Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

A new localization method in internet of things by improving beetle antenna search algorithm

Wireless Networks - Localization is regarded as one of the important challenges in the internet of things and Wireless Sensor Networks. The failure to localize sensors properly causes data loss and...     

Biosynthesised AgCl NPs using Bacillus sp. 1/11 and evaluation of their cytotoxic activity and antibacterial and antibiofilm effects on multi‐drug resistant bacteria

Silver nanoparticles (AgNPs) have attracted the attention of researchers due to their properties. Biological synthesis of AgNPs is eco‐friendly and cost‐effective preferred to physical and chemical methods, which utilize environmentally harmful agents and large amounts of energy. Microorganisms have been explored as potential biofactories to synthesize AgNPs. Bacterial NP synthesis is affected by Ag salt concentration, pH, temperature and bacterial species. In this study, Bacillus spp., isolated from soil, were screened for AgNP synthesis at pH 12 with 5 mM Ag nitrate (AgNO₃) final concentration at room temperature. The isolate with fastest color change and the best ultraviolet‐visible spectrum in width and height were chosen as premier one. AgNO₃ and citrate salts were compared in terms of their influence on NP synthesis. Spherical Ag chloride (AgCl) NPs with a size range of 35–40 nm were synthesized in 1.5 mM Ag citrate solution. Fourier transform infrared analysis demonstrated that protein and carbohydrates were capping agents for NPs. In this study, antimicrobial and antitumor properties of the AgNP were investigated. The resulting AgCl NPs had bacteriostatic activity against four standard spp. And multi‐drug resistant strain of Pseudomonas aeruginosa. These NPs are also cytotoxic to cancer cell lines MCF‐7, U87MG and T293.Inspec keywords: silver compounds, nanoparticles, nanomedicine, nanofabrication, particle size, biomedical materials, microorganisms, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, proteins, macromolecules, antibacterial activity, tumours, cancer, cellular biophysics, toxicologyOther keywords: citrate salts, spherical Ag chloride, particle size, Ag citrate solution, Fourier transform infrared analysis, protein, carbohydrates, capping agents, antitumour properties, bacteriostatic activity, Pseudomonas aeruginosa, multidrug resistant strain, cancer cell lines MCF‐7,U87MG, size 35 nm to 40 nm, temperature 293 K to 298 K, AgCl, ultraviolet‐visible spectrum, colour change, room temperature, Ag nitrate final concentration, soil, bacterial species, temperature effect, pH, Ag salt concentration, biofactories, microorganisms, environmentally harmful agents, chemical methods, physical methods, antibacterial properties, electrical properties, mechanical properties, silver nanoparticles, multidrug resistant bacteria, antibiofilm effects, antibacterial effects, cytotoxic activity, Bacillus sp. 1/11, biosynthesised AgCl NPs     

High throughput blood plasma separation using a passive PMMA microfluidic device

Since plasma is rich in many biomarkers used in clinical diagnostic experiments, microscale blood plasma separation is a primitive step in most of microfluidic analytical chips. In this paper, a passive microfluidic device for on-chip blood plasma separation based on Zweifach–Fung effect and plasma skimming was designed and fabricated by hot embossing of microchannels on a PMMA substrate and thermal bonding process. Human blood was diluted in various times and injected into the device. The main novelty of the proposed microfluidic device is the design of diffuser-shaped daughter channels. Our results demonstrated that this design exerted a considerable positive influence on the separation efficiency of the passive separator device, and the separation efficiency of 66.6 % was achieved. The optimum purity efficiency of 70 % was achieved for 1:100 dilution times.     

