Effect of immunosuppression and splenectomy in transplantation sarcomas in mice

After spontaneous regression of transplanted tumours, marked reduction in number of tumours was found when challenged with isogenic tumour cells. The ALS abrogates this effect. Tumour removal by surgical excision of limb and subsequent time scheduled challenge by tumour cells maximally suppress on the 10th day and continues up to the 42nd day the tumorogenic effect. Splenectomy has no effect if done before a day or 3 days after challenge but marked decrease in tumour development was seen when challenged on the 8th day after splenectomy. Amputation and splenectomy together potentiates tumour formation. Only in tumour extrication, does resistance develop up to the 42nd day from surgery. Challenging at a different site in mice with tumours, resulted in prolongation of the intervals of tumour formation. Challenge after surgical removal of tumour after a time lapse, results in marked reduction in number and size of tumours. Surgical tumour extrication after splenectomy and subsequent challenge on 11th day inhibited tumour formation. Whereas splenectomized tumour bearing mice when challenged at a heterosite did not develop resistance.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Low-K Dielectric Pocket and Workfunction Engineering for DC and Analog/RF Performance Improvement in Dual Material Stack Gate Oxide Double Gate TFET

Silicon - In this paper, we investigate the effect of low K dielectric pocket on DC and analog/RF performance in dual material stack gate oxide double gate tunnel field effect transistor. For this,...     

Diffusion coefficient in polymer solutions

Molecular diffusivity of a solute in a solvent may be determined by measuring the extent of dispersion of solute in solvent flowing in a straight circular tube under the conditions of laminar flow. This simple and rapid method for determination of molecular diffusivity in aquous polymer solutions is discussed. Experimental results show a substantial reduction in the solute diffusivity with increase in polymer concentration.     

Epoxy‐montmorillonite clay nanocomposites: Synthesis and characterization

Nanocomposites of epoxy resin with montmorillonite clay were synthesized by swelling of different proportions of the clay in a diglycidyl ether of bisphenol‐A followed by in situ polymerization with aromatic diamine as a curing agent. The montmorillonite was modified with octadecylamine and made organophilic. The organoclay was found to be intercalated easily by incorporation of the epoxy precursor and the clay galleries were simultaneously expanded. However, Na‐montmorillonite clay could not be intercalated during the mixing or through the curing process. Curing temperature was found to provide a balance between the reaction rate of the epoxy precursor and the diffusion rate of the curing agent into the clay galleries. The cure kinetics were studied by differential scanning calorimetry. The exfoliation behavior of the organoclay system was investigated by X‐ray diffraction. Thermogravimetric analysis was used to determine the thermal stability, which was correlated with the ionic exchange between the organic species and the silicate layers. The morphology of the nanocomposites was evaluated by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2201–2210, 2004     

Flow regimes,hold–up and pressure drop for two phase flowin helical coils

Experimental results on flow pattern, hold–up and pressure drop are presented for cocurrent upward and downward air water flow in helical coils. A tube of 0.01 m internal diameter was used and the ratio of coil to tube diameter was varied from 11 to 156.5. Water flow rate was varied from 4.9 × 10-⁶ m³/s to 92 × 10-⁶ m³/s while the range of gas flow rate covered was 83 × 10-⁶ m³/s to 610 × 10-⁶ m³/s. A new mechanistic approach is proposed to correlate pressure drop data in coils. The proposed model retains the identity of each phase and separately accounts for the effects of curvature and tube inclination resulting from the torsion of the tube. This makes it possible to use a single model to predict pressure drop for both upward and downward two–phase flow in coiled tubes. Required correlations for hold–up, interfacial friction factor and friction factors for individual phases are provided.     

Numerical simulations of drop impact and spreading on horizontal and inclined surfaces

The phenomenon of drop spreading is important to several process engineering applications. In the present work, numerical simulations of the dynamics of drop impact and spreading on horizontal and inclined surfaces were carried out using the volume of fluid (VOF) method. For the horizontal surfaces, the dynamics of impact and spreading of glycerin drops on wax and glass surfaces was investigated for which the experimental measurements were available [Šikalo, Š., Tropea, C., Ganic, E.N., 2005a. Dynamic wetting angle of a spreading droplet. Experimental Thermal and Fluid Science 29, 795-802; Šikalo, Š., Tropea, C., Ganic, E.N., 2005b. Impact of droplets onto inclined surfaces. Journal of Colloid and Interface Science 286, 661-669]. The influence of surface wetting characteristics was investigated by using static contact angle (SCA) and dynamic contact angle (DCA) models. The dynamics of drop impact and spreading on inclined surfaces and the different regimes of drop impact and spreading process were also investigated. In particular, the effects of surface inclination, surface wetting characteristics, liquid properties and impact velocity on the dynamics of drop impact and spreading were investigated numerically and the results were verified experimentally. It was found that the SCA model can predict the drop impact and spreading behavior in quantitative agreement with the experiments for less wettable surfaces (SCA>90^°). However, for more wettable surfaces (SCA<90^°), the DCA observed at initial contact times were order of magnitude higher than SCA values and therefore the DCA model is needed for the accurate prediction of the spreading behavior.     

Gas-liquid mass transfer in three-phase fluidized beds with viscous pseudoplastic liquids

Liquid phase volumetric mass transfer coefficients for oxygen were determined in three-phase fluidized beds of 8 mm glass spheres fluidized by a cocurrent flow of air and pseudoplastic polysaccharide solutions (carboxymethyl cellulose, xanthan). A semi-theoretical relation for the effective shear rate was suggested. The mass transfer coefficients could be correlated, together with literature data for particle diameters of 3 mm and 5 mm in other liquids, using the terminal velocity as the particle-specific property.     

Modal analysis of human body vibration model for Indian subjects under sitting posture

Need and importance of modelling in human body vibration research studies are well established. The study of biodynamic responses of human beings can be classified into experimental and analytical methods. In the past few decades, plenty of mathematical models have been developed based on the diverse field measurements to describe the biodynamic responses of human beings. In this paper, a complete study on lumped parameter model derived from 50th percentile anthropometric data for a seated 54- kg Indian male subject without backrest support under free un-damped conditions has been carried out considering human body segments to be of ellipsoidal shape. Conventional lumped parameter modelling considers the human body as several rigid masses interconnected by springs and dampers. In this study, concept of mass of interconnecting springs has been incorporated and eigenvalues thus obtained are found to be closer to the values reported in the literature. Results obtained clearly establish decoupling of vertical and fore-and-aft oscillations.     

Multiresolution approach for multiple human detection using moments and local binary patterns

Human detection is a central problem in development of any surveillance application. In this study, we present a simple and efficient, multi-resolution gray scale invariant approach for multiple human detection. The multiresolution is important for objects of different size and gray scale invariance is important due to uneven illumination and within-class variability. The proposed method is based on integration of central moments upon multi-resolution gray scale invariant local binary patterns operator. Since, the local binary patterns operator is invariant against different resolutions of space scale and monotonic change in gray scale, therefore the proposed method is robust in terms of variations in space scale as well as gray scale. Another advantage is high computational accuracy of the method due to use of moment operator which enhances the efficiency of the proposed method. Moreover, the proposed method is simple, as these operations can be performed within a few steps in a small neighborhood and a lookup table. The proposed method is tested on multiple human images and experimentally found appropriate for multiple human detection. The proposed method has been evaluated over two datasets, one is our own created dataset and the other is standard INRIA human detection dataset. Experimental results obtained from the proposed method demonstrate that better discrimination can be achieved for human and non-human objects in real scenes.