Structural Characterization of Different Asphaltenes of Kuwaiti Origin

Asphaltenes obtained by precipitation from crude Kuwaiti oils have been analyzed by proton magnetic resonance (¹H-NMR), carbon-13 nuclear magnetic resonance (¹³C-NMR) and Infrared (IR) spectral techniques. The molecular weight and elemental analysis were also determined. These combined analytical data were used for the characterization of these Kuwaiti oils. The asphaltenes molecular weights range from approximately 4200-6500 with an H/C ratio of 0.91-1.1 with an average 45-71% aromatic carbons. The average side chain length was of 4-6 carbons. It can also be concluded that the asphaltenes under investigation contain 5-9 sets of condensed aromatic rings joined together by bridges of alkyl chains or other hetero atoms and the average number of each of these sets of condensed aromatic rings is nearly 7. There are a number of alicyclic rings and condensed alicyclic rings in asphaltene. The IR spectra showed main molecular groups including OH, NH, SH, C=O and aliphatic and aromatic C-H's.     

New correlation for predicting the viscosity of heavy petroleum fractions

A new, simple and reliable empirical correlation for predicting the viscosities of heavy petroleum fractions is proposed, applicable to fractions with mid-boiling points from 80 to 550°C over a wide range of viscosities (0.4 to 260 mm² s⁻¹) and measurement temperatures (40 to 200°C). This correlation showed better accuracy in the prediction of heavy petroleum fraction viscosities than that of the most accurate and much more complicated predictive methods in the literature, since it gave an overall average absolute deviation of 6.5% when tested on 296 data for medium and heavy petroleum fractions.     

Stress and strain state of concrete during freezing and thawing cycles

The objective of this work is to calculate the pressures, stresses, and strains induced into moist concrete during freezing and thawing. The applied theory is based on thermodynamics and the linear theory of elasticity. If no additional salts are dissolved in the pore water the inputs needed in the theory are relative humidity and temperature measured in the sample chamber and inside concrete and evaporable water amount in the pore structure. Theoretical results were compared with the test results made with two concretes cured under water or at 96% relative humidity. One of the concretes was air entrained and in the comparison concrete no air-entraining agents were used. In the test cylinders cured under water the largest tensional stresses in freezing occurred on the surface of the test cylinders both in the axial and tangential direction. The largest tensional stress was 2.2 MPa, both in air-entrained and in non air-entrained concretes. The largest tensional stresses in the warming phase took place at the end of the thawing period when the chamber temperature was around +5 °C. Then the maximum tension occurred in the middle of the concrete cylinder in the axial direction of the cylinder. This maximum tensional stress was over 2.5 MPa in the air-entrained concrete cured in the relative humidity of 96%. The thermodynamic pumping effect at the end of the thawing phase in every cycle can increase the pore water amount remarkably if free water or moisture is available on the surface of the structure or in the environment vapor. The thermodynamic pumping effect seems to be remarkably greater and more dangerous in air-entrained concretes.     

A recursive state estimator in the presence of state inequality constraints

This paper proposes an optimal recursive estimator to estimate the states of a stochastic discrete time linear dynamic system when the states of the system are constrained with inequality constraints. The case when the constraints are strictly satisfied is treated independently from the case when some of the constraints are violated. For the first case, the well known Kalman filter estimator is used. In the second case, an algorithm which uses a series of successive orthogonalizations on the measurement subspaces is employed to obtain the optimal estimate. It is shown that the proposed estimator has several attractive properties such that it is an unbiased estimator. More importantly, compared to other estimator found in the literature, the proposed estimator needs less computational efforts, is numerically more stable and it leads to a smaller variance. To show the effectiveness of the proposed estimator, several simulation results are presented and discussed.     

A portable toolkit for supporting end-user personalization and control in context-aware applications

A context-aware application in the pervasive computing environment provides intuitive user centric services using implicit context cues. Personalization and control are important issues for this class of application as they enable end-users to understand and configure the behavior of an application. However most development efforts for building context-aware applications focus on the sensor fusion and machine learning algorithms to generate and distribute context cues that drive the application with little emphasis on user-centric issues. We argue that, to elevate user experiences with context-aware applications, it is very important to address these personalization and control issues at the system interface level in parallel to context centric design. Towards this direction, we present Persona, a toolkit that provides support for extending context-aware applications with end-user personalization and control features. Specifically, Persona exposes a few application programming interfaces that abstract end-user customization and control mechanisms and enables developers to integrate these user-centric aspects with rest of the application seamlessly. There are two primary advantages of Persona. First, it can be used with various existing middlewares as a ready-to-use plug-in to build customizable and controllable context-aware applications. Second, existing context-aware applications can easily be augmented to provide end-user personalization and control support. In this paper, we discuss the design and implementation of Persona and demonstrate its usefulness through the development and augmentation of a range of common context-aware applications.     

Performance Evaluation of Inversion Mode and Junctionless Dual-Material Double-Surrounding Gate Si Nanotube MOSFET for 5-nm Gate Length

Semiconductors - In this work, drain current ID for 5-nm gate length with dual-material (DM) double-surrounding gate (DSG) inversion mode (IM) and junctionless (JL) silicon nanotube (SiNT) MOSFET...     

Structural Response of World Trade Center Buildings 1, 2 and 7 to Impact and Fire Damage

The National Institute of Standards and Technology (NIST) conducted an extensive investigation of the collapse of World Trade Center towers (WTC 1 and WTC 2) and the WTC 7 building. This paper describes the component, subsystem, and global analyses performed for the reconstruction of the structural response of WTC buildings 1, 2, and 7 to impact and fire damage. To illustrate the component and subsystem analyses, the approach taken for simulating the performance of concrete slabs and shear stud connectors in composite floors subject to fire conditions are presented, as well as steel floor framing connections for beams and girders. The development of the global models from the component and subsystem analyses is briefly described, including the sets of input data used to bound the probable conditions of impact and fire damage. The final analysis results that were used to develop the probable collapse hypotheses, and a comparison of the results against observed events, are presented for each building. A review of research activities focused on improving understanding of structural system response to multi-floor fires following the WTC disaster is also provided.     

Silicon Seed Priming Combined with Foliar Spray of Sulfur Regulates Photosynthetic and Antioxidant Systems to Confer Drought Tolerance in Maize (Zea mays L.)

Silicon - The present study evaluated the effect of silicon (Si) seed priming and sulfur (S) foliar spray on drought tolerance of two contrasting maize hybrids viz. drought tolerant Hi-Corn 11 and...