Off-Site Exposure to Respirable Aerosols Produced during the Disk-Incorporation of Class B Biosolids

Field experiments were conducted at a Class B biosolids land application site in central Arizona to measure, model, and source-track the off-site transport of aerosols emitted when biosolids were disk-incorporated into soils. Real-time PM10 monitoring provided time-resolved aerosol information sufficient for verifying both off-site concentration and off-site exposure time model results. Under the conditions considered and at a distance of 165?m from the aerosol source, biosolids disk-incorporation resulted in an intermittent exposure to biosolids-derived aerosol concentration between 15 and 40?μg/m3 and an inhalable biosolids dose between 2 and 8?μg. Transport modeling predicted that these doses will decrease with increasing wind speed. In addition, three DNA sequence-based biosolids source tracking methods were applied to aerosol samples and confirmed the presence of biosolids in aerosols at 5, 65, and 165?m from the aerosol source. Field measurements and modeling indicate that the nature of biosolids-derived aerosol exposure is a series of intermittent high concentration puffs, rather than a continuous low concentration.     

Jitter considerations in the design of a 10-Gb/s automatic gain control amplifier

The effects of noise on random jitter in multistage broad-band amplifiers are analyzed. Limiting amplifiers are compared to automatic gain control (AGC) amplifiers with different gain profiles. Results are presented for a 10-Gb/s AGC amplifier implemented in an SiGe process with f_T of 45 GHz. Active peaking techniques were used to achieve a maximum gain of 48 dB with 7.8 GHz of bandwidth. The amplifier demonstrates low jitter and less than 0.5 dB of peak-to-peak output amplitude variation over a 50-dB input amplitude range. It consumes 30 mW of power from a 3.3-V supply. The amplifier core occupies 0.1 mm² and requires no external components     

A model with length scales for composites with periodic structure. Steady state heat conduction problem

A new high-order model for analysing distribution of temperature in periodic composites is proposed. The original scalar elliptic problem with Y-periodic coefficients (Y is a cube) is replaced with a vectorial elliptic problem of constant coefficients. The unknown fields are: the averaged distribution of temperature and the vector field which stands for perturbation of the temperature within the cells of periodicity. The recovery of temperature in the original composite is given by the approximation: 0(x)=0(x) +h ^a (x/) _a (x) analogous with the first terms of the two-scale asymptotic expansion known from the homogenization theory. The functions h are defined as approximations of the solutions to the basic cell problems. In contrast to the two-scale expansion the expression for satisfies the boundary condition.     

An architecture for software that adapts to changes in requirements

The goal of the research presented in this paper was to study a new software paradigm – adaptive software – in which the structure of an adaptive program is patterned upon the structure of an adaptive controller. Towards this aim, we implemented a domain-specific (object/target recognition) program (A Reconfigurable Architecture for Adapting to Changes in the Requirements (RAACR)) that can adapt to changes in software requirements through the incorporation of feedback. RAACR is a hierarchy of domains (blackboards). Each domain includes multiple knowledge sources (KSs) and a domain scheduler (DS). In response to feedback, KSs change their processing parameters, while DSs change the scheduling policy of the KSs. A generic communication mechanism is implemented on the CORBA compliant SPRING operating system. The adaptability of the program is evaluated quantitatively using a requirements volatility measure and the probability of correct recognition.     

Surface layer condition and the fatigue strength of an AZ91 alloy after ball peening

The present work compares the states of the surface textures and the oscillatory fatigue strengths of specimens made of an AZ91 alloy after turning and dynamic bearing ball peening. It was found that the specimens ball peened at different time have similar surface geometric structure parameters but different strengthening intensity. It was shown that fatigue strength follows greater peening intensity and random and isotropic surface. It was also ascertained that improving (by peening) the condition of the surface layer means enhancing fatigue strength by 20–87% compared with turning.     

