Development of co-continuous structure in liquid crystalline polyester

We investigated liquid crystallization of liquid crystalline polyester BB-5 during isothermal annealing by digital high-fidelity microscope and light scattering. A liquid crystalline spherical domain having a radius of micrometers appeared by annealing at around 180 °C. The domain grew dendritically in all directions. Neighboring liquid crystalline regions coalesced and then interconnected. The interconnected structure changed to a co-continuous two-phase structure with increasing ordering of the liquid crystalline phase, and the interface between the liquid crystalline phase and the isotropic phase became smoother over time. Liquid crystallization stopped before volume filling the whole space, and the liquid crystalline phase and isotropic phase coexisted. The liquid crystalline region became narrower with an increase in the temperature of the liquid crystallization. Such structural development is different from the liquid-liquid phase separation via spinodal decomposition, and it may be attributed to the segregation of non-liquid crystallizable low molecular weight molecules from the growth front by fractionation of the molecular weight distribution during the liquid crystallization in terms of the instability of the diffusion-controlled interface.     

Photochemical identification of transmembrane segment IVS6 as the binding region of semotiadil, a new modulator for the L-type voltage-dependent Ca2+ channel

To identify the binding domain of a new Ca2+ antagonist semotiadil on L-type Ca2+ channels from skeletal muscle, photolabeling was carried out by using an azidophenyl derivative of [3H]semotiadil. Photoincorporation was observed in several polypeptides of membrane triad preparations; the only specific photoincorporation was in the alpha1 subunit of the Ca2+ channel. After solubilization and purification, the photolabeled alpha1 subunit was subjected to proteolytic and CNBr cleavage followed by antibody mapping. Specific labeling was associated solely with the region of transmembrane segment S6 in repeat IV. Quantitative immunoprecipitation was found in the tryptic and the Lys-C/Glu-C fragments of 6.6 and 6.1 kDa, respectively. Further CNBr cleavage of the Lys-C digests produced two smaller fragments of 3.4 and 1.8 kDa that were included in the tryptic and Lys-C/Glu-C fragments. The smallest labeled fragments were: Tyr1350-Met1366 and Leu1367-Met1381 containing IVS6, a possible pore-forming region. The data suggest that semotiadil binds to a region that is overlapped with but not identical to those for phenylalkylamines, dihydropyridines and benzothiazepines. The present study also provides evidence that region IV represents an important component of a binding pocket for Ca2+ antagonists.     

Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

Surface tension of liquid3He and4He near the liquid-gas critical point

The surface tension of liquid³He and⁴He was measured near the gas-liquid critical points in the reduced temperature range 3×10^–4–1, where t (T _c –T)/T _c . The critical exponents were found to be ₃=1.289±0.015 for³He and ₄=1.306±0.017 for⁴He. These values are very close to those for classical liquids, and are consistent with the value of 1.28 predicted by Widom, but are apparently different from the exponents previously obtained for liquid helium isotopes, which are near unity. The critical coefficients show good agreement with the quantum-corrected corresponding states theory for the Lennard-Jones 6–12 potential discussed by Young. The interface thickness is deduced from Widom's theory to bed=d ₀t^–v withd ₃₀=0.14±0.03nm and v₃=0.57±0.04 for³He, andd ₄₀=0.37±0.07 nm and v₄=0.58±0.01 for⁴He.     

Induction of Tertiary Phase Epileptiform Discharges after Postasphyxial Infusion of a Toll-Like Receptor 7 Agonist in Preterm Fetal Sheep

