It is critical to develop an appropriate dye degrading technique to preserve the natural environment and human health owing to the dangerous water pollution caused by effluent dyes. So, in this work, a ZSM-5/TiO2/Ni photocatalyst was synthesized as a novel composite and used for degrading methylene blue dye in the solution. The sol–gel approach was used to immobilize titanium dioxide nanoparticles on the ZSM-5 surface, and the resulting photocatalyst was then modified using nickel nanoparticles to improve its photocatalytic performance. The nanocomposite was characterized using different tools such as FE-SEM, EDX, XRD, FT-IR, TGA, and UV–Vis spectrophotometer. The XRD confirmed that the synthesized composite has the characteristic TiO2 peaks. FE-SEM images of ZSM-5 exhibited rough, uneven, and jagged surfaces. A distinct shift in the morphology of the surface resulted when titanium dioxide was fully immobilized on the surface of ZSM-5. Shape complexity and surface roughness of the particles are elevated in the case of the ZSM-5/TiO2/Ni nanocomposite. The maximum % degradation of 50 mL of 15 mg/L of methylene blue dye is 99.17% and achieved at pH?=?8, irradiation time?=?140 min, and photocatalyst dosage?=?0.05 g. The synthesized composite can be regenerated and reused several times without losing its efficacy.
相似文献In this paper, the hydrothermal method was utilized for the facile synthesis of copper chromite nanoparticles in the absence (abbreviated as CC1) and presence of citric acid (abbreviated as CC2) and tartaric acid (abbreviated as CC3) as templates. The synthesized nanoparticles were characterized using different tools such as XRD, FT-IR, UV–Vis, FE-SEM, HR-TEM, and BET. The average crystallite size of the CC1, CC2, and CC3 samples is 25.45, 20.26, and 12.75 nm, respectively. The FT-IR spectra show two bands in the range 613–616 cm?1 and 511–514 cm?1, which are characteristic of the spinel copper chromite crystalline structure. The optical energy gaps of the CC1, CC2, and CC3 samples are 1.25, 1.88, and 1.92 eV, respectively. The synthesized nanoparticles were used for the degradation of the acid orange 7 dye under visible light irradiations. The highest % degradation was obtained at pH?2.5 and irradiation time?=?40 min. The % degradation of the acid orange 7 dye using CC1, CC2, and CC3 photocatalysts at pH?2.50 and time?=?40 min is 87.38, 96.52, and 98.81, respectively. The degradation of the acid orange 7 dye was markedly reduced with the addition of isopropyl alcohol or disodium ethylenediaminetetraacetate, confirming that the hydroxyl radicals and holes routes play a fundamental role in the degradation process of the acid orange 7 dye. The degradation of the acid orange 7 dye is slightly affected by the addition of ascorbic acid, confirming a minor concentration of oxygen anion radicals.
相似文献