N‐Oligo(3‐hydroxybutyrate)‐functionalized polypyrroles: towards bio‐erodible conducting copolymers

New copolymer materials have been prepared by chemical grafting of oligomeric 3‐hydroxybutyric acid (OHB) onto polypyrrole (PPy) derivatives. The influence of grafting density and molecular weight of OHB brushes on the physicochemical properties of prepared copolymers was investigated. PPy substrates were prepared by FeCl₃‐driven oxidative homopolymerization of N‐(2‐carboxyethyl)pyrrole or its copolymerization with pyrrole. The grafting method employed involved controlled anionic polymerization of β‐butyrolactone on pyrrole‐tethered potassium carboxylate active sites. Obtained PPy‐g‐OHB copolymers of varying grafting density and pendant polyester chain length were characterized and the observed structure–property relationships discussed. The impact of real time exposure to phosphate‐buffered saline environment was investigated and the residue products were characterized. Cross‐correlation of spectroscopic, thermal, electrical and elemental analysis data afforded comprehensive evaluation of the structure of prepared materials and their behaviour in hydrolytic medium. Erosion and degradation pathways have been identified, indicating ways to consciously tailor the physicochemical properties of these new biomimetic materials. © 2016 Society of Chemical Industry     

Photoinduced nonlinear optics in Sb2Se3–BaCl2–PbCl2 glasses

Photoinduced structural transformations in amorphous Sb₂Se₃–BaCl₂–PbCl₂ glasses were studied using a differential IR spectroscopy Fourier technique in the spectral region between 100 and 300 cm⁻¹. A stage of the reversible photodarkening is realized in the Sb₂Se₃ fragments after the first cycle of photoexposure and thermoannealing. The whole scheme of the photo- and thermoinduced transformations in the amorphous system may be explained as a coordination of formation and annihilation of defects. The vibrational density of states calculated using quantum chemical solid state methods confirms our experimental results and their interpretation. Photoinduced photodarkening changes using a CO₂ pulse laser (λ=10.6 μm) in new synthesized Sb₂Se₃–BaCl₂–PbCl₂ glasses were investigated. At the same time we have studied photoinduced second harmonic generation (SHG) and two-photon absorption (TPA). The possibility of using this glass as perspective materials for IR optoelectronics and nonlinear optics was shown.     

Effect of minority carrier injection on lateral current in MIS tunnel structures

In this work it is shown that the MIS structure with an ultra-thin $\text{(20}\text{A}\text{?}\text{< x}{}_{\mathrm{i}}\text{< 40}\text{A}\text{?}\text{)}$ oxide is distinguished by a unique mechanism of lateral conduction. The flow of the lateral current between the two metal electrodes formed on the surface of an ultra-thin silicon dioxide is found to take place through the silicon substrate and the two non-equilibrium MIS tunnel diodes formed by the metal electrodes, the ultra-thin oxide, and the silicon. One of these diodes is forward biased and the other reverse biased. It is shown that the main limitation to the lateral current comes from the reverse biased diode. A structure is proposed in which such a lateral current can be efficiently controlled by the injection of minority carriers from the gate of an appropriately formed, conventional MIS tunnel diode into the depletion region of the reverse biased diode, so limiting the lateral current. Various physical phenomena related to this effect are studied and discussed.The MIS lateral tunnel structure considered in this work was fabricated in order to investigate the influence of minority carrier injection on the lateral conduction in MIS tunnel devices. However, the ideas proposed in this work can be developed into useful device structures.     

Depth Dependence of Nanoindentation Pile-Up Patterns in Copper Single Crystals

A study of the dependence of nanoindentation pile-up patterns on the indentation load and crystallographic orientation is presented. Three different orientations—(001), (011), and (111)—of single crystal copper were investigated. Experiments were conducted on a CSM ultra-nanoindentation tester using a Berkovich tip. The topographic images were obtained using an atomic force microscope. The evolution of pile-up patterns with different applied loads was observed. The results show that for applied loads equal to 0.45 mN and smaller the pile-up patterns do not depend on the crystallographic orientation of the indented surface; instead, they depend on the tip’s geometry. On the other hand, in the case of indentation loads bigger than 2 mN, pile-up patterns on the surfaces of (001)-, (011)-, and (111)-oriented single crystals have fourfold, twofold, and sixfold (or threefold) symmetry, respectively. An intermediate state was also reported. Furthermore, a detailed analysis of residual impressions with maximal applied loads equal to 2 mN and bigger reveals that both pile-up and sink-in patterns are present.     

Block Iterations in the Complex Plane

In this note we propose a new technique for execution of the feedback process  z → z²+ c  . The presented method is used to discover a family of sets in the complex plane.