An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

Effect of 5-fluorouracil and UFT on experimental liver metastasis model of colorectal cancer using mouse colon 26 cells

Effects of 5-fluorouracil (5-FU) and UFT on an experimental liver metastasis model were compared at equi-effective dosage levels against subcutaneous tumor of mouse colon 26. 5-FU at the dosage level of 40 mg/kg suppressed the subcutaneous tumor growth by 70.0% and 45.0% on day 13 and day 18, respectively, and UFT at 20 mg/kg provided almost equal suppression (63.0% and 48.0%). In the liver metastasis model, 5-FU at 40 mg/kg showed more potent prevention of the formation of metastatic foci (94.9%) than did UFT (60.4%) at 20 mg/kg. 5-FU at 40 mg/kg produced a much higher peak serum level of 5-FU than did UFT at 20 mg/kg and also showed a much higher AUC (area under the curve) level in the portal blood. These results suggest that oral administration of 5-FU might be useful in prevention of liver metastasis of colorectal cancer.     

Purification, characterization, and mechanism of a flavin mononucleotide-dependent 2-nitropropane dioxygenase from Neurospora crassa

A nitroalkane-oxidizing enzyme was purified to homogeneity from Neurospora crassa. The enzyme is composed of two subunits; the molecular weight of each subunit is approximately 40,000. The enzyme catalyzes the oxidation of nitroalkanes to produce the corresponding carbonyl compounds. It acts on 2-nitropropane better than on nitroethane and 1-nitropropane, and anionic forms of nitroalkanes are much better substrates than are neutral forms. The enzyme does not act on aromatic compounds. When the enzyme reaction was conducted in an 18O2 atmosphere with the anionic form of 2-nitropropane as the substrate, acetone (with a molecular mass of 60 Da) was produced. This indicates that the oxygen atom of acetone was derived from molecular oxygen, not from water; hence, the enzyme is an oxygenase. The reaction stoichiometry was 2CH3CH(NO2)CH3 + O2-->2CH3COCH3 + 2HNO2, which is identical to that of the reaction of 2-nitropropane dioxygenase from Hansenula mrakii. The reaction of the Neurospora enzyme was inhibited by superoxide anion scavengers in the same manner as that of the Hansenula enzyme. Both of these enzymes are flavoenzymes; however, the Neurospora enzyme contains flavin mononucleotide as a prosthetic group, whereas the Hansenula enzyme contains flavin adenine dinucleotide.     

Analytical studies of four-inch pipe whip tests under BWR LOCA conditions

The purpose of pipe rupture studies in JAERI is to perform model tests on pipe whip, restraint behavior, jet impingement and jet thrust force, and to establish a computational method for analyzing these phenomena. This report presents the analytical results of 4-inch pipe whip tests under BWR LOCA conditions.Dynamic response analyses were performed using the general-purpose finite element program ADINA. The test pipe was modelled by straight beam elements and the four restraints were modelled by a single truss element. The analytical results were compared with the experimental results. Impact time and maximum total restraint force showed good agreement with experimental results. On the other hand, pipe strain and pipe deflection could not be predicted so well. The reason for this is that the sliding of the restraint during the pipe whip movement cannot be considered in the analyses.     

The role of aluminum in automotive weight reduction—part III

This series of articles provides, from an international perspective, an analysis of the future of the automotive industry and aluminum’s role in automobile weight reduction. Part I briefly described technological, environmental, and societal issues that are mandating vehicular weight reduction for, among other reasons, purposes of fuel economy. Part II described the status of the weight-reduction technologies that are currently available and projects how they may evolve in the coming years. Part III, the final installment, examines some of the specific strengths and weaknesses of aluminum alloys with regard to their long-term attractiveness to automakers.     

Polarization-controlled single-mode VCSEL

Relative intensity noise (RIN) in a vertical-cavity surface-emitting laser (VCSEL) was greatly reduced through the use of polarization control to eliminate competition between two orthogonal polarization states by ensuring there was only one polarization state. Polarization was stable with optical feedback of up to 10%. Polarization control was achieved by inducing a small loss anisotropy in fundamental transversal mode VCSEL's. Anisotropic post structures, such as a rectangular post, an oblique post, or a zigzag-sidewall post, were found to be effective in creating loss anisotropy without serious degradation of other VCSEL characteristics such as light-output power or beam profile     

Immunohistochemical profile of basic fibroblast growth factor and heparan sulphate in adult rat mandibular condylar cartilage

Basic fibroblast growth factor (bFGF) and heparan sulphate (HS) were detected immunohistochemically in mandibular condylar cartilage, and the findings compared with those on epiphyseal articular cartilage. In the condylar cartilage, both bFGF and HS were localized in chondrocytes throughout the various zones including the fibrous, proliferative, mature-cell and hypertrophic zones: bFGF immunostaining was most significant in the proliferative and mature-cell zones, while intense staining for HS was found mainly in the hypertrophic zone. Immunoreaction for bFGF was detected in the nuclei of chondrocytes, whereas HS staining was observed in the cytoplasm. In articular cartilage, only chondrocytes beneath the superficial zone (intermediate zone) demonstrated both bFGF and HS immunoreactivities. Chondrocytes in the deeper calcifying region of the articular cartilage did not immunoreact for either bFGF or HS. These findings suggest that, in contrast to the epiphyseal articular cartilage, a continuous bFGF-mediated remodelling of cells and matrix takes place in mandibular condylar cartilage during the process of endochondral ossification.     

Band Gap Modification of Diamond Photonic Crystals by Changing the Volume Fraction of the Dielectric Lattice

Photonic crystals with a diamond structure of epoxy lattices in which TiO₂-based ceramic particles are dispersed were fabricated by stereolithography. The periodicity of the lattice was designed to reflect electromagnetic waves in the gigahertz range. The volume fraction (β) of the dielectric lattice medium was modified from 14% to 33% by changing the rod diameter of the lattice. The photonic band gap was observed along Γ-L 〈111〉, Γ-X 〈100〉, and Γ-K 〈110〉 directions and the complete photonic band gap was formed at over β= 20%. The width of the forbidden gap increased gradually when the β increased over 14%, and reached 2.4 GHz at β= 33%. These results agreed with the band calculation using the plane wave expansion method.