Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Health trajectories: long-term dynamics among black and white adults

Flow cytometry is a unique technology useful in the examination of effects of immunotoxic agents on target cells of the immune system. The purpose of this workshop was to provide an overview of the use of flow cytometry in new and established models of immunotoxicity, with emphasis on the potential applications, assay validation, and potential pitfalls. This overview begins with a discussion of methods useful in the assessment of Ca2+-dependent mechanisms of lymphoid cell activation in surface marker-defined human B cells, T cells, and monocytes. A discussion of the use of flow cytometry in analysis of apoptosis is also presented in this paper. The second paper presents data on the development and use of flow cytometry as an alternative to a Cr51 release assay for an assessment of cytotoxic T cell activation. The use of surface markers for characterizing and distinguishing the effects of chemical irritants from sensitizers is next presented, followed by an overview of the use of fluorescent probes to assess cell thiol status and overall oxidant-induced injury to lymphoid cells. Finally, an interlaboratory study designed to compare and evaluate the use of flow cytometry procedures in rat splenic cell subtyping is presented. Overall, these studies demonstrate the utility of flow cytometry assays in immunotoxicologic research, but further efforts are needed in the validation of many of these assays for routine use in immunotoxicologic testing.     

Improved GaAs-based quantum cascade laser (/spl lambda//spl sim/11 /spl mu/m) using high-reflectivity metal facet coating

By applying a high-reflectivity metal coating to the rear facet of a GaAs-based quantum cascade laser operating at /spl lambda//spl sim/11.5 /spl mu/m, the threshold current has been reduced by 11% at 260 K and pulsed operation of the epilayer-up mounted device was extended from 283 to 294 K.     

Experimental investigation of corium quenching at elevated pressure

This paper describes the results of experiments designed to quantify the cooling rate of corium by an overlying water pool. The experiments are intended to provide fundamental information on the ability of water to ingress into cracks and fissures that form in the debris during quench, thereby augmenting the otherwise conduction-limited heat transfer process. This information is being used to assess the effectiveness of a water pool in thermally stabilizing a molten-core/concrete interaction and cooling of ex-vessel core debris. The experiments involved corium inventories of 75 kg with a melt depth of 15 cm and diameter of 30 cm. The corium was composed of UO₂/ZrO₂/concrete to simulate mixtures of molten reactor core components and either siliceous or limestone/common sand (LCS) concrete. Initial melt temperatures were of the order of 2100 °C. The heat transfer rate from the corium was determined through measurements of the vapor production rate from the water pool. The melt was quenched at atmospheric pressure for the first two tests and at 4 bar for the two subsequent tests. Preliminary data analysis indicates that the overall heat transfer rate exceeded the conduction-limited rate for the three melts containing 8 wt.% concrete, but not for the fourth, which had 23 wt.% concrete. Also, the quench rate of the 8 wt.% concrete melts did not vary appreciably with pressure.     

Survey of dirofilariasis in Arkansas

A card survey was sent to 340 veterinarians in the Urban, Delta, Highland and Coastal Plain regions of Arkansas. Veterinarians were asked to indicate numbers of dogs tested, confirmed Dirofilaria immitis positive, diagnostic techniques, frequency and period tested. A significantly greater percentage of dogs tested D. immitis positive in the Delta region as compared with the Urban region. There were no significant differences in the percentage of treated dogs on prophylaxis or the types of diagnostic tests among regions.     

Morphological characterization of microporous carbon materials

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

New nonsteroidal androgen receptor modulators based on 4-(trifluoromethyl)-2(1H)-pyrrolidino[3,2-g] quinolinone

Typhoid fever is often associated with abnormal liver biochemical tests, but severe hepatic involvement with a clinical feature of acute hepatitis is a rare complication. There have been more than 150 cases of salmonella hepatitis reported from both developed and developing countries. The documented incidence varies widely from less than 1% to 26% patients with enteric fever. The possible associated factors for development of salmonella hepatitis are virulence of the organisms, delayed treatment and poor general health of the patients. The pathogenesis of severe hepatic involvement in salmonella infection may be multifactorial and includes endotoxin, local inflammatory and/or host immune reactions. Clinical jaundice in salmonella hepatitis usually occurs within the first 2 weeks of the febrile illness. Hepatomegaly and moderate elevation of transaminase levels are common findings. Extreme hepatic dysfunction with hepatic encephalopathy is a rare coexisting complication in salmonella hepatitis. A positive culture for salmonella from blood or stool is essential to differentiate salmonella hepatitis from other causes of acute hepatitis. Hepatic pathology is characterized by the presence of typhoid nodules with marked hyperplasia of reticuloendothelial cells. The prognosis is usually good as salmonella hepatitis responds well to a specific antibiotic therapy and juandice resolves with clinical improvement. The clinical course can be severe with a mortality rate as high as 20%, particularly with delayed treatment or in patients with other complications of salmonella infection. As enteric fever is a common infection, the recognition of salmonella hepatitis is of clinical importance.     

Types and associated type families for hardware simulation and synthesis

In this article we overview the design and implementation of the second generation of Kansas Lava. Driven by the needs and experiences of implementing telemetry decoders and other circuits, we have made a number of improvements to both the external API and the internal representations used. We have retained our dual shallow/deep representation of signals in general, but now have a number of externally visible abstractions for combinatorial and sequential circuits, and enabled signals. We introduce these abstractions, as well as our abstractions for reading and writing memory. Internally, we found the need to represent unknown values inside our circuits, so we made aggressive use of associated type families to lift our values to allow unknowns, in a principled and regular way. We discuss this design decision, how it unfortunately complicates the internals of Kansas Lava, and how we mitigate this complexity. Finally, when connecting Kansas Lava to the real world, the standardized idiom of using named input and output ports is provided by Kansas Lava using a new monad, called Fabric. We present the design of this Fabric monad, and illustrate its use in a small but complete example.     

Polyurethane‐infiltrated carbon foams: A coupling of thermal and mechanical properties

The thermal and mechanical properties of polyurethane‐infiltrated carbon foam of various densities were investigated. By combining the high thermal conductivity of the carbon foam with the mechanical toughness of the pure polyurethane, a mechanically tough composite (relative to the unfilled foam) that could be used at higher temperatures than the polyurethane's degradation was formed. Both the tensile strength and the modulus increased by an order of magnitude for the composites compared to unfilled foam, while the compressive and shear strengths and moduli of the composites approached values exhibited by pure polyurethane. At both 300 and 400°C, the rectangular blocks of pure polyurethane lost their mechanical integrity due to decomposition in air. Thermogravimetric analysis confirms substantial initial weight loss above 290°C. Filled carbon foam blocks, however, maintain their mechanical integrity at both 300 and 400°C indefinitely, although the bulk of the rectangular block mass is polyurethane. Three different carbon foam densities are examined. As expected, the higher density foams show greater heat transfer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2348–2355, 2003