Evaluation of Digitally Encoded Layer‐by‐layer Coated Microparticles as Cell Carriers

To obtain more biologically relevant data there is a growing interest in the use of living cells for assaying the biological activity of unknown chemical compounds. Density ‘multiplex’ cell‐based assays, where different cell types are mixed in one well and simultaneously investigated upon exposure to a certain compound are beginning to emerge. To be able to identify the cells they should be attached to microscopic carriers that are encoded. This paper investigates how digitally encoded microparticles can be loaded with cells while keeping the digital code in the microcarriers readable. It turns out that coating the surface of the encoded microcarriers with polyelectrolytes using the layer‐by‐layer (LbL) approach provides the microcarriers with a ‘highly functional’ surface. The polyelectrolyte layer allows the growth of the cells, allows the orientation of the cell loaded microcarriers in a magnetic field, and does not hamper the reading of the code. It has further been shown that the cells growing on the polyelectrolyte layer can become transduced by adenoviral particles hosted by the polyelectrolyte layer. It is concluded that the digitally encoded microparticles are promising materials for use in biomedical and pharmaceutical in‐vitro research where cells are used as tools.     

Modeling of the AC Arc Discharge on Snow-covered Insulators

A mathematical model for predicting the ac flashover voltage of snow-covered insulators is presented. The arc constant parameters in air gaps and inside snow, as well as the arc reignition condition are determined using a cylindrical model. The effects of the arc length on the arc constants parameters are also investigated. The model is then applied to an EPDM insulator artificially covered with natural snow. There is good concordance between the flashover results determined from the mathematical model and those obtained experimentally.     

High-speed techniques for estimating t1, t2, and density images

This work presents methods for estimating relaxation times T1 and T2 and proton density using a real time digital video processor. This device performs each mathematical step of the fitting algorithms in one video frame interval (1/30 s). Two-point fits of T1 and T2 may be generated in approximately 15 video frame intervals or about 0.5 s; generation of a T2 image from four acquired images requires about 30 video frame intervals or about 1 s. The hardware is common to many commercial MR scanners and requires no array processor. Such high-speed techniques can expedite the clinical use of computed images and facilitate the implementation of image synthesis.     

A Multi-Criteria Group Decision Making Methodology Using Interval Type-2 Fuzzy Sets: Application to Water Resources Management

In this paper, a new fuzzy group decision-making methodology which determines and incorporates negotiation powers of decision makers is developed. The proposed method is based on a combination of interval type-2 fuzzy sets and a multi-criteria decision making (MCDM) model, namely TOPSIS. To examine the applicability of the proposed methodology, it is used for finding the best scenario of allocating water and reclaimed wastewater to domestic, agricultural, and industrial water sectors and restoring groundwater quantity and quality in the Varamin region located in Tehran metropolitan area in Iran. The results show that the selected scenario leads to an acceptable groundwater conservation level during a long-term planning horizon. Although the capital cost of this scenario is high, which leads to groundwater restoration during the 34-year planning horizon, it is determined as the best allocation scenario. This scenario also entails the second least pumping cost, due to less water allocation from the groundwater. To evaluate the results of the proposed methodology, they are compared with those obtained using some well-known interval type-2 decision-making approaches including arithmetic-based, TOPSIS-based, and likelihood-based comparison methods. The Spearman correlation coefficient shows that the obtained results generally concur with those of the other methods. It is also concluded that the proposed methodology gives more reasonable results by calculating and considering the negotiation powers of decision makers in an extended TOPSIS-based group decision-making model.

     

Reactivity of perovskites on oxidative coupling of methane

Well-defined structures like ABO₃ (A = Ba, Sr, Ca; and B = Ti, Zr) perovskites were prepared by a sol-gel method which permits the formation of a crystalline structure at low-calcination temperatures (700 °C). The perovskite structures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) methods and the carbonate present at the surface was determined by Fourier transform infra-red spectroscopy. Reactivity studies showed that the perovskite structures are stable under oxidative coupling of methane (OCM) conditions. The yield increases followed the sequence Ca < Sr < Ba and Zr < Ti, and a stable BaTiO₃ gives a C₂ yield of 15% at 800 °C.     

CQARPL: Congestion and QoS-aware RPL for IoT applications under heavy traffic

The Journal of Supercomputing - The Internet of Things (IoT) provides a common platform to connect the heterogeneous devices over the internet. Hence, the number of devices connected via the...     

Définition théorique des paramètres en fort niveau d’un multipôle actif non linéaire

In this paper, large signal non linear P parameters are rigorously defined, allowing the characterization of non linear active n-port circuits in the frequency domain with the aim of computer aided design of power microwave devices. No a priori conditions bind the parameters to the variables describing the input signal. However the following rules apply to the parameters: they may be function of any input variables of the n-port circuit; the expression of the large-signal parameters should become identical to the expression of the linear parameters characterizing the n-port circuit under linear operating conditions when the values of the input variables tend to zero. An application of the definition to afet is demonstrated.     

An enhanced beam search algorithm for the Shortest Common Supersequence Problem

The Shortest Common Supersequence Problem asks to obtain a shortest string that is a supersequence of every member of a given set of strings. It has applications, among others, in data compression and oligonucleotide microarray production. The problem is NP-hard, and the existing exact solutions are impractical for large instances. In this paper, a new beam search algorithm is proposed for the problem, which employs a probabilistic heuristic and uses the dominance property to further prune the search space. The proposed algorithm is compared with three recent algorithms proposed for the problem on both random and biological sequences, outperforming them all by quickly providing solutions of higher average quality in all the experimental cases. The Java source and binary files of the proposed IBS_SCS algorithm and our implementation of the DR algorithm and all the random and real datasets used in this paper are freely available upon request.     

A novel amplitude-phase weighting for analog microwave beamforming

A simple receiver and transmitter structure for smart antennas and phased array antennas is proposed. A new technique for amplitude and phase weighting in microwave domain is presented. Signals of different antenna elements are sampled using pulses with adjusted time delay and duty cycles. The first replica of the sampled signal is reconstructed to provide the proper phase shift and amplitude weighting. A new switch circuit is designed to improve the power efficiency of the proposed structure and to lower the effects of switching on the impedance matching. The effect of nonideal switching on the performance of the system is analyzed. Procedures are proposed to integrate the proposed structure with adaptive signal processing tasks. Signal to noise ratio of the structure is studied under different scenarios.     

Dynamic modeling of DC arc discharge on ice surfaces

A dynamic model for predicting DC arc behavior and critical flashover voltage of ice-covered insulating surfaces is presented. The model takes into consideration insulating geometry, pre-contamination level, and characteristics of ice layers. Assuming arc behavior as a time dependant impedance, it is possible to determine various arc characteristics such as time histories of leakage currents, potential gradient, channel radius, trajectory, propagation velocity and the energy injected into the zones free of ice (also called air gaps). The simulated results provided by the model are in agreement with those obtained experimentally using a simplified ice-covered cylinder as well as a short string of five IEEE standard porcelain suspension units covered with artificial ice.