CODIRO: A New System for Obtaining Data Concerning Consumer Behavior Based on Data Factors of High Interest Determined by the Analyst

The aim of this paper is to propose a new system for the strategic use of customer data that includes and integrates such differing data sources as company databases, mobile telephone networks and Internet data and is a consumer research support system for the discovery of new marketing opportunities. This system, called CODIRO, will be discussed in this paper using a case study of the effects on sales of processed food product television commercials. A system for verifying the validity of consumer behavior models will also be described and discussed. Use of the CODIRO analysis system makes it easy to introduce, into the analytic model, consumer attitude changes and in-store data of many types that have not been used to measure advertising and promotional activity effectiveness in the past.     

Elution of copper from vermiculite with environmentally benign reagents

For the purpose of remediation of soils polluted by heavy metals, the use of some strong synthetic chelating agents such as ethylenediaminetetraacetic acid (EDTA) has been proposed. However, EDTA would not be considered as the preferential choice for the remediation of soil polluted with heavy metals like copper because of its nonbiodegradability and permanent residence in the natural environment. In the present work, some novel environmentally benign chelating agents, glucosamine hydrochloride, chito-oligosaccharide and -asparaginic-N,N-diacetic acid (ASDA) were screened to find alternatives to EDTA by investigating the elution of copper from vermiculite with these reagents and comparing their effectiveness with EDTA. The effects of suspension contact time, reagent concentration and equilibrium pH of the solution on the removal of copper were examined. A stoichiometric amount of EDTA can quantitatively remove copper in both acidic and neutral conditions. Chito-oligosaccharide was a slightly less-effective reagent under acidic conditions compared to EDTA, and an amount well in excess of stoichiometry is required to achieve the maximum removal of copper from vermiculite. Glucosamine hydrochloride shows a relatively weak ability for the liberation of copper. The elution behavior of ASDA was equivalent to EDTA in acidic and neutral media. It was concluded that ASDA is the best substitute for EDTA because of its similar high complexing ability and superior biodegradability.     

Hydroxyapatite crystal growth on calcium hydroxyapatite ceramics

Calcium hydroxyapatite (Ca-HAP) ceramics containing tricalcium phosphate (TCP) were soaked in three solutions: phosphate buffer, tris buffer, and simulated body fluid (SBF). Petal-like crystals of Ca-HAP were deposited on the Ca-HAP ceramics when (i) Ca-HAP ceramics contained -TCP, (ii) the soaking solution contained phosphate ion and (iii) the pH of soaking solution was higher than 7.3. These conditions facilitate the presence of HPO ₄ ^2– and Ca²⁺ ions, the latter from dissolution of -TCP. A well-defined X-ray diffraction pattern for the deposited Ca-HAP crystals indicates preferred growth of {002} planes. Slower crystal growth of Ca-HAP was found for SBF (pH=7.5) than in the phosphate buffer, due possibly to the lower phosphate ion content in SBF.     

Stromal CCL5 Promotes Breast Cancer Progression by Interacting with CCR3 in Tumor Cells

Chemokines secreted from stromal cells have important roles for interactions with carcinoma cells and regulating tumor progression. C-C motif chemokine ligand (CCL) 5 is expressed in various types of stromal cells and associated with tumor progression, interacting with C-C chemokine receptor (CCR) 1, 3 and 5 expressed in tumor cells. However, the expression on CCL5 and its receptors have so far not been well-examined in human breast carcinoma tissues. We therefore immunolocalized CCL5, as well as CCR1, 3 and 5, in 111 human breast carcinoma tissues and correlated them with clinicopathological characteristics. Stromal CCL5 immunoreactivity was significantly correlated with the aggressive phenotype of breast carcinomas. Importantly, this tendency was observed especially in the CCR3-positive group. Furthermore, the risk of recurrence was significantly higher in the patients with breast carcinomas positive for CCL5 and CCR3 but negative for CCR1 and CCR5, as compared with other patients. In summary, the CCL5-CCR3 axis might contribute to a worse prognosis in breast cancer patients, and these findings will contribute to a better understanding of the significance of the CCL5/CCRs axis in breast carcinoma microenvironment.     

Redox properties of CeO2 and Pt-Rh/CeO2 studied by TAP method

Redox properties of CeO₂ and Pt-Rh/CeO₂ were studied by temporal analysis of products (TAP) method using alternative pulses of CO and O₂. A portion of pulsed CO was oxidized to CO₂ and a portion of CO was adsorbed on the surface. Pulsing ¹⁸O₂ onto the catalyst which has surface species derived from CO, evolved CO₂ contained no ¹⁸O suggesting that the surface species will be carbonate ions.     

