Enzymatic transesterification for production of biodiesel using yeast lipases: An overview

Biodiesel has provided an eco-friendly solution to fuel crisis, as it is renewable, biodegradable and a non-toxic fuel that can be easily produced through enzymatic transesterification of vegetable oils and animal fats. Enzymatic production of biodiesel has many advantages over the conventional methods as high yields can be obtained at low reaction temperatures with easy recovery of glycerol. Microbial lipases are powerful biocatalysts for industrial applications including biodiesel production at lower costs due to its potential in hydrolyzing waste industrial materials. Among them, lipases from yeasts, Candida antarctica, Candida rugosa, Cryptococcus sp., Trichosporon asahii and Yarrowia lipolytica are known to catalyze such reactions. Moreover, stepwise addition of methanol in a three step, two step and single step reactions have been developed using yeast lipases to minimize the inhibitory effects of methanol. The latest trend in biodiesel production is the use of whole-cell as biocatalysts, since the process requires no downstream processing of the enzyme. Synthesis of value added products from the byproduct glycerol further reduces the production cost of biodiesel. This review aims at compiling the information on various yeast lipase catalyzed transesterification reactions for greener production of biodiesel.     

Crystallization and melting behavior of HDPE in HDPE/teak wood flour composites and their correlation with mechanical properties

The nonisothermal crystallization behavior and melting characteristics of high‐density polyethylene (HDPE) in HDPE/teak wood flour (TWF) composites have been studied by differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD) methods. Composite formulations of HDPE/TWF were prepared by varying the volume fraction (?_f) of TWF (filler) from 0 to 0.32. Various crystallization parameters evaluated from the DSC exotherms were used to study the nonisothermal crystallization behavior. The melting temperature (T_m) and crystallization temperature (T_p) of the composites were slightly higher than those of the neat HDPE. The enthalpy of melting and crystallization (%) decrease with increase in the filler content. Because the nonpolar polymer HDPE and polar TWF are incompatible, to enhance the phase interaction maleic anhydride grafted HDPE (HDPE‐g‐MAH) was used as a coupling agent. A shift in the crystallization and melting peak temperatures toward the higher temperature side and broadening of the crystallization peak (increased crystallite size distribution) were observed whereas crystallinity of HDPE declines with increase in ?_f in both DSC and WAXD. Linear correlations were obtained between crystallization parameters and tensile and impact strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Eggs of a female Japanese quail are more likely to be fertilized by a male that she prefers.

Male Japanese quail (Coturnix japonica) that conspecific females preferred in a 10-min, forced-choice test of affiliative preference were more likely than were males not preferred in such a test to fertilize females' eggs when subsequently mated with them, although preferred and nonpreferred males mated equally often with females. Further, the probability that a nonpreferred male would fertilize a female's eggs was significantly increased if she watched while he courted and mated with another female. The results indicate that in Japanese quail (a) affiliative preference reliably predicts females' choices of fathers for their offspring and (b) females may have some degree of control over whether the males with whom they mate actually fertilize their eggs. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mechanical properties of teak wood flour‐reinforced HDPE composites

Mechanical properties such as tensile and impact strength behavior of teak wood flour (TWF)‐filled high‐density polyethylene (HDPE) composites were evaluated at 0–0.32 volume fraction (Φ_f) of TWF. Tensile modulus and strength initially increased up to Φ_f = 0.09, whereas a decrease is observed with further increase in the Φ_f. Elongation‐at‐break and Izod impact strength decreased significantly with increase in the Φ_f. The crystallinity of HDPE also decreased with increase in the TWF concentration. The initial increase in the tensile modulus and strength was attributed to the mechanical restraint, whereas decrease in the tensile properties at Φ_f > 0.09 was due to the predominant effect of decrease in the crystallinity of HDPE. The mechanical restraint decreased the elongation and Izod impact strength. In the presence of coupling agent, maleic anhydride‐grafted HDPE (HDPE‐g‐MAH), the tensile modulus and strength enhanced significantly because of enhanced interphase adhesion. However, the elongation and Izod impact strength decreased because of enhanced mechanical restraint on account of increased phase interactions. Scanning electron microscopy showed a degree of better dispersion of TWF particles because of enhanced phase adhesion in the presence of HDPE‐g‐MAH. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Glass microparticle- versus microsphere-filled experimental dental adhesives

This study aimed to formulate antibacterial dental adhesives. Phosphate-substituted methacrylate adhesives were modified with 0–20 wt % copper-doped glass microparticles. Two shapes of microparticles were used: regular shaped (microspheres) and irregular shaped (microparticles). The morphology/composition, roughness, monomer conversion (DC%), thermogravimetric analysis, and antibacterial action against S. mutans and P. aeruginosa and ion release were investigated. The results showed that microspheres produced adhesives with a relatively smoother surface than microparticles did. The DC% of adhesives increased with increasing glass filler content. Filled adhesives showed polymer decomposition at ~315 °C and glass melting at 600–1000 °C. The weight loss percent of adhesives decreased with increasing weight percent of fillers. Glass microparticles at 0–20 wt % significantly increased the antibacterial action of adhesives against both bacteria. Glass microspheres at 0–5 wt % significantly increased the antibacterial action of adhesives against both bacteria. Only 20 wt % microparticle-filled adhesive showed an inhibition zone similar to tobramycin (positive control). Microparticle-filled adhesives (with >5 wt % filler) significantly reduced S. mutans more than their microsphere counterparts. Microsphere-filled adhesives (with ≤5 wt % filler) significantly reduced P. aeruginosa more than their microparticle counterparts. Microsphere-filled adhesives showed higher Cu release than their microparticle counterparts. Accordingly, phosphate-substituted methacrylate filled with glass could be used as an antibacterial adhesive. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47832.     

