IL-4- and IL-5-secreting lymphocyte populations are preferentially stimulated by parasite-derived antigens in human tissue invasive nematode infections

Helminth infections in humans and animals are associated with strong T helper 2 (Th2) responses. To determine whether parasite-derived Ag preferentially expand a Th2-like cell population, a filter immunoplaque assay was used to enumerate the frequencies (F0) of PBMC and CD4(+)-enriched PBMC from individuals with helminth infections secreting selected cytokines in response to parasite-derived (PAg) and nonparasite antigens (NPAg). In 20 individuals with lymphatic filariasis, frequency analysis of PBMC secreting IL-4 and IFN-gamma indicated that the F0 of PAg-specific IL-4-secreting cells (geometric mean F0 (GM): 1/12,100) was 57-fold higher than the corresponding F0 of NPAg-reactive cells (GM: 1/692,000; p < 0.02). In marked contrast, the F0 of IFN-gamma-secreting cells responding to PAg (GM: 1/2,700) did not differ from those of cells specific for NAPg (GM: 1/3,400; p = 0.83). In another group of helminth-infected individuals, the F0 of highly enriched CD4+ cells secreting IL-4 and IL-5 in response to PAg (GMs: 1/2,600 and 1/5,600 CD4+ cells, respectively) were also found to be significantly higher than those specific for NPAg (GMs: 1/291,000 and 1/303,000 CD4+; p < 0.05 and p < 0.01, respectively), whereas the corresponding F0 of IFN-gamma- and granulocyte-macrophage-CSF-secreting cells were equivalent for PAg and NPag. Furthermore, the proportion of PAg-specific IL-4- and IL-5-secreting CD4+ cells relative to all cells secreting the given cytokine were approximately 29-fold higher than the proportion of NPAg-specific cells secreting these cytokines. Again, the corresponding proportions of Ag-specific IFN-gamma-and GM-CSF-secreting CD4+ cells were equivalent for PAg and NPAg. Thus, in this ex vivo system, a circulating population of IL-4- and IL-5-secreting (Th2-like) cells has been shown to exist in humans; PAg appears to expand these cells preferentially.     

A prototype 3D optically interconnected neural network

We report the implementation of a prototype three-dimensional (3D) optoelectronic neural network that combines free-space optical interconnects with silicon-VLSI-based optoelectronic circuits. The prototype system consists of a 16-node input, 4-neuron hidden, and a single-neuron output layer, where the denser input-to-hidden-layer connections are optical. The input layer uses PLZT light modulators to generate optical outputs which are distributed over an optoelectronic neural network chip through space-invariant holographic optical interconnects. Optical interconnections provide negligible fan-out delay and allow compact, purely on-chip electronic H-tree type fan-in structure. The small prototype system achieves a measured 8-bit electronic fan-in precision and a calculated maximum speed of 640 million interconnections per second. The system was tested using synaptic weights learned off system and was shown to distinguish any vertical line from any horizontal one in an image of 4×4 pixels. New, more efficient light detector and small-area analog synapse circuits and denser optoelectronic neuron layouts are proposed to scale up the system. A high-speed, feed-forward optoelectronic synapse implementation density of up to 10⁴/cm² seems feasible using new synapse design. A scaling analysis of the system shows that the optically interconnected neural network implementation can provide higher fan-in speed and lower power consumption characteristics than a purely electronic, crossbar-based neural network implementation     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Inelastic post-buckling analysis of truss structures by dynamic relaxation method

The paper presents the inelastic post-buckling analysis of truss structures by the Dynamic Relaxation (DR) method. A simplified inelastic finite element formulation for truss element and new algorithms are proposed for Elastic Post-Buckling (EPB) analysis and Inelastic Post-Buckling (IEPB) analysis using the DR method. The post-buckling paths for elastic, EPB and IEPB analyses are completely traced using the variable-arc-length method. Four numerical examples are presented to illustrate the application of the proposed algorithms.     

