Frequency dependence of the complex dielectric constant of sodium carboxymethyl cellulose

The dielectric constant, ε′, and dielectric loss, ε″, were determined for three solid carboxymethyl cellulose samples having different levels of substitution and different degrees of polymerization over a frequency range of 0.1 – 10 000 kHz at temperatures from 10–60°C. In contrast to the two relaxation processes, γ and β, previously observed in native cotton cellulose, only one relaxation process within a frequency range of 0.1 – 1 kHz was identified. It was found that the dielectric properties do not only depend on the degree of substitution, but also on the weight-average degree of polymerization and uniformity of distribution.     

The choice of optimal checking strategies for error control in structural engineering

Probabilistic models are given for estimatingthe error content in a structure afte.r thre" application of a checking strategy with given efficiency. The use of these models to optimize the level of effort expended on error control is illustrated. The analysis is carried out using-a Bayesian-decisiorv-theory approach,-and an overall model for structural decision-making is described. The applicability of the approach is illustrated by an example which considers the overall checking efficiency in the building process, combined with some failure statistics and failure cost estimates. The application of the approach to specific structural members is also discussed in the paper.     

Dual formation of carpets of large carbon nanofibers and thin crystalline carbon nanotubes from the same catalyst-underlayer system

A dense, micron-tall layer of carbon nanofibers (CNFs) was grown above a layer of carbon nanotubes (CNTs) during the same synthesis using a thick cobalt catalyst (15 nm). The CNFs had large diameters (100 nm) and were amorphous while the CNTs had small diameter (10–20 nm) and were crystalline. Base growth mechanism was at play for both the nanofibers and the nanotubes. High-resolution transmission electron microscopy characterization suggested that the main mechanisms leading to the growth of the two structures were based on the dewetting of the catalyst layer and its subsequent alloying with the Ta underlayer. We can extend these principles to grow diverse carbon nanostructures during the same synthesis using appropriate multilayer thin films for different applications, especially for electrochemical cells and supercapacitors.     

Precursor gas chemistry determines the crystallinity of carbon nanotubes synthesized at low temperature

Despite significant progress in carbon nanotube (CNT) synthesis by thermal chemical vapor deposition (CVD), the factors determining the structure of the resulting carbon filaments and other graphitic nanocarbons are not well understood. Here, we demonstrate that gas chemistry influences the crystal structure of carbon filaments grown at low temperatures (500 °C). Using thermal CVD, we decoupled the thermal treatment of the gaseous precursors (C₂H₄/H₂/Ar) and the substrate-supported catalyst. Varying the preheating temperature of the feedstock gas, we observed a striking transition between amorphous carbon nanofibers (CNFs) and crystalline CNTs. These results were confirmed using both a hot-wall CVD system and a cold-wall CVD reactor. Analysis of the exhaust gases (by ex situ gas chromatography) showed increasing concentrations of specific volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs) that correlated with the structural transition observed (characterized using high-resolution transmission electron microscopy). This suggests that the crystallinity of carbon filaments may be controlled by the presence of specific gas phase precursor molecules (e.g., VOCs and PAHs). Thus, direct delivery of these molecules in the CVD process may enable selective CNF or CNT formation at low substrate temperatures. The inherent scalability of this approach could impact many promising applications, especially in the electronics industry.     

Histochemical analysis of bandage contact lens precipitates.

Contact lens deposits have been reported previously with extended wear of soft contact lenses, with proteins, lipids, mucous, and various salts such as chloride, potassium and calcium being deposited on the lens surface [1]. We report an unusual case of precipitates on the surface of a bandage contact lens (BCL) following intensive treatment with topical preservative free artificial tears. Evaluation included microscopic and histochemical analysis of the BCL. We have also reviewed the literature for previous reports of contact lens precipitates.     

