Synthesis,characterization and magnetic properties of polythiophene/SrFe12-x(ZrZn)0.5xO19 nanocomposite as a microwave absorber

Ferrites are an important group of magnetic materials which are used as absorbers. The incorporation of ferrite and conducting polymer achieves great enhancement in microwave absorption properties. The nanocomposites of hexagonal ferrites embedded by conducting polymers such as polypyrrole, polyaniline and polythiophene (PTH) have been paid much attention. In the present study, strontium hexagonal ferrite doped by Zr and Zn with the final formula of SrFe_12-x(ZrZn)_0.5xO19 considering x = 0.9 and embedded by PTH was produced to achieve a nanocomposite with the highest microwave absorbing ability. In this study, after synthesis of SrFe₁₂O₁₉(ZrZn)_0.5xO19 and PTH, the nanocomposite was prepared by in situ polymerization. Wrapping the ferrite particles and PTH chains could form nanocomposite properly, and therefore acceptable interactions were observable between SrFe_12-x(ZrZn)_0.5xO19ferrite particles and PTH polymer chains in the composites. Assessing the X-ray diffraction (XRD) patterns of SrFe_12-x(ZrZn)_0.5xO19, PTH, and PTH/SrFe_12-x(ZrZn)_0.5xO19 nanocomposite indicated that the PTH characteristic peak shifts slightly and its peak intensity reduces, which may be attribute to the coating of PTH polymer chains onto SrFe_12-x(ZrZn)_0.5xO19 particles. We revealed also lower magnetic properties in the obtained nanocomposite. The morphological assessment also suggested that PTH could effectively coat the SrFe_12-x(ZrZn)_0.5xO19 particles. The synergistic effect of SrFe_12-x(ZrZn)_0.5xO19 particle plus PTH leads to microwave absorption percentage higher than 95% by PTH/SrFe_12-x(ZrZn)_0.5xO19 nanocomposite. Overall, nanocomposite creating by coupling interaction between SrFe_12-x(ZrZn)_0.5xO19 particles (x = 0.9) and PTH can effectively lead to achieve the highest rate of absorption of electromagnetic waves.     

Manganese Distribution between FeO‐MnO‐SiO2–CaO–MgO‐Al2O3 Slags and Molten Iron

Pretreatment of high manganese hot metal is suggested to produce hot metal suitable for further processing to steel in conventional LD converter and rich manganese slags satisfy the requirements for the production of silicomanganese alloys. Manganese distribution between slag and iron represents the efficiency of manganese oxidation from hot metal. The present study has been done to investigate the effect of temperature, slag basicity and composition of oxidizer mixture on the distribution coefficient of manganese between slag and iron. Ferrous oxide activity was determined in molten synthetic slag mixtures of FeO‐MnO‐SiO₂–CaO–MgO‐Al₂O₃. The investigated slags had chemical compositions similar to either oxidizer mixture or slags expected to result from the treatment of high manganese hot metal. The technique used to measure the ferrous oxide activity in the investigated slag systems was the well established one of gas‐slag‐metal equilibration in which molten slags contained in armco iron crucibles are exposed to a flowing gas mixture with a known oxygen potential until equilibrium has been attained. After equilibration, the final chemical analysis of the slags gave compositions having a particular ferrous oxide activity corresponding to the oxygen potential of the gas mixture. The determined values of ferrous oxide activity were used to calculate the equilibrium distribution of manganese between slag and iron. Higher manganese distribution between slag and iron was found to be obtained by using oxidizer containing high active iron oxide under acidic slag and relatively low temperature of about 1350°C.     

Human-Induced Neural and Mesenchymal Stem Cell Therapy Combined with a Curcumin Nanoconjugate as a Spinal Cord Injury Treatment

We currently lack effective treatments for the devastating loss of neural function associated with spinal cord injury (SCI). In this study, we evaluated a combination therapy comprising human neural stem cells derived from induced pluripotent stem cells (iPSC-NSC), human mesenchymal stem cells (MSC), and a pH-responsive polyacetal–curcumin nanoconjugate (PA-C) that allows the sustained release of curcumin. In vitro analysis demonstrated that PA-C treatment protected iPSC-NSC from oxidative damage in vitro, while MSC co-culture prevented lipopolysaccharide-induced activation of nuclear factor-κB (NF-κB) in iPSC-NSC. Then, we evaluated the combination of PA-C delivery into the intrathecal space in a rat model of contusive SCI with stem cell transplantation. While we failed to observe significant improvements in locomotor function (BBB scale) in treated animals, histological analysis revealed that PA-C-treated or PA-C and iPSC-NSC + MSC-treated animals displayed significantly smaller scars, while PA-C and iPSC-NSC + MSC treatment induced the preservation of β-III Tubulin-positive axons. iPSC-NSC + MSC transplantation fostered the preservation of motoneurons and myelinated tracts, while PA-C treatment polarized microglia into an anti-inflammatory phenotype. Overall, the combination of stem cell transplantation and PA-C treatment confers higher neuroprotective effects compared to individual treatments.     

