Integrated Smart Sensor Calibration

In many applications electronic sensors are used toimprove performance and reliability of measurement systems. Suchsensors should provide a correct transfer from the physical signalto be measured to the electrical output signal. One importantstep to achieve this, is to calibrate each sensor by applyingdifferent reference input signals and adjusting the sensor transferaccordingly. Besides expensive reference equipment the calibrationprocess takes much time and attention per individual sensor,which means a considerable increase in sensor production costs.By including at the sensor or sensor interface chip a programmablecalibration facility the calibration of such smart sensors caneasily be automated and can be executed for a batch of sensorsat a time, thus minimizing the calibration time and costs. Thispaper presents a calibration method and options for integrationin the smart sensor concept, in hardware as well as in software.An advantage of the proposed method is that it does not needa large matrix of calibration data, which needs to be storedin a look-up table or converted into a correction formula, butinstead it uses a step-by-step approach to correct the sensortransfer at each calibration measurement until the error is sufficientlysmall.     

87Sr/86Sr from rock and soil into vine and wine

For provenance assignments of wines strontium isotope ratios can be used because soils from different wine-growing regions, and hence the wines grown there, each show specific ratios. Some successful applications are demonstrated.

---

⁸⁷Sr/⁸⁶Sr aus Gestein und Boden in Rebe und Wein

Zusammenfassung Zur Herkunftsbestimmung von Weinen können Strontium-Isotopenverhältnisse herangezogen werden, da die Böden verschiedener Weinbaugebiete, und damit die dort gezogenen Weine, jeweils spezifische Verhältnisse aufweisen. Einige erfolgreiche Anwendungen werden demonstriert.

     

193-nm lithography

The trend in microelectronics toward printing features 0.25 μm and below has motivated the development of lithography at the 193-nm wavelength of argon fluoride excimer lasers. This technology is in its early stages, but a picture is emerging of its strengths and limitations. The change in wavelength from 248 to 193 nm will require parallel progress in projection systems, optical materials, and photo-resist chemistries and processes. This paper reviews the current status of these various topics as they have been engineered under a multiyear program at MIT Lincoln Laboratory     

One hundred years of orthopedics in the Netherlands. I. Introduction

One hundred years ago, on 1 May 1898, the Netherlands Orthopaedic Association was founded. This was prompted by the view that general surgeons paid insufficient attention to the treatment of the locomotor system; they were permitted to join the new association, however, at any rate until 1947. It was especially in the last 30 years that orthopaedic surgery underwent major changes. The most striking novelty was arthroplastic surgery. There have also been developments in the treatment of spinal abnormalities, rheumatological surgery, sports medicine, oncology and traumatology.     

Interaction of protein percent with caloric density and protein source for lactating cows

Experiment 1 was to test effect of three ratios of energy to protein in complete mixed diets for 36 lactating cows in three, 28-d periods. Energy was varied with cottonseed hulls, pelleted ground corrugated boxes, and a mixture of the two. Crude protein was varied with soybean meal to give energy:crude protein of 5.7, 5.0, and 4.6 for each energy amount. Cottonseed meal was compared with soybean meal in corrugated box diets. Feed intake was much higher with cottonseed hulls, and appreciable feedlot bloat resulted from pelleted ground corrugated box diets. Data adjusted to equal feed intake showed significant effect of energy to crude protein ratio on milk yield and improved digestion of organic matter with soybean meal vs. cottonseed meal. Experiment 2 tested the hypothesis that lactating cows consuming high-protein alfalfa may benefit from supplemental protein. Diets were 50% forage. Six diets were 14 or 18% crude protein in three ratios of alfalfa hay to corn silage (0:100, 50:50, 100:0). Additional corn silage diets were to compare: 14 versus 18% protein from distiller's dried grains with solubles only and with .5 or .9% urea (four diets); two 14% protein diets compared .6% added potassium chloride with or without .5% urea. Thirty-six Holstein cows in early lactation received one of the 12 diets in each of three 28-d periods. Distiller's grains with solubles markedly depressed milk yield (2.2 kg/d) and milk protein (.22%); heat damage of distiller's grains was evident. Protein interacted with alfalfa so gain in milk from 18 versus 14% increased from .55 to 1.36 to 2.66 kg/d as alfalfa changed from 0 to 50 to 100%. Thus, crude protein of alfalfa was not as effective as that from soybean meal in supporting milk yield.     

Development of an empirical mathematical model for describing and optimizing the hygiene potential of a thermophilic anaerobic bioreactor treating faeces.

Poor sanitation and insufficient disposal of sewage and faeces are primarily responsible for water associated health problems in developing countries. Domestic sewage and faeces are prevalently discharged into surface waters which are used by the inhabitants as a source for drinking water. This paper presents a decentralized anaerobic process technique for handling of such domestic organic waste. Such an efficient and compact system for treating faeces and food waste may be of great benefit for developing countries. Besides a stable biogas production for energy generation, the reduction of bacterial pathogens is of particular importance. In our research we investigated the removal capacity of the reactor concerning pathogens, which has been operated under thermophilic conditions. Faecal coliforms and intestinal enterococci have been detected as indicator organisms for bacterial pathogens. By the multiple regression analysis technique an empirical mathematical model has been developed. The model shows a high correlation between removal efficiency and both, hydraulic retention time (HRT) and temperature. By this model an optimized HRT for defined bacterial pathogens effluent standards can be easily calculated. Thus, hygiene potential can be evaluated along with economic aspects. In this paper not only results for describing the hygiene potential of a thermophilic anaerobic bioreactor are presented, but also an exemplary method to draw the right conclusions out of biological tests with the aid of mathematical tools.     

Reactive pleuropericarditis following laparoscopic fundoplication

Samples of peripheral blood from 76 different donors were detected for the presence of human cytomegalovirus (HCMV) DNA by polymerase chain reaction (PCR). The results showed that HCMVs were present in 39 out of 76 blood donors which reached an infection positive rate of 51.3%. In addition, the sensitivity and specificity on PCR were tested, it also indicated that the sensitivity can reach the level of 5fg.microliter-1. The method is simple, rapid, highly sensitive and specificity. It can be considered as a diagnostic measure in clinical detection of HCMV.