted and non-imprinted polymers were done using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry and vibrating sample magnetometry, respectively. The adsorption kinetic data fitted best in pseudo-second-order model. The adsorption equilibrium was achieved in 30 min and the maximum binding capacity was 4579.9 µg/g. The Freundlich isotherm model was found suitable for explaining the binding isotherm data (R² > 0.99). Negative values of thermodynamic parameters ∆G (Gibb’s free energy), ∆H (enthalpy), and ∆S (entropy) revealed exothermic and spontaneous nature of adsorption processes. It also revealed decreased randomness at the solid–liquid interface during sorption. The scatchard plot analysis suggested heterogeneity of binding sites on MMIPs. The molecular recognition selectivity of MMIPs towards tricyclazole was much higher, as compared to its structural analogues, tebuconazole (α = 28.58) and hexaconazole (α = 37.16). The MMIPs were successfully applied to separate and enrich tricyclazole from fortified samples of rice and water, with a recovery percentage of 89.4% and 90.9%, respectively. These reusable imprinted polymers possessing high selectivity and specificity can be utilized as an adsorbent for solid-phase extraction in sample preparation for tricyclazole residue analysis in complex environmental matrices.

     

Acidolysis Reaction of Sal Fat (Shorea robusta) with Palmitic Acid

Acidolysis reaction of sal fat (Shorea robusta) with palmitic acid has been studied in relation to the operating variables like catalyst system and concentration, reaction temperature and time and molar ratios of reactants with the object of introducing more palmitic acid which is low in sal fat. The results demonstrate that as low as 2.5% and as high as 39% palmitic acid can be introduced in sal fat at the expense of other acids under the influence of various operating conditions. The products obtained differ from original sal fat in respect of chemical composition and slip point. The importance of such study is that there are possibilities of getting plastic fats of diverse properties for edible and industrial uses.     

Studies on engineering properties of PVC–PMMA semi‐interpenetrating polymer networks

Semi1 and semi2 interpenetrating polymer networks (IPNs) of PVC and in situ formed PMMA have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PMMA, respectively. These two types of IPNs have been compared w.r.t their physical, mechanical, and thermal properties and an endeavor has been made to find a correlation of these properties with the morphology generated in these systems. The semi1 IPNs displayed a decrease in their mechanical parameters and the physical properties as well, while in contrast, the semi2 IPNs exhibited a marginal increase in the corresponding values after an initial drop upto about 15% of crosslinked PMMA incorporation when compared to the crosslinked PVC in the case of semi1 IPN and linear PVC in the case of semi2 IPN. The various samples of semi1 and semi2 IPNs showed a two‐stage degradation typical of PVC, while confirming the increased stability with the samples having higher percentages of PMMA. The influence of crosslinking of the major matrix in semi1 IPN was almost counterbalanced by the influence of crosslinking in the dispersed PMMA phase in the case of semi2 IPN. The softening characteristics as detected by the extent of penetration of the probe, as has been detected by thermomechanical analysis, are in conformity with their mechanicals. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1725–1735, 2005     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

FracMAP: A user-interactive package for performing simulation and orientation-specific morphology analysis of fractal-like solid nano-agglomerates

Computer simulation techniques have found extensive use in establishing empirical relationships between three-dimensional (3d) and two-dimensional (2d) projected properties of particles produced by the process of growth through the agglomeration of smaller particles (monomers). In this paper, we describe a package, FracMAP, that has been written to simulate 3d quasi-fractal agglomerates and create their 2d pixelated projection images by restricting them to stable orientations as commonly encountered for quasi-fractal agglomerates collected on filter media for electron microscopy. Resulting 2d images are analyzed for their projected morphological properties.

Program summary

Program title: FracMAPCatalogue identifier: AEDD_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDD_v1_0.htmlProgram obtainable from: CPC Program Library, Queen's University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 4722No. of bytes in distributed program, including test data, etc.: 27 229Distribution format: tar.gzProgramming language: C++Computer: PCOperating system: Windows, LinuxRAM: 2.0 MegabytesClassification: 7.7Nature of problem: Solving for a suitable fractal agglomerate construction under constraints of typical morphological parameters.Solution method: Monte Carlo approximation.Restrictions: Problem complexity is not representative of run-time, since Monte Carlo iterations are of a constant complexity.Additional comments: The distribution file contains two versions of the FracMAP code, one for Windows and one for Linux.Running time: 1 hour for a fractal agglomerate of size 25 on a single processor.     

Dynamic Grover search: applications in recommendation systems and optimization problems

In the recent years, we have seen that Grover search algorithm (Proceedings, 28th annual ACM symposium on the theory of computing, pp. 212–219, 1996) by using quantum parallelism has revolutionized the field of solving huge class of NP problems in comparisons to classical systems. In this work, we explore the idea of extending Grover search algorithm to approximate algorithms. Here we try to analyze the applicability of Grover search to process an unstructured database with a dynamic selection function in contrast to the static selection function used in the original work (Grover in Proceedings, 28th annual ACM symposium on the theory of computing, pp. 212–219, 1996). We show that this alteration facilitates us to extend the application of Grover search to the field of randomized search algorithms. Further, we use the dynamic Grover search algorithm to define the goals for a recommendation system based on which we propose a recommendation algorithm which uses binomial similarity distribution space giving us a quadratic speedup over traditional classical unstructured recommendation systems. Finally, we see how dynamic Grover search can be used to tackle a wide range of optimization problems where we improve complexity over existing optimization algorithms.     

Impact of network effects and diffusion channels on home computer adoption

Researchers have identified network effects as one of the major drivers for the adoption and diffusion of household technologies. However, the mechanisms and social contexts through which network effects induce technology adoption are unclear. In this paper, we investigate the adoption of household computers using the dataset from the 1989-2003 Computer and Internet Supplement to the Current Population Surveys (CPS). We argue that social influence and learning play a dominant role in inducing the adoption of home computers, and workplaces and schools are important channels through which network effects take place. We find that recent adopters have a stronger impact than distant adopters on future computer adoptions. When the adoption rate is low, channels play a more important role, but their effects diminish as the adoption rate grows. We also find that diffusion channels are more effective for first-time adoption than for repeat purchases. Overall, our study provides important theoretical, policy, and managerial implications.