Inhibition of atmospheric corrosion of mild steel by sodium benzoate treatment

The objective of this study was to evaluate the effectiveness of sodium benzoate as an inhibitor to slow down or prevent atmospheric corrosion/discoloration of the local mild steel during storage in the Arabian Gulf region. Test specimens were prepared from locally produced reinforcing steel products. The inhibitor solution was applied on steel specimens at a concentration of 100 mM for 1 day at room temperature. Wooden exposure racks were used to hold as-received and inhibitor-treated specimens during atmospheric exposure for different periods. Corrosion was evaluated through weight loss determination and electrochemical technique. As expected, the Arabian Gulf atmosphere was corrosive on the as-received local mild steel. On the other hand, treatment of steel with sodium benzoate lowered its corrosion rate during initial days of its exposure to atmosphere. However, atmospheric corrosion inhibition performance of sodium benzoate deteriorated with exposure time after 30 or more days of atmospheric exposure, and the corrosion rates of sodium benzoate-treated specimens reached that of the unprotected specimens at the end of 90 days of atmospheric exposure.     

Performance failure analysis of EDFA cascades in optical DWDM packet-switched networks

A simple and comprehensive technique to determine the probability that a cascade of erbium-doped fiber amplifiers (EDFAs) may be driven into unacceptable regimes of bit error rate (BER) and/or gain levels is presented. This technique allows network designers to determine the tolerances by which the signal power levels may deviate from their predesigned average values and still give acceptable gain variances and BERs at the receiver. We show that even in the signal power range well above the receiver sensitivities (-38 dBm/ch) where the gain spread is not significant, the corresponding spread in BER due to random arrival of packets might result in unacceptable performance. We show for typical levels of operation, the BER temporarily (for about 3 /spl mu/s) deviates to below 10/sup -9/ (10/sup -15/) with a probability of 10/sup -3/ (10/sup -2/), for 100 (64) channels. We show that the gain spread for a single EDFA can be negligible for a range of signal and pump powers at a given average gain.     

Formation of the Fe(II)-Fe(III) hydroxysulphate green rust during marine corrosion of steel

Rust layers formed on steel sheet piles immersed 1 m above the mud line for 25 years were analysed by Raman spectroscopy, scanning electron microscopy and elemental X-ray mappings (Fe, S, O). They consist of three main strata, the inner one mainly composed of magnetite, the intermediate one of iron(III) oxyhydroxides and the outer one of hydroxysulphate green rust GR(SO₄²⁻). Simulations of GRs formation in solutions having large [Cl⁻]/[SO₄²⁻] ratios revealed that the hydroxysulphate GR(SO₄²⁻) was obtained instead of the hydroxychloride GR(Cl⁻), as demonstrated by X-ray diffraction and transmission Mössbauer spectroscopy analyses. Measurements of the [S], [Fe] and [Cl] concentrations allowed us to establish that GR(SO₄²⁻) formed along with a drastic impoverishment of the solution in sulphate ions; the [Cl⁻]/[SO₄²⁻] ratio increased from 12 to 240. The GR, acting like a “sulphate pump”, may favour the colonisation of the rust layers by sulphate reducing bacteria.     

Fuzzy multiattribute evaluation of R&D projects using a real options valuation model

R&D project selection decision is very important in two ways. First, in many organizations, R&D budget represents huge investment. Project selection decisions could be thought with the strategic objectives and plans of the firm. Second, R&D projects' organizational returns are multidimensional in nature and risky in terms of projected outcome. Real options approach helps to calculate this risky side of the selection process. This paper considers that multidimensional side of the R&D project selection process. Another consideration is the vagueness in the evaluation process. The fuzzy analytic hierarchy process, which takes monetary (fuzzy real option value) and nonmonetary (capability, success probability, trends, etc.) criteria into account, is used to make this selection among alternative R&D projects. A real case study is given to illustrate the application of the proposed approach. © 2008 Wiley Periodicals, Inc.     

