Emissions control policies under uncertainty and rational learning in a linear-state dynamic model

We compare the use of price-based policies or taxes, and quantity-based policies or quotas, for controlling emissions in a dynamic setup when the regulator faces two sources of uncertainty: (i) market-related uncertainty; and (ii) ecological uncertainty. We assume that the regulator is a rational Bayesian learner and the regulator and firms have asymmetric information. In our model the structure of Bayesian learning is general. Our results suggest that the expected level of emissions is the same under taxes and quotas. However, the comparison of the total benefits related to these policies suggests that taxes dominate quotas, that is, they provide a higher social welfare. Even though taxes have some benefits over quotas, neither learning nor ecological uncertainty affect the choice of policy, i.e., the only factor having such an impact is uncertainty in the instantaneous net emissions benefits (market-related uncertainty). Besides, the more volatile is this uncertainty, the more benefits of taxes over quotas. Ecological uncertainty leads to a difference between the emissions rule under the informed and the rational learning assumptions. However, the direction of this difference depends on the beliefs bias with regard to ecological uncertainty. We also find that a change in the regulator’s beliefs toward more optimistic views will increase the emissions.     

Free vibration analysis of double-viscoelastic nano-composite micro-plates reinforced by FG-SWCNTs based on the third-order shear deformation theory

Microsystem Technologies - In this paper, free vibration analysis of a double viscoelastic nano-composite plate system reinforced by functionally graded single-walled carbon nanotubes (FG-SWCNT)...     

Biosynthesis of SeNPs by Mycobacterium bovis and their enhancing effect on the immune response against HBs antigens: an in vivo study

Conventional hepatitis B vaccine contains alum but is less effective to induce Th1 response. Selenium nanoparticles and Bacillus Calmette–Guerin were reported as immune modulators. In this study, SeNPs were extracted from Mycobacterium bovis and characterised. SeNPs were mixed with HBs‐Ag and administered to the mice to investigate he immune response pattern. With an addition of Se ions at a sub‐inhibitory concentration to the Sauton medium broth after 24 h, SeNPs were extracted from M. bovis and characterised by Fourier transform infrared spectroscopy, dynamic light scattering, atomic forcemicroscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, and thermogravimetric analysis. Furthermore, female inbred BALB/c mice were injected subcutaneously on the first, 14th, 28th day with 100 and 200 µg doses of that SeNPs supplemented with HBs‐Ag vaccine. Later, the total antibody, isotypes of Immunoglobulin G1, Interlukin 4, and interferon‐γ were measured by enzye‐linked immunosorbent assay. The size of the SeNPs was <150 nm. Level of total antibody and immunoglobulin G2a increased significantly in the group that received 200 µg/ml nano selenium extracted from M. bovis. SeNPs in dose of 200 µg coated with organic materials of M. bovis could induce an influential immune response in relation to the conventional HBs‐Ag vaccine.Inspec keywords: selenium, nanoparticles, nanofabrication, microorganisms, Fourier transform spectra, infrared spectra, light scattering, atomic force microscopy, X‐ray chemical analysis, transmission electron microscopy, thermal analysis, nanomedicineOther keywords: biosynthesis, selenium nanoparticles, Mycobacterium bovis, enhnced immune response, HBs antigens, Bacillus Calmette‐Guerin, immune modulators, biogenic SeNPs, immune response pattern, Sauton medium broth, Fourier transform infrared spectroscopy, dynamic light scattering, atomic force microscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, thermogravimetric analysis, female inbred BALB/c mice, antibody, IgG1 isotype, IgG2a isotype, IL₄ isotype, interferon‐γ, enzyme‐linked immunosorbent assay, bacterium, time 24 h, time 14 day, time 28 day, Se     

Simultaneous kinetic spectrophotometric determination of sulfide and sulfite ions by using an optode and the partial least squares (PLS) regression

The characterization of an optical sensor membrane is described for simultaneous determination of sulfite and sulfide ions based on the immobilization of crystal violet on a triacetylcellulose membrane. The absorbance of the membranes decreased by increasing sulfite and sulfide concentration. The partial least squares (PLS-1) calibration model based on spectrophotometric measurement for simultaneous determination of sulfite and sulfide ions was applied. This method is based on the difference between the rate of the reaction of sulfide and sulfite with membranes in pH 7.0 buffer solution and at 25 °C. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 18 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range of 200–2000 μg mL⁻¹ (2.5–25 mmol L⁻¹) and 80–900 μg mL⁻¹ (2.5–28.125 mmol L⁻¹) for sulfite and sulfide, respectively. The sensor can readily be regenerated with water and the color is fully reversible. The sensor was successfully applied to the simultaneous determination of sulfide and sulfite in water samples.     

A novel ACO–GA hybrid algorithm for feature selection in protein function prediction

Protein function prediction is an important problem in functional genomics. Typically, protein sequences are represented by feature vectors. A major problem of protein datasets that increase the complexity of classification models is their large number of features. Feature selection (FS) techniques are used to deal with this high dimensional space of features. In this paper, we propose a novel feature selection algorithm that combines genetic algorithms (GA) and ant colony optimization (ACO) for faster and better search capability. The hybrid algorithm makes use of advantages of both ACO and GA methods. Proposed algorithm is easily implemented and because of use of a simple classifier in that, its computational complexity is very low. The performance of proposed algorithm is compared to the performance of two prominent population-based algorithms, ACO and genetic algorithms. Experimentation is carried out using two challenging biological datasets, involving the hierarchical functional classification of GPCRs and enzymes. The criteria used for comparison are maximizing predictive accuracy, and finding the smallest subset of features. The results of experiments indicate the superiority of proposed algorithm.     

