Optimization of Pathogen Capture in Flowing Fluids with Magnetic Nanoparticles

Magnetic nanoparticles have been employed to capture pathogens for many biological applications; however, optimal particle sizes have been determined empirically in specific capturing protocols. Here, a theoretical model that simulates capture of bacteria is described and used to calculate bacterial collision frequencies and magnetophoretic properties for a range of particle sizes. The model predicts that particles with a diameter of 460 nm should produce optimal separation of bacteria in buffer flowing at 1 L h⁻¹. Validating the predictive power of the model, Staphylococcus aureus is separated from buffer and blood flowing through magnetic capture devices using six different sizes of magnetic particles. Experimental magnetic separation in buffer conditions confirms that particles with a diameter closest to the predicted optimal particle size provide the most effective capture. Modeling the capturing process in plasma and blood by introducing empirical constants (c_e), which integrate the interfering effects of biological components on the binding kinetics of magnetic beads to bacteria, smaller beads with 50 nm diameters are predicted that exhibit maximum magnetic separation of bacteria from blood and experimentally validated this trend. The predictive power of the model suggests its utility for the future design of magnetic separation for diagnostic and therapeutic applications.     

Potency comparison of peptidomimetic inhibitors against HIV-1 and HIV-2 proteinases: design of equipotent lead compounds

The results of investigation of haptoglobin (Hp) types in 596 donor blood samples in some towns of Ukraine (Dnepropetrovsk, Kharkov, Odessa, Kiev, Uzhgorod, Zhitomir) are presented. Three normal Hp types (Hp1-1, Hp2-1 and Hp2-2) have been found. The reliable interpopulation differences in the Hp types frequency were not found. On the whole the Hp types frequency in the type Hp1-1 comprised 12.7%. In the type Hp2-1-48.1% and in the type Hp2-2-36.5%. The frequency of the gene Hp1 is 0.38. The frequency of the Hp types and of the gene Hpl in Ukraine is similar to that in population of Eastern Europe and European Part of Russia.     

Initial results of an in vitro fertilization and embryo transfer program in a private health institution

Between October 1994 and the end of February 1995 115 patients were included in our programme. In these patients we monitored 141 cycles, performed 128 punctures and 100 ET. In 14 instances (9.2%) the cycle was abolished. By puncture of 1468 follicles 1370 oocytes were obtained which corresponded to a recovery rate of 93.3%. On average by aspiration 11.9 oocytes per patient were obtained. From the total number of acquired oocytes 54.6% were fertilized and 43.5% divided. Of 596 embryos 290 were transferred and the remainder was vitrified. A total of 17 clinical pregnancies were achieved, incl. 5 which terminated by abortion, the remainder proceeds. The authors are aware that they present a relatively small group during a short period of time, and thus the first results of the centre cannot be presented as a current standard. Despite this the results permit some optimism for the future and indicate a certain amount of standardization of the authors' clinical and laboratory work.     

Kinetic Monte-Carlo simulation of network formation

Summary the simulation described in Part I was applied to random step polyaddition of a trifunctional monomer and the results were compared with exact solution for an infinite system. The gel point conversions, the weight-average degree of polymerization before (P _w) and beyond (P _w,sol) the gel point, the sol fraction and the cycle rank were used for comparison. The best way for detection of the gel point conversion is the extrapolation of the gel fraction, w _g, to w _g=0. The largest fluctuations are exhibited by P _w and P _w,sol. To get results closer to the exact ones, one can repeat several experiments with smaller number of units or increase the number of units, the former way being somewhat more economical. Typical orders of magnitude used were 10⁷ monomeric units.     

Depression in college students: Personality and experiential factors.

In this study we examined the nature of college-student depression and its relation to personality variables and to experiences unique to college life. Thirty-five depressed and 39 nondepressed students completed a depression inventory, a series of personality scales, and a survey developed to investigate the impact of potentially distressing components of college life. Results revealed that college-student depression, though mild in intensity, represents a serious problem: Three quarters of depressed students had been depressed for more than 3 months, and half had contemplated suicide. Both personality characteristics and experiential variables were found to be significantly related to depression, together accounting for approximately half the variance. We examined individual personality traits and experiential variables that were found to differ between depressed and nondepressed subjects, and we discuss the implications of the findings for counseling and for future research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Low strain rate plasticity of continuously cast carbon steels

By a special plastometric method, the straightening operation of a vertically cast strand of two carbon steels was simulated. The temperature dependence of the low strain rate plasticity of both the steels examined is analogous although caused by very different reasons. As to the plain carbon steel, the amount of ferrite and its location is of prime importance, whereas in the case of eutectoid steel various modes of fracture and the influence of temperature on the relative plasticity of type II MnS inclusions are influencial. To avoid transverse cracking, it seems to be suitable to keep the strand at a rather high temperature (above 900 °C). Temperature cycling seems to be fundamental as to the structural changes taking place in the strand (grain size refining, ferrite fraction if any), whereas analogous influences of straining are more or less inexpressive. Of course, the results obtained are of quality only since the practical and laboratory conditions differ significantly. The knowledge obtained could be applied in regulating the intensity of strand cooling with the aim of lowering the waste portion and improving the surface quality of worked products.     

Burst Detection by Water Demand Nowcasting Based on Exogenous Sensors

Bursts of drinking water pipes not only cause loss of drinking water, but also damage below and above ground infrastructure. Short-term water demand forecasting is a valuable tool in burst detection, as deviations between the forecast and actual water demand may indicate a new burst. Many of burst detection methods struggle with false positives due to non-seasonal water consumption as a result of e.g. environmental, economic or demographic exogenous influences, such as weather, holidays, festivities or pandemics. Finding a robust alternative that reduces the false positive rate of burst detection and does not rely on data from exogenous processes is essential. We present such a burst detection method, based on Bayesian ridge regression and Random Sample Consensus. Our exogenous nowcasting method relies on signals of all nearby flow and pressure sensors in the distribution net with the aim to reduce the false positive rate. The method requires neither data of exogenous processes, nor extensive historical data, but only requires one week of historical data per flow/pressure sensor. The exogenous nowcasting method is compared with a common water demand forecasting method for burst detection and shows sufficiently higher Nash-Sutcliffe model efficiencies of 82.7% - 90.6% compared to 57.9% - 77.7%, respectively. These efficiency ranges indicate a more accurate water demand prediction, resulting in more precise burst detection.