Microstructural developments in Mg-Ti-PSZ systems

The microstructure of titania-added Mg-partially-stabilized zirconia (PSZ) is dramatically influenced by thermal treatments. Effects of various sintering, heat-treatment and thermal shock cycling parameters on the microstructure of the Mg-Ti-PSZ system are described. Conditions favourable for the growth of needle-like Ti-rich reinforcements in highly thermalshock-resistant Mg-Ti-PSZ ceramics are identified. TiO₂ seems to play a catalytic role in the formation of Zr-rich networks during high-temperature (1700°C) sintering of the Mg-Ti-PSZ system, quite similar to those found in Mg-PSZ, heat-treated above 1300 °C.     

Correction to the Fukuda-Kawata Young's modulus theory and the Fukuda-Chou strength theory for short fibre-reinforced composite materials

The theories for modulus and strength of short fibre-reinforced composite materials are based on the calculation of the force sustained by fibres crossing an arbitrary line perpendicular to the applied load, called the scan line, in a thin, rectangular specimen. The widely referenced Fukuda-Kawata modulus theory and the Fukuda-Chou strength theory are based on an apparently incorrect procedure for the calculation of the force sustained by the fibres crossing the scan line. The error is explained in detail by comparing the Fukuda-Kawata modulus theory and the Cox modulus theory. The magnitude of this error is calculated for specific cases.     

Oxide scale stresses in polycrystalline Ni200

An X-ray diffraction (sin² ψ) method has been successfully used to measure the oxidation stresses at room temperature in annealed and electropolished samples of polycrystalline Ni200 coupons oxidized in the temperature range 760 to 982° C for 4 h. The stresses on the free surface of the oxide (σ ₁₁ andσ ²²) were compressive and the average stress through the thickness normal to the oxide layer was found to be tensile. Surface stresses on the oxides formed at temperatures up to 927° C were found to be isotropic and both surface stresses and the average normal stress increased with increasing temperature of oxidation. At 982° C, the surface stresses were lower and this was attributed to the deformation and fracture of oxide layer resulting in stress relaxation.     

Electrochemical behaviour of Mn3+/Mn2+, Co3+/Co2+ and Ce4+/Ce4+ redox mediators in methanesulfonic acid

The redox behaviour of Mn³⁺/Mn²⁺, Co³⁺/Co²⁺ and Ce⁴⁺/Ce³⁺ mediators commonly used in indirect oxidation of organic compounds were evaluated in methane sulfonic acid on a glassy carbon working electrode employing cyclic voltammetry. Manganic methanesulfonate exhibits higher instability in dilute methanesulfonic acid. The solid MnO₂ formed during disproportionation on the glassy carbon electrode further affects the reproducibility. Cobaltic methanesulfonate formation occurs only at oxygen evolution region rendering the overall oxidation process less efficient. Ceric methane sulfonate formation is highly efficient over a wide acid concentration range. Ceric methanesulfonate can also be employed over a wide temperature range to oxidize different aromatic compounds.     

VOID FRACTION PROFILES IN PLANE-POISEUILLE FLOW OF VISCOELASTIC FOAMS

This investigation focuses on slow, isothermal, two-phase flow of gas bubble suspensions in Separan solutions, prepared with the help of a sodium borohydride blowing agent at room temperature. The total residence time in these experiments is much smaller than characteristic times for growth or rise of bubbles. The variation of bubble volume fraction across a narrow gap between two planes, is recorded at two locations along the flow direction. This is done with a Cesium gamma-radiation source focused on a region of area.012 cm² in the flow plane, and a Sodium iodide detector across the channel yielding a resolution of.01 over the range of void fractions investigated from.02 to.08. This measurement allows us to identify conditions under which the two-phase flow may be described by a two fluid model with a uniform bubbly core and a bubble free wall layer. With this two phase flow structure, a relative viscosity equation for the suspension is used to compute an apparent viscosity. Such calculations indicate that the observed reduction in apparent viscosity for the two phase flow may be attributed to a bubbly core which is more shear thinning than the medium. The additional shear thinning factor for the suspension is related to the elasticity of the medium.