Electrical characteristics of the ITO/HgInTe photodiodes

Photodiodes designed to be sensitive in the region 0.5–1.7 μm and obtained by vacuum magnetron sputtering of the ITO (SnO₂ + In₂O₃) layer on the surface of the Hg₃In₂Te₆ single crystal are studied. The electrical characteristics, measured at 265–333 K, indicate that the mechanism of charge transport in the diodes under study is thermionic. The current-voltage characteristic and its temperature variations are described quantitatively based on the energy diagram and the found parameters of the heterojunction. Original Russian Text ? L.A. Kosyachenko, I.M. Rarenko, E.F. Sklyarchuk, I.I. German, Sun Weiguo, 2006, published in Fizika i Tekhnika Poluprovodnikov, 2006, Vol. 40, No. 5, pp. 568–571.     

Defect-free sintering of two material powder injection molded components Part II Model

A defect-free, two-material component can be obtained via co-sintering by suitably altering the powder characteristics or compositions, as demonstrated in Part I. In this paper, a model to ascertain the suitability of material systems to be co-sintered without defects such as delamination or interface pores is presented. The model is based on the management of the stress induced due to the difference in shrinkage and an analysis of the in situ strength of the weaker material during sintering. Tool steel in combination with stainless steel admixed with boron and Fe-2Ni admixed with boron are two systems used to validate the model. The predictions of the model are in good agreement with the observations.     

High-cycle fatigue monitoring in AgClxBr1-x fibres using absorption spectroscopy

The spectral transmittance of mixed silver-halide polycrystalline fibres was measured while they were undergoing repeated bending leading to mechanical fatigue. Microscopic mechanical defects were detected through their influence on the optical losses, without interfering with the deformation. Optical and mechanical lifetimes of the fibres were found to depend on the composition and to be larger for highly-mixed compositions. Scanning electron microscopy observations of fatigued fibres revealed a strong influence of the fibre composition on the fatigue damage. This dependence on the composition was explained using a theoretical model of solid-solution strengthening. This revised version was published online in November 2006 with corrections to the Cover Date.     

Master sintering curve concepts as applied to the sintering of molybdenum

Sintering experiments with various molybdenum powders are rationalized using a master sintering curve concept that collapses density, grain size, or other parameters onto a single curve. In this case, the integral work of sintering is developed and customized for different green densities. Construction of the master sintering curve is described to show how the curve can be normalized with respect to green density effects. Various grades of molybdenum for metal injection molding and die compaction are included in the analysis, processed over a range of heating cycles. Die-compacted samples of varying green densities are used to illustrate the efficacy of the new, normalized master sintering curve concept. Sintering cycle optimization is one possible outcome from this analysis.     

Latexes with intrinsic crosslink activity

In order to develop and study ‘two pack in one pot’ systems, i.e. binder systems consisting of a blend of complementary reactive latexes, epoxy- and amino-functional latexes were prepared and characterised, with atte lion especially directed to control of the number of functional groups and control of the molecular weight. The investigation is focused on the control of the molecular weight of epoxy-functional latexes and on the incorporation of amino groups in latexes by using amino-functional methacrylic monomers. To determine the reactivity of the epoxy and amino groups and to check which factors influence the crosslink reaction a number of blends were prepared from both solution and emulsion copolymers and dried at ambient temperatures. It was found that the major factors, which affect the efficiency of crosslinking, are the T_g and the molecular weight of the copolymers and, in the case of a ‘two pack in one pot system’, the rate of the polymer-polymer reaction in relation to that of the polymer-polymer interdiffusion.     

Progress in near-field photothermal infra-red microspectroscopy

Near‐field photothermal Fourier transform infra‐red microspectroscopy, which utilizes atomic force microscopy (AFM)‐type temperature sensors, is being developed with the aim of achieving a spatial resolution higher than the diffraction limit. Here we report on a new implementation of the technique. Sensitivity of the technique is assessed by recording infra‐red spectra from small quantities of analytes and thin films. A photothermomechanical approach, which utilizes conventional AFM probes as temperature sensors, is also discussed based on preliminary results. Early indication suggests that the photothermal approach is more sensitive than the thermomechanical one.     

Neuroleptic use and behavioral disturbance in nursing homes: a 1-year study

This article discusses a longitudinal study of change in disruptive behaviors among nursing home residents treated with neuroleptics compared with those not treated with neuroleptics. Observations were made of 201 participants on admission to and after 1 year in eight skilled nursing facilities. Nine disruptive behaviors were measured using the Psychogeriatric Dependency Rating Scale with nursing assistants. Neuroleptic use was documented from medication records. Odds ratios are reported for the association of behavior at baseline and use of neuroleptics on nine problem behaviors. For those who received neuroleptics during the year, there was greater change in both developing and resolving disruptive behaviors than for those not receiving neuroleptics. For both groups, restless or pacing behavior and belligerent behavior manifested by refusing instructions changed the most, both in developing and in apparently resolving. Our results show that change in disruptive behaviors occurs among nursing home residents regardless of neuroleptic use, but it occurs more frequently among those who receive neuroleptic medication. Knowledge of which disruptive behaviors are most likely to resolve or develop is important in training nursing home staff to cope with the behaviors as well as in planning interventions that may modify such behaviors.