A simultaneous planning of production and scheduling operations in flexible flow shops: case study of tile industry

The aim of this paper is to study a simultaneous lot-sizing and scheduling in multi-product, multi-period flexible flow shop environments. A new mixed integer programming (MIP) model is proposed to formulate the problem. The objective function includes the total cost of production, inventory, and external supply. In this study, in case of not meeting the demand of customers, this demand should be met by foreign suppliers in higher price. Due to the high computational complexity of the studied problem, a rolling horizon heuristic (RHH) and particle swarm optimization algorithm (PSO) are implemented to solve the problem. These algorithms find a feasible and near-optimal from production planning and scheduling. Additionally, Taguchi method is conducted to calibrate the parameters of the PSO algorithm and select the optimal levels of the influential factors. The computational results show that the algorithms are capable of achieving results with good quality in a reasonable time and PSO has better objective values in comparison with RHH. Also, the real case study for tile industry with real features is applied. Sensitivity analysis is used to evaluate the performance of the model.     

Fabrication and characterization of highly efficient three component CuBTC/graphene oxide/PSF membrane for gas separation application

Metal organic frameworks (MOFs) with marvelous properties have aroused enormous attention for different application especially gas adsorption and separation. In this regard, fabrication of MOF hybrids with carbon based materials is new strategy to upgrade MOF performance. In this study CuBTC (Copper benzene-1,3,5-tricarboxylic acid)/graphene oxide (GO) composite was synthesized and characterized by BET, SEM, TGA, XRD and FT-IR techniques. Then CuBTC and CuBTC/GO composite were incorporated into polysulfone (PSF) polymer to construct mixed matrix membranes (MMMs). The obtained membranes were characterized by SEM, TGA, XRD and tensile tests and their gas permeability was measured. The results were compared to those of CuBTC/PSF MMMs. It was revealed that CuBTC/GO composite as filler showed superior performance relative to CuBTC. For instance, 15 wt% loading of CuBTC/GO in PSF represented outstanding gas separation behavior while the same loading of CuBTC in PSF deteriorated performance of MMM. Well particle dispersion and favorable polymer-filler interaction were responsible for such observed difference. A high H₂/CH₄ and H₂/N₂ selectivity of 80.03 and 70.46 were recorded for CuBTC/GO in PSF (15 wt%) compared to 44.56 and 40.92 for CuBTC in PSF (15 wt%).     

Outlier accommodation in moving-horizon state estimation: A risk-averse performance-specified approach

This paper presents a novel state estimation approach for linear dynamic systems when measurements are corrupted by outliers. Since outliers can degrade the performance of state estimation, outlier accommodation is critical. The standard approach combines outlier detection utilizing Neyman-Pearson (NP) type tests with a Kalman filter (KF). This approach ignores all residuals greater than a designer-specified threshold. When measurements with outliers are used (ie, missed detections), both the state estimate and the error covariance matrix become corrupted. This corrupted state and covariance estimate are then the basis for all subsequent outlier decisions. When valid measurements are rejected (ie, false alarms), potentially using the corrupted state estimate and error covariance, measurement information is lost. Either using invalid information or discarding too much valid information can result in divergence of the KF. An alternative approach is moving-horizon (MH) state estimation, which maintains all recent measurement data within a moving window with a time horizon of length L. In MH approaches, the number of measurements available for state estimation is affected by both the number of measurements per time step and the number of time steps L over which measurements are retained. Risk-averse performance-specified (RAPS) state estimation works within an optimization setting to choose a set of measurements that achieves a performance specification with minimum risk of outlier inclusion. This paper derives and formulates the MH-RAPS solution for outlier accommodation. The paper also presents implementation results. The MH-RAPS application uses Global Navigation Satellite Systems measurements to estimate the state of a moving platform using a position, velocity, and acceleration model. In this application, MH-RAPS performance is compared with MH-NP state estimation.     

Synthesis of Janus/non-Janus hollow graphene oxide micro- and nanoparticles and the effects of their localization on the thermal conductivity of blend-based polymer composites

Journal of Materials Science - In this study, the effects of Janus, hydrophilic and hydrophobic hollow graphene oxide (HO) particles on the thermal conductivity of binary polymer blends were...