Thermoplastic elastomers based on epoxidized natural rubber and high‐density polyethylene blends: Effect of blend compatibilizers on the mechanical and morphological properties

Epoxidized natural rubber (ENR) with a level of epoxide groups of 20 mol % was prepared via the performic epoxidation method. It was then used to blend with high‐density polyethylene (HDPE) at various blend ratios. Three types of blend compatibilizers were prepared. These included a graft copolymer of HDPE and maleic anhydride (MA; i.e., HDPE‐g‐MA) and two types of phenolic modified HDPEs using phenolic resins SP‐1045 and HRJ‐10518 (i.e., PhSP‐PE and PhHRJ‐PE), respectively. We found that the blend with compatibilizer exhibited superior tensile strength, hardness, and set properties to that of the blend without compatibilizer. The ENR and HDPE interaction via the link of compatibilizer molecules was the polar functional groups of the compatibilizer with the oxirane groups in the ENR molecules. Also, another end of the compatibilizer molecules (i.e., HDPE segments) was compatibilizing with the HDPE molecules in the blend components. The blend with compatibilizer also showed smaller phase morphology than the blend without compatibilizer. Among the three types of the blend compatibilizer, HDPE‐g‐MA provided the blend with the greatest strength and hardness properties but the lowest set properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of incorporation sequence of silica nanoparticles on morphology,crystallization behavior,mechanical properties,and thermal resistance of melt blended thermoplastic natural rubber

Thermoplastic natural rubber nanocomposites based on epoxidized natural rubber (ENR) and polypropylene blends at a fixed blend ratio of 50/50 wt% reinforced with small amount (2.5 wt%) of nanosilica (SiO₂) were prepared by melt‐mixing through three different incorporation sequences in an internal mixer. The effects of incorporation techniques on morphology, crystallization behavior, mechanical properties, dynamic, rheological characteristics, and thermal resistance of thermoplastic natural rubber (TPNR) nanocomposites were investigated. It was found that the dispersion of nanosilica in TPNRs was significantly dependent on the incorporation sequence. In the case where SiO₂ was premixed in ENR before blending with polypropylene (PP), the final morphology showed the good dispersion of SiO₂ in ENR phase, while the SiO₂ particles were localized near the PP interface when SiO₂ was premixed the in PP first. Whereas, when the three components were simultaneously mixed, the SiO₂ particles were mainly dispersed in the PP phase. It was also found that the improvements of Young's modulus, tensile strength, damping behavior, and thermal stability of TPNR nanocomposites were more pronounced when the SiO₂ particles localized in ENR phase. By contrast, the presence of SiO₂ particles in PP domain either near the interface or inside the PP phase affected the reduction in crystallinity of PP phase and showed a negative effect on mechanical properties due to the poor interface interaction between PP and SiO₂ particles. POLYM. COMPOS., 33:1911–1920, 2012. © 2012 Society of Plastics Engineers     

Effects of crosslinked elastomer particles on heterogeneous nucleation of isotactic PP in dynamically vulcanized EPDM/PP and EOC/PP blends

The isothermal and non-isothermal crystallizations of PP in neat form and in the TPVs EPDM/PP and EOC/PP were investigated using differential scanning calorimetry (DSC). The crystallization of PP was systematically studied by fitting mathematical models, and was later confirmed by X-ray diffraction (XRD) and by scanning electron microscopy (SEM). The experiments revealed that crosslinked elastomer particles first accelerated the primary nucleation of the PP matrix, acting effectively as a nucleating agent that reduces the induction time while increasing the nucleation efficiency. In the secondary nucleation regime (growth of spherulites), the crosslinked elastomer particles enhanced crystal growth rate, reducing the nucleation energy contribution from PP chain folding. Moreover, the crosslinked elastomer particles increased the final thickness of PP lamellae from that of neat PP, and this was corroborated by the XRD results. On comparing the two types of elastomer, it was found that the EOC particles were more effective in heterogeneous cell nucleation than the EPDM particles. The morphological study by SEM revealed completely altered PP spherulite size and shape, as well as their altered distribution, affected by heterogeneous nucleation effects of the crosslinked elastomer particles.     

Influences of blend proportions and curing systems on dynamic,mechanical, and morphological properties of dynamically cured epoxidized natural rubber/high‐density polyethylene blends

Thermoplastic elastomers (TPEs) based on dynamically cured epoxidized natural rubber/high‐density polyethylene (ENR/HDPE) blends were prepared. Influence of the process oil, blend proportion, and curing systems were investigated. It was found that the oil‐extended thermoplastic vulcanizates (TPVs) exhibited better elastomeric properties and improved ease of the injection process. Increasing the proportion of ENR caused increasing elastic response of elongation at break, tension set properties, and tan δ. It was also found that the TPV treated with phenolic resin exhibited superior mechanical properties and the smallest vulcanized rubber domains. The TPV treated with the conventional peroxide co‐agent curing system showed superior strength properties but had poor elastomeric properties. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers