Effects of plasma treatment on biocompatibility of poly[(L‐lactide)‐co‐(ϵ‐caprolactone)] and poly[(L‐lactide)‐co‐glycolide] electrospun nanofibrous membranes

Poly[(l ‐lactide)‐co ‐(? ‐caprolactone)] (PLCL) and poly[(l ‐lactide)‐co ‐glycolide] (PLGA) copolymers are widely used in neural guide tissue regeneration. In this research, the surface modification of their hydrophilicity was achieved using plasma treatment. Attachment and proliferation of olfactory ensheathing cells on treated electrospun membranes increased by 26 and 32%, respectively, compared to the untreated PLCL and PLGA counterparts. Cells cultivated on both the PLCL and PLGA membranes showed high viability (>95%) and healthy morphologies with no evidence of cytotoxic effects. Cells grown on treated electrospun fibres displayed significant increases in mitochondrial activity and reductions in membrane leakage when compared to untreated samples. The results suggested that plasma treatment of the surface of the polymers enhanced both cell viability and growth without incurring any cytotoxic effects. © 2017 Society of Chemical Industry     

Application of low loading of collagen in electrospun poly[(l‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds to promote cellular biocompatibility

Electrospinning of various polymers has been used to produce nanofibrous scaffolds that mimic the extracellular matrix and support cell attachment for the potential repair and engineering of nerve tissue. In the study reported here, an electrospun copolymer of l ‐lactide and ε‐caprolactone (67:33 mol%) resulted in a nanofibrous scaffold with average fibre diameter and pore size of 476 ± 88 and 253 ± 17 nm, respectively. Blending with low loadings of collagen (<2.5% w/w) significantly reduced the average diameter and pore size. The uniformity of fibre diameter distributions was supported with increasing collagen loadings. The nanofibrous scaffolds significantly promoted the attachment and proliferation of olfactory ensheathing cells compared to cells exhibiting asynchronous growth. Furthermore, analysis of cell health through mitochondrial activity, membrane leakage, cell cycle progression and apoptotic indices showed that the nanofibrous membranes promoted cell vigour, reducing necrosis. The study suggests that the use of more cost‐effective, low loadings of collagen supports morphological changes in electrospun poly[(l ‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds, which also support attachment and proliferation of olfactory ensheathing cells while promoting cell health. The results here support further investigation of the electrospinning of these polymer blends as conduits for nerve repair. © 2013 Society of Chemical Industry     

Crosslinking assisted fabrication of ultrafine poly(vinyl alcohol)/functionalized graphene electrospun nanofibers for crystal violet adsorption

This article reports the fabrication of water‐stable electrospun mats made from water‐soluble poly(vinyl alcohol) and comprising ultrafine nanofibers for a high surface area to volume ratio as required for the adsorption of crystal violet. Acid‐catalyzed crosslinking is uniquely demonstrated as a facile strategy to improve water stability and, just as importantly, fine‐tune the nanofiber size of the electrospun mats. Amine‐functionalized graphene nanoplatelets are incorporated as an adsorption performance enhancer instead of the more widely reported graphene oxide. The functionalized graphene also facilitates fabrication of the composite electrospun mats by direct mixing of the water‐dispersible graphene with the aqueous polymer solution. The enhanced adsorption performance of the polymer nanocomposite mats is explained in detail at the molecular level, while the adsorption mechanism is supported by adsorption isotherm and related kinetic data. Moreover, the adsorbent mats can be removed from the water after use with the mat integrity still maintained. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46318.     

Electrospinning polymer blend of PLA and PBAT: Electrospinnability–solubility map and effect of polymer solution parameters toward application as antibiotic‐carrier mats

Electrospinning of a biodegradable polymer blend of poly(lactic acid) (PLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) is reported for the first time. Effects of several solution parameters on electrospinning are explored, including types of single and binary solvents, binary solvent mixing ratio, polymer blend concentration, polymer blending ratio, and loading content of tetrabutyl titanate as a compatibilizer. An electrospinnability–solubility map of the PLA/PBAT blend is firstly developed for the facile selection of a suitable binary solvent system, thus simplifying the laborious, time‐consuming, trial‐and‐error process. A particular binary solvent system derived from good and non‐solvent serves as the most suitable medium for the successful preparation of homogeneous bead‐free electrospun PLA/PBAT nanofibers. It is revealed that the compatibilizer acts not only as a diameter size tuner for the PLA/PBAT fibers but also as a mechanical property enhancer for the immiscible PLA/PBAT electrospun mats. Moreover, the antibacterial activity of the drug‐loaded PLA/PBAT fibrous mats suggests their potential application as antibiotic‐carrier mats. Preparation of the composite mats comprising bead‐free fibers with an average size at sub‐micrometer scale is also demonstrated, additionally promoting the possibility of using the PLA/PBAT‐based electrospun mats as a matrix of various additives for a wide range of applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46486.