Preparation of photo curable highly hydrophobic coatings using a modified castor oil derivative as a sol-gel component

Modification and use of natural products have gained a lot of interest in recent years due to their environmental friendliness and their availability from different sources. In this study castor oil based photo curable highly hydrophobic coatings were prepared and characterized. Castor oil (CO) was first modified with 3-isocyanato propyl triethoxy silane and then it was hydrolyzed prior to the coating preparation. The resulting precursor was mixed with norbornyl acrylate, hexane diol diacrylate and hydrophobic coatings were prepared with the aid of fluorinated and nonfluorinated alkoxy silane coupling agents. The addition of fluorine showed a significant impact on the properties of the coatings. As the fluorine content was increased in the formulations, flame retardancy and the contact angle values of the coatings increased. The highest amount of fluorine containing coating showed a contact angle of 119°. Then with the addition of nonfluorinated alkoxysilane compounds, a contact angle of 130° was reached. Also the effect of post-cure temperature on contact angle values was investigated.     

Photocrosslinked biobased phase change material for thermal energy storage

A series of novel photocrosslinked biobased shape‐stabilized phase change materials (PCMs) based on octadecanol, eicosanol and docosanol have been prepared by UV technique for the purpose of thermal energy storage applications. Epoxidized soybean oil was reacted with acrylic acid to form acrylated soybean oil (ASO). The structure and composition, cross‐section morphology, thermal stability performances and phase change behaviors of ASO and UV‐cured PCMs were examined by using Attenuated total reflection fourier transform infrared spectroscopy, thermogravimetric analysis system (TGA), scanning electron microscopy, and differential scanning calorimetry. The results indicate that the UV‐cured biobased PCMs possess perfect phase change properties and a suitable working temperature range. The heating process phase change enthalpy is measured between 30 and 68 J/g, and the freezing process phase change enthalpy is found between 18 and 70 J/g. The decomposition of UV‐cured PCMs started at 260 °C and reached a maximum of 430 °C. All the biobased UV‐cured PCMs improved latent heat storage capacity in comparison with the pristine ASO sample. With the obtained results we conclude that, these materials promise a great potential in thermal energy storage applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43757.     

Preparation and evaluation of linseed oil based alkyd paints

Alkyd resins are produced with reaction of oil or fatty oil, polyol and polyacid. Alkyd resins are commonly used in coating and paint industry due to ease of application in changing environmental conditions. Linseed oil based paints executed all requirements of technical properties, drying time, storage properties, simplicity in maintenance, appearance, economy, etc. In this study, linseed oil based alkyd resins having different oil contents were synthesized     

Hybrid dual-curable cyanate ester/boron phosphate composites via sequential thiol-ene photopolymerization and thermal polymerization

The aim of this study was to improve hybrid dual-curable cyanate ester/boron phosphate composites via sequential thiol-ene photopolymerization and thermal polymerization for high performance applications such as aerospace and electronic devices. A novel 2,2′-diallylbisphenol A dicyanate ester (DA-BADCy) which is the allyl group containing cyanate ester was synthesized and characterized. DA-BADCy, silicon containing monofunctional thiol compound, trifunctional thiol compound and boron phosphate were cured using both ultraviolet (UV) and thermal methods. Using thiol-ene system, cyanate ester formulations, which are normally prepared at high temperatures, were prepared at room temperature. This study maintains ease of application for cyanate esters. Thermal stability, flammability and thermal conductivity of the samples were evaluated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), limiting oxygen index (LOI) and laser flash method, respectively. The samples were characterized with the following analysis; gel content, water absorption capacity and stress–strain test. Hydrophobicity of the samples was determined by the contact angle measurements. Moreover, the surface morphology of the samples was investigated by a scanning electron microscopy (SEM–EDS). The obtained results prove that the composites have good thermal and mechanical properties and with the help of easier preparation techniques, they can be used in many applications such as aerospace, electronic devices, materials engineering.