Magnetic and Electrical Properties of Glass and Glass-Ceramics Based on Weathered Basalt

Silicon - A total of six glass batches (WB100-WB50) based primarily on weathered basalt with successive addition of bypass cement dust (with the weight content 0–50%) were melted at...     

Optimal packing of transformer coil via dynamic programming

One of the transformer major design elements is its core design. The good performance of the transformer requires its coil core to be laminated and composed of different - widths stepped layers of specific steel packed together. For optimum design, the cross sectional shape of the core must be as circular as possible. So, an optimal packing can be attained by maximizing the steel core coverage. The number of different widths of steel plates n is selected to compose the packed core for a coil of diameter d. Then, an optimum sequence of decisions, for the n widths as well as the number of thin plates of each, is required. Dynamic programming (dp) is concerned with this optimum sequential decisions. An adequate forward recursive equation is formulated , because there isn't a standard dp model for all sequential decision making problems. To implement the recursive computations, a FORTRAN program is developed. Assuming that d is given the values 150, 200, 250, 300, 400 and 500 mm. while giving n the values from 2 to 15, the program is run at different combinations of n and d. It is found that maximum core coverage is sensitive to changing of n but it is slightly affected by changing of d.     

Thermal–hydraulic modeling of the onset of flow instability in MTR reactors

Prediction of the onset of the flow instability (OFI) in steady and transient sub-cooled flow boiling is an important consideration in the design and operation of nuclear reactors, in particular for materials testing reactors (MTR). In this study, a predictive model for OFI in the MTR has been developed. The model is based on both the heat balance during the bubble generation and condensation processes, and the force balance for the detached bubbles at the onset of significant void (OSV). The only adjustable coefficient involved in the proposed model is quantified by comparison with the experimental data of Whittle and Forgan [Whittle, R.H., Forgan, R., 1967. A correlation for the minima in the pressure drop versus flow-rate curves for sub-cooled water flowing in narrow heated channels. Nucl. Eng. Des. 6, 89–99], which covers the wide range of MTR operating conditions. The model predictions are compared with predictions of some previous models, and it is shown that the present model results in smaller deviation from the experimental data. A correlation for the heat flux at OFI is also developed based on the present model. The developed correlation gives lower deviation from the experimental data than the well-known correlation of Whittle and Forgan. The model is also used to predict the OFI locus during a transient, where it shows good agreement with the short transient data of Lee and Bankoff [Lee, S.C., Bankoff, S.G., 1993. Prediction of the onset of flow instability in transient sub-cooled flow boiling. J. Nucl. Eng. Des. 139, 149–159] as well.     

Experimental Evaluation of Solar Kiln for Drying Wood

Semi-greenhouse solar dryer was designed and constructed in the Solar Energy Department, National Research Center, Cairo, Egypt. It consists of steel frame structure and all the sides were insulated and covered by galvanized iron sheet. The roof faces south with a tilt angle of 30° and covered by glass sheets. Corrugated iron sheets, painted black on the top, were fixed beneath the glass roof as an absorber. The humidity inside the solar kiln is controlled by inlet vent at south wall and two outlet vents at north wall. Data Capture System was designed to ease the measurements and to capture the measured data automatically and continuously for 24 h a day. The selected local wood type is Casuarina, which is common in Egypt, and it is commonly used in many simple industries. The experimental results with this type of wood show considerable agreements with the simulated ones. A comparison was made between experimental results of solar wood drying and traditional air-drying. The results show that timber boards were dried inside solar kiln to moisture content of 12% within 17 days, where air dying moisture content was limited to 20% for the same period.     

Self-aligned SiGe NPN transistors with 285 GHz f/sub MAX/ and 207 GHz f/sub T/ in a manufacturable technology

This paper reports on SiGe NPN HBTs with unity gain cutoff frequency (f_T) of 207 GHz and an f_MAX extrapolated from Mason's unilateral gain of 285 GHz. f_MAX extrapolated from maximum available gain is 194 GHz. Transistors sized 0.12×2.5 μm² have these characteristics at a linear current of 1.0 mA/μm (8.3 mA/μm²). Smaller transistors (0.12×0.5 μm²) have an f_T of 180 GHz at 800 μA current. The devices have a pinched base sheet resistance of 2.5 kΩ/sq. and an open-base breakdown voltage BV_CEO of 1.7 V. The improved performance is a result of a new self-aligned device structure that minimizes parasitic resistance and capacitance without affecting f_T at small lateral dimensions     

Dielectric Properties of Basaltic Glass and Glass-Ceramics: Modeling and Applications as Insulators and Semiconductors

Silicon - Sinai basaltic rocks were melted as glass and casted into disc- and rode-shapes and subjected to thermal treatment to induce crystallization as a glass-ceramic. The dominant crystalline...     

A 210-GHz fT SiGe HBT with a non-self-aligned structure

A record 210-GHz f_T SiGe heterojunction bipolar transistor at a collector current density of 6-9 mA/μm² is fabricated with a new nonself-aligned (NSA) structure based on 0.18 μm technology. This NSA structure has a low-complexity emitter and extrinsic base process which reduces overall thermal cycle and minimizes transient enhanced diffusion. A low-power performance has been achieved which requires only 1 mA collector current to reach 200-GHz f_T. The performance is a result of narrow base width and reduced parasitics in the device. Detailed comparison is made to a 120-GHz self-aligned production device     

Brownian dynamics simulations of rigid rod-like macromolecular particles flowing in bounded channels

Brownian dynamics simulations have been carried out of the joint probability distribution functions (PDF), P(ξ,θ), for macromolecular rod-like particles in the limit of infinite dilution in a solution under hydrodynamic linear flow. These PDF are calculated as a function of the orientations of the rod-like particles, θ and of the positions, ξ, of their centres of mass measured from a solid surface boundary. These simulations are developed in the neighbourhood of a solid surface boundary and in a confined space bounded by two such boundaries. They are constructed for a wide range of key quantities depicting the ratio of the hydrodynamic shear rate to the rotational Brownian diffusion coefficient. The notion of restitution is introduced to develop an algorithm for the consequences of the Brownian and hydrodynamic collisions of these macromolecules with impenetrable solid surface boundaries, which approach applies to a wide range of surfaces and macromolecules. The simulation results for the PDF distributions are given for typically low and high hydrodynamic flow conditions, and their properties are discussed. We show, for example, for low shear rates that a phenomenon which we call Brownian restitution enables the macromolecular rods to pass through a channel that is narrower than the rod length.