Effect of Ag‐NPs synthesised by Chamaemelum nobile extract on the inflammation and oxidative stress induced by carrageenan in mice paw

An environmentally friendly and rapid procedure was developed to synthesise silver nanoparticles (Ag‐NPs) by Chamaemelum nobile extract and to evaluate its in vivo anti‐inflammatory and antioxidant activities. The ultraviolet–visible absorption spectrum of the synthesised Ag‐NPs showed an absorbance peak at 422. The average size of spherical nanoparticles was 24 nm as revealed by transmission electron microscopy. Fourier transform infra‐red spectroscopy analysis supported the presence of biological active compounds involved in the reduction of Ag ion and X‐ray diffraction confirmed the crystalline structure of the metallic Ag. The anti‐inflammatory and antioxidant activity of the Ag‐NPs was investigated against carrageenan‐induced paw oedema in mice. The levels of malondialdehyde (MDA) and antioxidant enzymes superoxide dismutase, catalase, glutathione peroxidase and inflammatory cytokines tumour necrosis factor (TNF‐α), interferon gamma and interleukin (IL)‐6, IL‐1β were assessed in this respect. The results demonstrated that anti‐inflammatory activity of the Ag‐NPs might be due to the ability of the nanoparticles to reduce IL‐1β, IL‐6 and TNF‐α. Moreover, reduction of antioxidant enzymes along with an increase in MDA level shows that the anti‐inflammatory activity of the synthesised Ag‐NPs by C. nobile is attributed to its ameliorating effect on the oxidative damage.Inspec keywords: silver, nanoparticles, nanofabrication, ultraviolet spectra, visible spectra, particle size, transmission electron microscopy, Fourier transform infrared spectra, X‐ray diffraction, crystal structure, enzymes, molecular biophysics, tumours, biomedical materials, nanomedicineOther keywords: Chamaemelum nobile extract, oxidative stress, mice paw, silver nanoparticles, antiinflammatory activity, antioxidant activity, ultraviolet‐visible absorption spectrum, spherical nanoparticle size, transmission electron microscopy, Fourier transform infrared spectroscopy, biological active compounds, X‐ray diffraction, crystalline structure, carrageenan‐induced paw oedema, malondialdehyde, antioxidant enzymes, superoxide dismutase, catalase, glutathione peroxidase, inflammatory cytokines, tumour necrosis factor, interferon gamma, interleukin, IL‐1β, IL‐6, TNF‐α, MDA level, Ag     

Enhancing the Nucleolytic Resistance and Bioactivity of Functional Nucleic Acids by Diverse Nanostructures through in Situ Polymerization-Induced Self-assembly

Functional nucleic acids (FNAs) are garnering tremendous interest owing to their high modularity and unique bioactivity. Three-dimensional FNAs have been developed to overcome the issues of nuclease degradation and limited cell uptake. We have developed a new facile approach to the synthesis of multiple three-dimensional FNA nanostructures by harnessing photo-polymerization-induced self-assembly. Sgc8 aptamer and CpG oligonucleotide were modified as macro chain-transfer reagents to mediate in situ polymerization and self-assembly. Diverse structures, including micelles, rods, and short worms, afford these two FNAs afford these two FNAs with higher nuclease resistance in serum serum, greater cellular uptake efficiency, and increased bioactivity.     

Deadlock-free scheduling in flexible manufacturing systems using Petri nets

This paper addresses the deadlock-free scheduling problem in Flexible Manufacturing Systems. An efficient deadlock-free scheduling algorithm was developed, using timed Petri nets, for a class of FMSs called Systems of Sequential Systems with Shared Resources (S 4 R). The algorithm generates a partial reachability graph to find the optimal or near-optimal deadlock-free schedule in terms of the firing sequence of the transitions of the Petri net model. The objective is to minimize the mean flow time (MFT). An efficient truncation technique, based on the siphon concept, has been developed and used to generate the minimum necessary portion of the reachability graph to be searched. It has been shown experimentally that the developed siphon truncation technique enhances the ability to develop deadlock-free schedules of systems with a high number of deadlocks, which cannot be achieved using standard Petri net scheduling approaches. It may be necessary, in some cases, to relax the optimality condition for large FMSs in order to make the search effort reasonable. Hence, a User Control Factor (UCF) was defined and used in the scheduling algorithm. The objective of using the UCF is to achieve an acceptable trade-off between the solution quality and the search effort. Its effect on the MFT and the CPU time has been investigated. Randomly generated examples are used for illustration and comparison. Although the effect of UCF did not affect the mean flow time, it was shown that increasing it reduces the search effort (CPU time) significantly.     

Controlled Creating of Cracks in Concrete for Non-destructive Testing

The non-destructive assessment of cracks in concrete is a common task for which non-destructive evaluation solutions have been published. Primarily, these tests have been carried out on artificial cracks that have been created by using notches instead of natural cracks. This study evaluates a procedure designed to create reproducible and controlled cracks in concrete. The procedure is based on using expanding mortar in a series of blind holes. This is done in combination with carefully aligned reinforcement to guide the direction of the crack development. The depth of the crack is also controlled by reinforcement. Crack depth varies statistically in the range of the maximum aggregate size (16 mm) used for concrete.     

Intelligent three-phase current balancing technique for single-phase load based on smart metering

This paper studies the problem of current balancing in a three-phase, low-voltage distribution network. We assume that the network has an automatic metering system that communicates using the power line carrier technique. Each meter reports the customer’s energy consumption and local current/voltage data to the central station at specified intervals. To maximize the efficiency of the grid, we wish to minimize the unbalanced current in the neutral phase. After framing this problem as a quadratic assignment problem, we use the “ant colony optimization” method to assign each customer to a phase. We confirm the effectiveness of the proposed method on an ensemble of simulated networks. Besides triggering point of high current relay is also decisive and should be consider in software commands output.     

Guest Editorial: Flexible-Joint and Flexible-Link Robots

Editorial Introduction

Guest Editorial: Flexible-Joint and Flexible-Link Robots