Improvement of Pt/ZrO2 by CeO2 for high pressure CH4/CO2 reforming

CH₄/CO₂ reforming over Pt/ZrO₂, Pt/CeO₂ and Pt/ZrO₂ with CeO₂ was investigated at 2 MPa. Pt/ZrO₂, which shows stable activity under 0.1 MPa, and Pt/CeO₂ showed gradual deactivation with time at the high pressure. The deactivation was suppressed drastically on Pt/ZrO₂ with CeO₂ prepared by different impregnation order (co-impregnation of Pt and CeO₂ on ZrO₂, and consecutive impregnation of Pt and CeO₂ on ZrO₂). The amount of coke deposition was found insignificant and similar among all the catalysts (including Pt/ZrO₂ and Pt/CeO₂). Catalytic activity after the reaction for 24 h was in agreement with Pt particle size after the reaction for same period, indicating that the difference of the catalytic stability is mainly dependent on the extent of Pt aggregation through catalyst preparation, H₂ reduction, and the CH₄/CO₂ reforming. Pt aggregation and the amount of coke deposition were least pronounced on (Pt–Ce)/ZrO₂ prepared by impregnation of CeO₂ on Pt/ZrO₂ and the catalyst showed highest stability.     

Adaptive control design for a class of nonsmooth nonlinear systems with matched and linearly parameterized uncertainty

This paper presents an adaptive control design for a class of nonsmooth nonlinear systems with matched uncertainty, which is linearly parameterized with a known discontinuous function. The design framework is based on the concept of the Filippov solution as the classical Lyapunov theory for smooth systems cannot be applied to establish the stability of the adaptive control system due to the presence of the discontinuity. It is proved that as an adaptive control system, the global Lyapunov stability with the convergence of the state of the controlled system to the origin can be achieved by evaluating the monotonicity of the Lyapunov function in the state space, particularly on the discontinuous surface, while the uniqueness of the solution of the closed‐loop system is not necessarily guaranteed. Some interesting numerical examples are demonstrated with simulation results. Copyright © 2008 John Wiley & Sons, Ltd.     

Locomotion Control of MEMS Microrobot Using Pulse‐Type Hardware Neural Networks

This paper presents the locomotion control of a microelectromechanical system (MEMS) microrobot. The MEMS microrobot demonstrates locomotion control by pulse‐type hardware neural networks (P‐HNN). P‐HNN generate oscillatory patterns of electrical activity like those of living organisms. The basic component of P‐HNN is a pulse‐type hardware neuron model (P‐HNM). The P‐HNM has the same basic features as biological neurons, such as the threshold, the refractory period, and spatiotemporal summation characteristics, and allows the generation of continuous action potentials. P‐HNN has been constructed with MOSFETs and can be integrated by CMOS technology. Like living organisms, P‐HNN has realized robot control without using software programs or A/D converters. The size of the microrobot fabricated by MEMS technology was 4 × 4 × 3.5 mm. The frame of the robot was made of a silicon wafer, equipped with rotary actuators, link mechanisms, and six legs. The MEMS microrobot emulated the locomotion method and the neural networks of an insect by rotary actuators, link mechanisms, and the P‐HNN. We show that the P‐HNN can control the forward and backward locomotion of the fabricated MEMS microrobot, and that it is possible to switch its direction by inputting an external trigger pulse. The locomotion speed was 19.5 mm/min and the step size was 1.3 mm. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 43–50, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22473     

Fundamental Theories on a Combined Energy Cycle of an Electrostatic Induction Hydrogen Electrolytic Cell and Fuel Cell to Produce Fully Sustainable Hydrogen Energy

A hydrogen electrolyzer for decomposition of stable compound H₂O is essentially an electronic device that uses mainly electrostatic‐to‐chemical energy conversion to produce a stoichiometric H₂+O₂ fuel. To achieve a breakthrough in the practical hydrogen electrolytic cell, we demonstrate the electrostatic induction potential superposed electrolyzer. This system operates on a mechanism in which, on a theoretical basis, the power used is 17% of the total electrical energy required, while the remaining 83% can be provided by electrostatic energy free of power. Because H₂O is placed in its decomposition state in the electrostatic field where no current flows, the decomposition voltage is identified as a barrier potential that the electrolytic current must overcome by expending the major part of the total system power. The potential superposition method for supplying energy to the cell was found to avoid the barrier potential effect within the laws of thermodynamics. Combining a fuel cell for producing power from pure H₂ and O₂ in stoichiometric proportions with this type of hydrogen electrolytic cell in a closed energy cycle can achieve a highly positive H₂ balance.