The effect of epoxide content on compatibility of poly(lactic acid)/epoxidized natural rubber blends

The objective of this work was to determine the effect of the epoxide content in epoxidized natural rubber (ENR) on the miscibility and compatibility with poly(lactic acid) (PLA) in prepared PLA/ENR blends. PLA was blended with 10 wt% of ENRs (epoxidized at 10, 15, 20, and 25 mol%). The presented study showed that the in situ graft copolymer, PLA-g-ENR, was formed during melt blending in the blends containing 10 and 15 mol% ENR. This work is the initial study showing the presence of PLA-g-ENR in the blends by ¹H-NMR and ¹³C-NMR. PLA-g-ENR acted as a compatibilizer, producing a partially miscible blend, indicated by an inward shift of the α-transition temperatures of PLA and ENR in the blends. PLA-g-ENR also greatly reduced the particle size of ENR and increased the impact strength, tensile strength, and elongation at break of the blends. The epoxide content of ENR changed deformation mechanisms of the blends.     

Compatibilization of poly(lactic acid)/epoxidized natural rubber blend with maleic anhydride

The objective of this work was to determine the compatibilization effect of different concentrations of maleic anhydride (MA) in poly(lactic acid) blended with epoxidized natural rubber (PLA/ENR). ENR-grafted MA [ENR-g-MA] was synthesized using four concentrations of MA: 0.15, 0.30, 0.45, and 0.60 phr. Using an internal mixer, binary (PLA/ENR, PLA/ENR-g-MA) and ternary (PLA/ENR/ENR-g-MA) polymer blends were prepared with a constant rubber content of 10 wt %. ENR impaired the mechanical properties of PLA, perhaps due to the relatively large size of the rubber particles. The compatibilization effect of MA was evaluated from the results of impact strength testing. ENR-g-MA was a toughening agent for PLA when the concentration of MA was in the range of 0.30–0.60 phr. MA increased miscibility between PLA and ENR. This effect was indicated in the blends by reductions in rubber particle size, the glass transition temperature of PLA, and the α-transition temperatures of PLA and ENR. In the binary polymer blends, the MA concentration in ENR-g-MA that produced the optimal mechanical properties of PLA was 0.60 phr. In the ternary blends, mechanical properties of PLA did not improve at any concentration of MA in ENR-g-MA. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48297.     

Effects of precursor concentration on crystalline morphologies and particle sizes of electrospun WO3 nanofibers

Tungsten oxide (WO₃) nanofibers with different crystalline morphologies and various particle sizes were fabricated using an electrospinning technique. The nanofibers were prepared from mixtures of polyvinyl alcohol (PVA) and ammonium metatungstate hydrate (AMH) of various concentrations ranging from 4.2%w/v to 50.0%w/v. After calcination at 500 °C for 2 h, the nanofibers were observed to have a monoclinic crystal structure with diameters ranging from 30 to 250 nm. AMH concentration had a large influence on the resulting nanofiber morphology. Very low AMH concentration of 4.2%w/v led to the formation of WO₃ nanofibers having a very large area of monocrystalline structure. Higher AMH concentrations result in polycrystalline WO₃ nanofibers with joined nanoparticles along the fiber axis. The average particle size within the nanofibers increased from 29 to 66 nm as the AMH concentration increased from 8.3%w/v to 50%w/v. At these precursor concentration levels, primary particles were formed before PVA was completely burnt off, resulting in agglomeration of primary particles along the nanofiber axis.