Dynamic mechanical properties of high density polyethylene and teak wood flour composites

The dynamic mechanical properties of high density polyethylene (HDPE) and teak wood flour (TWF) composites at varying volume fraction (Φ _f) of TWF from 0.00 to 0.32 have been studied. In HDPE/TWF composites, storage modulus (E′) decreased at Φ _f = 0.05, then increases with Φ _f; however, values were lower than HDPE up to Φ _f = 0.16, due to a pseudolubricating effect of filler. Loss modulus (E″) values were higher than HDPE in β and α relaxation regions while in γ relaxation region values were marginally equal to HDPE. Tan δ value decreases with Φ _f which may be due to enhanced amorphization and decreased crystallinity of HDPE. In presence of maleic anhydride grafted HDPE (HDPE-g-MAH), E′ values were lower than HDPE/TWF composites. In HDPE/TWF/HDPE-g-MAH, E″ were slightly higher than HDPE/TWF due to slippage of HDPE chains facilitated by the extent of degradation of coupling agent. Tan δ were higher for both systems than the rule of mixture.     

E3 Ubiquitin Ligase APC/CCdh1 Regulation of Phenylalanine Hydroxylase Stability and Function

Phenylketonuria (PKU) is an autosomal recessive metabolic disorder caused by the dysfunction of the enzyme phenylalanine hydroxylase (PAH). Alterations in the level of PAH leads to the toxic accumulation of phenylalanine in the blood and brain. Protein degradation mediated by ubiquitination is a principal cellular process for maintaining protein homeostasis. Therefore, it is important to identify the E3 ligases responsible for PAH turnover and proteostasis. Here, we report that anaphase-promoting complex/cyclosome-Cdh1 (APC/C)^Cdh1 is an E3 ubiquitin ligase complex that interacts and promotes the polyubiquitination of PAH through the 26S proteasomal pathway. Cdh1 destabilizes and declines the half-life of PAH. In contrast, the CRISPR/Cas9-mediated knockout of Cdh1 stabilizes PAH expression and enhances phenylalanine metabolism. Additionally, our current study demonstrates the clinical relevance of PAH and Cdh1 correlation in hepatocellular carcinoma (HCC). Overall, we show that PAH is a prognostic marker for HCC and Cdh1 could be a potential therapeutic target to regulate PAH-mediated physiological and metabolic disorders.     

Mechanical properties of HDPE/bark flour composites

Tensile and impact properties of Neem bark flour (BF) containing high density polyethylene (HDPE) composites were studied at 0–0.26 volume fraction of filler. Tensile modulus and strength and breaking elongation decreased with increase in BF concentration. The decrease in tensile modulus and strength was attributed to the decrease in crystallinity of the polymer compared to the imposed mechanical restraint by the BF. Analysis of tensile strength data indicated formation of stress concentration in the interphase. Because of this stress concentration and the mechanical restraint, the elongation‐at‐break and Izod impact strength decreased. Use of a coupling agent, HDPE‐g‐MAH, brings about enhanced phase adhesion, increasing the tensile modulus and strength. Enhanced adhesion marginally lowers composite ductility at higher filler contents and aids stress transfer increasing the Izod impact strength inappreciably. Scanning electron microscopic studies indicated better dispersion of BF particles and enhanced interphase adhesion in presence of the coupling agent. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

E3 Ubiquitin Ligase APC/CCdh1 Negatively Regulates FAH Protein Stability by Promoting Its Polyubiquitination

Fumarylacetoacetate hydrolase (FAH) is the last enzyme in the degradation pathway of the amino acids tyrosine and phenylalanine in mammals that catalyzes the hydrolysis of 4-fumarylacetoacetate into acetoacetate and fumarate. Mutations of the FAH gene are associated with hereditary tyrosinemia type I (HT1), resulting in reduced protein stability, misfolding, accelerated degradation and deficiency in functional proteins. Identifying E3 ligases, which are necessary for FAH protein stability and degradation, is essential. In this study, we demonstrated that the FAH protein level is elevated in liver cancer tissues compared to that in normal tissues. Further, we showed that the FAH protein undergoes 26S proteasomal degradation and its protein turnover is regulated by the anaphase-promoting complex/cyclosome-Cdh1 (APC/C)^Cdh1 E3 ubiquitin ligase complex. APC/C^Cdh1 acts as a negative stabilizer of FAH protein by promoting FAH polyubiquitination and decreases the half-life of FAH protein. Thus, we envision that Cdh1 might be a key factor in the maintenance of FAH protein level to regulate FAH-mediated physiological functions.