A new fuzzy decision-making procedure applied to emergency electric power distribution scheduling

In this paper a new fuzzy decision-making procedure is developed. Two levels of weightings, called upper and lower weights, are proposed to calculate the fuzzy weightings of different criteria. The preference table is introduced to calculate the upper and lower weights. Also a new method is developed to determine the expected preference values of different alternatives. These values are used for generating the priority list of alternatives. The procedure is applied for providing an emergency electric power distribution, scheduling time table. The IEEE 14-bus standard system and a 14-bus system with four power plants are considered as case studies. Using fuzzy decision-making procedure, the regions with more priorities are more connected to the distribution net, while the maximum consumption criterion is also reasonably respected.     

Domestic Water and Sanitation in Cyclones and Floods in Bangladesh and a Proposed Research Agenda

ABSTRACT

Water is one of the top priority item s i relief activities but the appropriateness and effectiveness of this activity may be questioned. Water and sanitation (WS) are inseparable and together they play major roles in the transmission of the pathogen of diarrhoeal disease. Thousands of people die or suffer from WS-related diseases during postdisaster periods. Here we present WS-related experiences gained after Bangladesh's 1991 cyclone and the views of participants in a regional and a national (local) workshop on this matter held in Bangladesh. About 63 per cent of the water purifying tablets (WPTs) distributed after the 1991 cyclone were found to have lost potency Relief personnel lack basic knowledge about WS practices and the management of WS provision. Participants in the two workshops documented serious problems i this field at both regional and national levels. Major issues for research may include: an appropriate environmental preparedness plan; appropriate waste disposal technologies; appropriate water treatment methods; self- help activities during vulnerable periods; and health education related to WS in disaster situations.     

Determining the Main Factors in Declining the Urmia Lake Level by Using System Dynamics Modeling

Urmia Lake in Iran is the second largest saline lake in the world. This ecosystem is the home for different species. Due to various socio-economical and ecological criteria, Urmia Lake has important role in the Northwestern part of the country but it has faced many problems in recent years. Because of droughts, overuse of surface water resources and dam constructions, water level has decreased in such a way that one quarter of the lake has changed to saline area in the last 10 years. The purpose of this research is to determine the main factors which reduce the lake’s water level. To this end, a simulation model, based on system dynamics method, is developed for the Urmia Lake basin to estimate the lake’s level. After successful verification of the model, results show that (among the proposed factors) changes in inflows due to the climate change and overuse of surface water resources is the main factor for 65% of the effect, constructing four dams is responsible for 25% of the problem, and less precipitation on lake has 10% effect on decreasing the lake’s level in the recent years. In the future, the model also can be used by managers as a decision support system to find the effects of building new dams or other infrastructures.     

Adaptive Control for State Synchronization of Nonlinear Haptic Telerobotic Systems with Asymmetric Varying Time Delays

In this paper, we introduce a new adaptive controller design scheme for nonlinear telerobotic systems with varying time delays where the delays and their variation rates are unknown. The designed controller has the ability to synchronize the state behaviors of the local and the remote robots. In this paper, asymptotic stability in the presence of varying time delays is of interest. Using the proposed controller, asymptotic stability of the bilateral telerobotic system subject to any bounded yet unknown varying delay with a bounded yet unknown rate of change can be guaranteed. Besides the varying time delay, the proposed adaptive controller has the ability to adapt to the parameter variations in the local and the remote robots’ dynamics. It is shown that position and velocity errors between the local and the remote manipulators converge to the zero asymptotically, thus ensuring teleoperation transparency. Experimental and simulation results with a pair of PHANToM haptic devices and a pair of planar manipulators under varying time delays in the communication channel demonstrate the effectiveness of the proposed scheme.     

An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach

Reverse logistics consists of all operations related to the reuse of products. External suppliers are one of the important members of reverse logistics and closed loop supply chain (CLSC) networks. However in CLSC network configuration models, suppliers are assessed based on purchasing cost and other factors such as on-time delivery are ignored. In this research, a general closed loop supply chain network is examined that includes manufacturer, disassembly, refurbishing, and disposal sites. Meanwhile, it is managed by the manufacturer. We propose an integrated model which has two phases. In the first phase, a framework for supplier selection criteria in RL is proposed. Besides, a fuzzy method is designed to evaluate suppliers based on qualitative criteria. The output of this stage is the weight of each supplier according to each part. In the second phase, we propose a multi objective mixed-integer linear programming model to determine which suppliers and refurbishing sites should be selected (strategic decisions), and find out the optimal number of parts and products in CLSC network (tactical decisions). The objective functions maximize profit and weights of suppliers, and one of them minimizes defect rates. To our knowledge, this model is the first effort to consider supplier selection, order allocation, and CLSC network configuration, simultaneously. The mathematical programming model is validated through numerical analysis.