Background: Toll-like receptor (TLR) agonists are key immunomodulatory factors that can markedly ameliorate or exacerbate hypoxic–ischemic brain injury. We recently demonstrated that central infusion of the TLR7 agonist Gardiquimod (GDQ) following asphyxia was highly neuroprotective after 3 days but not 7 days of recovery. We hypothesize that this apparent transient neuroprotection is associated with modulation of seizure-genic processes and hemodynamic control. Methods: Fetuses received sham asphyxia or asphyxia induced by umbilical cord occlusion (20.9 ± 0.5 min) and were monitored continuously for 7 days. GDQ 3.34 mg or vehicle were infused intracerebroventricularly from 1 to 4 h after asphyxia. Results: GDQ infusion was associated with sustained moderate hypertension that resolved after 72 h recovery. Electrophysiologically, GDQ infusion was associated with reduced number and burden of postasphyxial seizures in the first 18 h of recovery (p < 0.05). Subsequently, GDQ was associated with induction of slow rhythmic epileptiform discharges (EDs) from 72 to 96 h of recovery (p < 0.05 vs asphyxia + vehicle). The total burden of EDs was associated with reduced numbers of neurons in the caudate nucleus (r² = 0.61, p < 0.05) and CA1/2 hippocampal region (r² = 0.66, p < 0.05). Conclusion: These data demonstrate that TLR7 activation by GDQ modulated blood pressure and suppressed seizures in the early phase of postasphyxial recovery, with subsequent prolonged induction of epileptiform activity. Speculatively, this may reflect delayed loss of early protection or contribute to differential neuronal survival in subcortical regions.     

Novel Constitutive Equation for Predicting Dynamic Recrystallization During Hot Working Considering the Efficiency of Power Dissipation

The efficiency of power dissipation (η) in a dynamic material model has been conventionally used for qualitative predictions to estimate the hot working conditions at which dynamic recrystallization (DRX) is dominant. However, predicting the quantitative value of the DRX fraction (X_DRX) from η remains a challenge. In this paper, a constitutive equation is proposed to quantitatively predict X_DRX using η. The proposed equation for describing X_DRX is derived from the reaction rate equation using the assumption that the DRX rate depends on η. The proposed equation is verified via hot compression tests of equiaxed Ti–6Al–4V ELI alloys (Ti-64) in the (α + β) region. The predicted and experimental X_DRX values are found to be generally consistent with one another, exhibiting an average absolute error of 0.05. Furthermore, the proposed equation provides the same level of prediction accuracy as the conventional Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation. Therefore, the proposed equation can be used to quantitatively predict X_DRX following hot compression tests of equiaxed Ti-64. Moreover, compared with the JMAK equation, the proposed equation is expressed in fewer parameters and constant terms. It is, thus, expected to facilitate the quantitative prediction of X_DRX.

     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.     

Effect of high temperature plastic strain with dynamic strain ageing on sensitization of type 304 stainless steel

The effect of plastic strain in the range 298 to 923 K on sensitization of type 304 stainless steel has been studied by means of electrochemical potentiokinetic reactivation (EPR) method and 10% oxalic acid etch (10% OAE) technique. The results are compared with those of isothermal sensitization heat treatment. The increase in degree of sensitization by plastic strain at 573 K was small. On the other hand, the sensitization by plastic strain at 723 K, was accelerated significantly, i.e. 20 times faster than the isothermal treatment, and that by plastic strain at 823 and 923 K was 6 times faster. It is shown that the dynamic strain ageing in range 450 to 570 K, which might be due to C or N diffusion, has a slight effect on sensitization, while the dynamic strain ageing in range 700 to 870 K, which might be due to Cr diffusion, accelerates the sensitization substantially.     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Platform design for large-scale artificial market simulation and preliminary evaluation on the K computer

Artificial market simulations have the potential to be a strong tool for studying rapid and large market fluctuations and designing financial regulations. High-frequency traders, that exchange multiple assets simultaneously within a millisecond, are said to be a cause of rapid and large market fluctuations. For such a large-scale problem, this paper proposes a software or computing platform for large-scale and high-frequency artificial market simulations (Plham: /pl\(\Lambda\)m). The computing platform, Plham, enables modeling financial markets composed of various brands of assets and a large number of agents trading on a short timescale. The design feature of Plham is the separation of artificial market models (simulation models) from their execution (execution models). This allows users to define their simulation models without parallel computing expertise and to choose one of the execution models they need. This computing platform provides a prototype execution model for parallel simulations, which exploits the variety in trading frequency among traders, that is, the fact that some traders do not require up-to-date information of markets changing in millisecond order. We evaluated a prototype implementation on the K computer using up to 256 computing nodes.