A Smart Hyperthermia Nanofiber-Platform-Enabled Sustained Release of Doxorubicin and 17AAG for Synergistic Cancer Therapy

This study demonstrates the rational fabrication of a magnetic composite nanofiber mesh that can achieve mutual synergy of hyperthermia, chemotherapy, and thermo-molecularly targeted therapy for highly potent therapeutic effects. The nanofiber is composed of biodegradable poly(ε-caprolactone) with doxorubicin, magnetic nanoparticles, and 17-allylamino-17-demethoxygeldanamycin. The nanofiber exhibits distinct hyperthermia, owing to the presence of magnetic nanoparticles upon exposure of the mesh to an alternating magnetic field, which causes heat-induced cell killing as well as enhanced chemotherapeutic efficiency of doxorubicin. The effectiveness of hyperthermia is further enhanced through the inhibition of heat shock protein activity after hyperthermia by releasing the inhibitor 17-allylamino-17-demethoxygeldanamycin. These findings represent a smart nanofiber system for potent cancer therapy and may provide a new approach for the development of localized medication delivery.     

热压/热变形Nd2Fe14B/α-Fe纳米双相永磁体的研究

为了制备各向异性块状Nd2Fe14B／α—Fe纳米双相永磁体，研究了热压／热变形工艺参数与样品微观组织结构、磁性能之间的关系。结果表明，饱和磁化强度Js随模压温度的升高而提高；而剩磁Jr、内禀矫顽力Hcj和最大磁能积(BH)max开始都随模压温度的升高而上升，但超过一定温度后反而降低；同时提高热压压力会使磁性能增加，而热变形温度对磁性能影响很小。热变形后样品垂直于压力方向的磁性能略高于平行于压力方向，呈现出轻微的各向异性。Nd2Fe14B／α—Fe纳米双相永磁材料在热压／热变形后没有产生晶粒的择优长大，在晶体学上仍然是各向同性的。     

Formation of 2,4-dinitrophenylhydrazones in high-density polyethylene film irradiated with ultraviolet light

Polyethylene films were irradiated in air by ultraviolet light. 2,4-Dinitrophenylhydrazine was reacted on the irradiated films. The changes in amounts of carbonyl groups and 2,4-dinitrophenynlhydrazones formed in the films were inferred by comparing their absorptions in the infrared and ultraviolet spectra, respectively. It seems that the contents of carbonyl groups formed in the amorphous regions in the high-density polyethylene films by the irradiation were larger than the contents of carbonyl groups formed in the amorphous regions in the low-density polyethylene films. The decreases in contact angles of water on the high-density polyethylene films by the irradiation were larger than the decreases in the contact angles on the low-density polyethylene films. The amounts of 2,4-dinitrophenylhydrazones formed in the irradiated high-density polyethylene films were less than the amounts of 2,4-dinitrophenylhydrazones formed in the irradiated low-density polyethylene films.     

Change of polypropylene film surface by chromic acid mixture treatment

Polypropylene films were treated with chromic acid mixture. The change in the treated films was investigated by comparing change in amount of 2,4-dinitrophenylhydrazones formed in the treated films with their change in wettability with water. Oxidation of the film surface zone, partial breakdown of polymer in the film surface zone, and oxidation of surface zone bared from the film inner zone seemed to occur with increase in treatment time or with increase in treatment temperature.     

Anisotropic Thermal Expansion of β-Ca2SiO4 Monoclinic Crystal

Crystals of β-Ca₂SiO₄ (space group P 12₁/ n 1) were examined by high-temperature powder X-ray diffractometry to determine the change in unit-cell dimensions with temperature up to 645°C. The temperature dependence of the principal expansion coefficients (α_i) found from the matrix algebra analysis was as follows: α₁= 20.492 × 10⁻⁶+ 16.490 × 10⁻⁹ ( T - 25)°C⁻¹, α₂= 7.494 × 10⁻⁶+ 5.168 × 10⁻⁹( T - 25)°C⁻¹, α₃=−0.842 × 10⁻⁶− 1.497 × 10⁻⁹( T - 25)°C⁻¹. The expansion coefficient α₁, nearly along [302] was approximately 3 times α₂ along the b -axis. Very small contraction (α₃) occurred nearly along [     01]. The volume changes upon martensitic transformations of β↔α_L' were very small, and the strain accommodation would be almost complete. This is consistent with the thermoelasticity.     

Closed Form Solution of Local Shape from Shading at Critical Points

In the theory of shape from shading, behaviours of the local solution around a critical point of the image play an important role. This paper shows that the second derivatives of the object surface can be locally determined at these image critical points. Closed form expressions of the surface second derivatives in terms of the second derivatives of the image brightness and of the reflectance map are shown. They are derived as follows: By differentiating the image irradiance equation twice at an image critical point, a set of polynomial equations is obtained that contains the second derivatives of the surface, of the image brightness and of the reflectance map. Regarding these equations as simultaneous equations for unknown surface second derivatives, they are algebraically solved and their explicit expressions are derived. Such a derivation is possible only at image critical points and is impossible at any other image point. The applicability of the derived expressions to noisy images is tested using synthetic images.     

High-intensity multi-bunch beam generation by a photo-cathode RF gun

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a ‘BNL-type IV’ RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.     

Visual image of neighbors to elicit wandering behavior in the soldier crab

The soldier crab appears in great numbers and feeds while wandering during daytime low tide. When they see an approaching object, they screw themselves into the sand. The mechanism of formation of mass wandering has not been clarified. In this study, to investigate if the soldier crabs use visual images of neighbors as a stimulus for wandering, dummy crabs were presented to crabs. In the experiments, one, two, four, or eight dummies were placed in a circle on a sand arena. Each crab was placed in the center of the arena and observed whether it burrowed into the sand or wandered. The proportions of wandering individuals in each experimental treatment were compared with the expected value. Significantly more crabs were wanderers when only two and four dummies were present. This result suggests that soldier crabs chose burrowing or wandering depending on visual image of the distribution of the neighbors.