Resting hemodynamics after total versus standard orthotopic heart transplantation in patients with high preoperative pulmonary vascular resistance

OBJECTIVE: Pretransplant pulmonary vascular resistance > or = 4 Wood-units predisposes to right ventricular failure after heart transplantation. Total orthotopic heart transplantation with bicaval and pulmonary venous anastomoses offers synchronous contractions of the atria and a normal ventricular filling pattern, but requires longer ischemic time than standard orthotopic heart transplantation. To test if total orthotopic heart transplantation improves resting hemodynamics in pts with high preoperative pulmonary vascular resistance, we analyzed 65 pts with standard and 65 with total orthotopic heart transplantation transplanted between 12/88 and 7/94. Of these, 18 with total and 15 with standard orthotopic heart transplantation had a preoperative pulmonary vascular resistance > or = 4 Wood-units. METHODS: Right heart catheterization data were obtained at each endomyocardial biopsy. All data from biopsies at both 2 weeks and 1 year posttransplant that were free from humoral or greater than 1A cellular rejection (9 versus 13 pts) were included in a two way ANOVA. Pts with postop pacemakers, atrial fib or beta-blocker therapy at the time of biopsy were excluded. RESULTS: Ischemic time was different (172 +/- 44 versus 142 +/- 28 min, P = 0.03). Demographics, NYHA class, pre-TX hemodynamics, donor age and inotropes were similar. Cardiac output and index were higher in the total orthotopic group at 2 weeks (6.5 +/- 1.7 versus 5.1 +/- 1.0 l/min; 3.4 +/- 0.9 versus 2.8 +/- 0.6 l/min per m2) and 1 year (7.1 +/- 2.0 versus 4.9 +/- 1.1 l/min, P = 0.002; 3.6 +/- 1.1 versus 2.6 +/- 0.5 l/min per m2, P = 0.009). Right atrial and pulmonary arterial mean pressure (mmHg) were lower with total orthotopic heart transplantation at 2 weeks (6 +/- 4 versus 9 +/- 5, P = 0.04; 22 +/- 3 versus 25 +/- 7, P = 0.1) and 1 year (5 +/- 2 versus 7 +/- 3, P = 0.02; 19 +/- 4 versus 25 +/- 7, P = 0.03). Pulmonary capillary wedge pressure (mmHg) was borderline nonsignificant (11 +/- 4 versus 13 +/- 7 at 2 weeks, 8 +/- 3 versus 14 +/- 5 at 1 year, P = 0.055), as well as pulmonary vascular resistance (1.9 +/- 1 versus 2.5 +/- 1 at 2 weeks, 1.5 +/- 0.6 versus 2.7 +/- 1.7 WU at 1 year, P = 0.051). CONCLUSIONS: Total orthotopic heart transplantation improves cardiac output and index in pts with high preoperative pulmonary vacular resistance. There is a lower mean RA and PA pressure perhaps due to less tricuspid and mitral regurgitation. In view of the frequently observed restrictive filling pattern after cardiac transplantation, total orthotopic heart transplantation can be beneficial until this pattern has subsided by preserving atrioventricular synchrony and offering better atrial transport.     

Dispersion of Asphaltene Precipitation in Egyptian Crude Oil Using Corrosion Inhibitors

Three corrosion inhibitors are examined in this work to control asphaltene precipitation in Egyptian heavy crude oil. Dodecylbenzenesulfonic acid (DBSA), 4-nonylphenyl-polyethylene glycol, and synthetic cationic gemini surfactant: N₂,N₃-didodacyl-N₂,N₂,N₃,N₃-tetramethylbutane diaminium bromide displayed highest capacity to inhibit asphaltene deposition. The H¹-NMR spectroscopy was used to confirm the chemical structure of the synthetic inhibitor. The efficiency of the studied additives as corrosion inhibitors are evaluated by weight loss method using the same crude oil. The effect of the mentioned corrosion inhibitors as asphaltene inhibitors is studied. The studied inhibitors are with dual nature for inhibition of both corrosion and asphaltene precipitation.     

The Critical Role of the Underlayer Material and Thickness in Growing Vertically Aligned Carbon Nanotubes and Nanofibers on Metallic Substrates by Chemical Vapor Deposition

Vertically aligned carbon nanotubes and nanofibers are grown on metallic Ta and Pd underlayers at temperatures below 500 °C. Controlling the size of the grains of the underlayer film is critical because this leads to a more uniform distribution of catalyst dots, which in turn results in vertical alignment of the carbon nanostructures. Rapid and limited heating and appropriate materials selection can also be used to limit catalyst/underlayer reactions that hinder or suppress carbon nanostructure growth or that lead to entangled growth. Control of catalyst reactivity with metallic underlayers is significant because growth on conductive substrates is notoriously difficult, but needed for many applications such as the use of carbon nanostructures in microelectronic circuits.