Impact behavior of aminosilane functionalized nanosilica based shear thickening fluid impregnated Kevlar fabrics

In the present work, two types of shear thickening fluids have been synthesized by using neat and aminosilane functionalized silica nanoparticles and their viscosity curves have been obtained by the rheometer. Based on the values of peak viscosity of synthesized shear thickening fluids, the surface functionalized nanosilica based shear thickening fluid has been chosen as a best candidate due to the high viscosity for impregnation into the neat Kevlar of different layers viz. four (04) and eight (08) layers for velocity impact study. The experimental investigations reveal high energy absorption of shear thickening fluid impregnated Kevlar as compared to the neat Kevlar. The maximum energy absorption 62 J is achieved corresponding to the initial velocity 154 m∙s⁻¹ for 08 layers shear thickening fluid impregnated Kevlar specimen. The data have also been analytically determined and validated with the experimental data. The experimental data have good agreement with the analytical data within the accuracy of around 15 to 20%. The present findings can have significant inferences towards the fabrication of shear thickening fluids using nanomaterials for numerous applications such as soft armors, dampers, nanofinishing and so forth.     

Internal quality and antioxidants content of cold-stored red sweet peppers as affected by polyethylene bag packaging and hot water treatment

Physical (weight, firmness) and compositional (sugars, organic acids, ascorbic acid, phenolic compounds and carotenoids) changes of red sweet peppers (Capsicum annuum L.) were monitored during 21 days of cold storage (at 7.5 °C); fruits were stored without packaging, packaged in low density polyethylene bags, or after hot water dipping (53 °C for 4 min) and packaging. Packaging prevented water loss, and preserved the firmness of the fresh product. Sugars (fructose and glucose) content was practically constant throughout the whole storage time, for all treatments. A moderate accumulation of citric acid was observed during storage, but no marked effects of packaging and hot water dipping on citric and malic acid content. Ascorbic acid content slightly increased in unpackaged and packaged fruits, but not in treated+packaged peppers. Hydroxycinnamics total content seemed not to be affected by cold storage, packaging or hot water treatment, whereas glycosylated flavonoids showed somewhat lowered levels during storage, particularly in the case of unpackaged and packaged+treated fruits. Regarding carotenoids content, the effect of the considered storage conditions seemed to be much smaller than that due to ripening stage. Provitamin A content showed an increasing trend in unpackaged and packaged fruits; packaged+treated peppers were characterised by a lower retention of provitamin A and a higher level of capsanthin and cucurbitaxanthin A with respect to not treated fruits. On the whole, packaging and hot water treatment did not produce noticeable adverse effects on the majority of the examined compositional quality parameters.     

Fast frequency estimation and tracking using Lagrange interpolation

A computationally efficient and accurate frequency estimation and tracking algorithm is proposed, based on the adaptive frequency estimator (AFE) of Etter and Hush. A Lagrange interpolator (a fractional delay filter) is used to estimate the gradient of the performance surface of the adaptation, which enables highly accurate estimation. The performance of the new algorithm is demonstrated in the context of tracking a chirp signal in noise     

Biodegradation of gelatin–g-poly(ethyl acrylate) copolymers

Gelatin-g-poly(ethyl acrylate) copolymers were prepared in an aqueous medium, using K₂S₂O₈ initiator. The composition of the graft copolymers was dependent upon temperature and duration of the reaction. The number of grafting sites was small and molecular weight of the grafted poly(ethyl acrylate) branches was high. Three copolymer samples with grafting efficiencies of 33.3%, 61.0%, and 84.0%, were tested for their microbial susceptibility in a synthetic medium employing a mixed inoculum of Bacillus subtilis, Pseudomonas aeruginosa, and Serratia marcescens and the percent weight losses were 12%, 10.1%, and 6.0%, respectively, after 6 weeks of incubation. The extent of degradation seems to decrease with increasing grafting efficiency. There was initial rapid weight loss accompanied by the exponential increase in bacterial population and pH of the culture medium during the first week. The nitrogen analysis also showed the utilization of the polymer. A parallel set of experiments, carried out by employing the samples as the only source of both carbon and nitrogen, showed a marginal but definite increase in the utilization of the polymer.     

Development of a Sensor Fusion Strategy for Robotic Application Based on Geometric Optimization

Fusion of multi-sensor information is an important technology, which is growing exponentially due to its tremendous application potential in many areas. Effective fusion of data from sensors is very critical in increasing an intelligent system's capability to accomplish complex tasks. Appropriate fusion technologies are needed to be developed specially when a system requires redundant sensors to be used. More the redundancy in sensors, more is the computational complexity for controlling the system and more is its intelligence level. This research presents a strategy developed for multiple sensor fusion, based on geometric optimization. Each sensor's uncertainty has been modeled using classical Lagrangian optimization techniques. However, the uniqueness and effectiveness of the present technique lies on the fact that starting from the optimized value as initial estimate the accuracy of the sensory information has further been improved up to any pre defined bounded range, by developing two architectures – FFA (fission–fusion architecture) and FDD (fusion in differential domain). Sufficient evidences and analyses have been provided in the paper to show its effectiveness in various applications.     

Design of particle-reinforced polyurethane mould materials for soft tooling process using evolutionary multi-objective optimization algorithms

Polyurethane is used for making mould in soft tooling (ST) process for producing wax/plastic components. These wax components are later used as pattern in investment casting process. Due to low thermal conductivity of polyurethane, cooling time in ST process is long. To reduce the cooling time, thermal conductive fillers are incorporated into polyurethane to make composite mould material. However, addition of fillers affects various properties of the ST process, such as stiffness of the mould box, rendering flow-ability of melt mould material, etc. In the present work, multi-objective optimization of various conflicting objectives (namely maximization of equivalent thermal conductivity, minimization of effective modulus of elasticity, and minimization of equivalent viscosity) of composite material are conducted using evolutionary algorithms (EAs) in order to design particle-reinforced polyurethane composites by finding the optimal values of design parameters. The design parameters include volume fraction of filler content, size and shape factor of filler particle, etc. The Pareto-optimal front is targeted by solving the corresponding multi-objective problem using the NSGA-II procedure. Then, suitable multi-criterion decision-making techniques are employed to select one or a small set of the optimal solution(s) of design parameter(s) based on the higher level information of the ST process for industrial applications. Finally, the experimental study with a typical real industrial application demonstrates that the obtained optimal design parameters significantly reduce the cooling time in soft tooling process keeping other processing advantages.     

Proinflammatory Interleukin-33 Induces Dichotomic Effects on Cell Proliferation in Normal Gastric Epithelium and Gastric Cancer

Interleukin (IL)-33 is a member of the interleukin (IL)-1 family of cytokines linked to the development of inflammatory conditions and cancer in the gastrointestinal tract. This study is designed to investigate whether IL-33 has a direct effect on human gastric epithelial cells (GES-1), the human gastric adenocarcinoma cell line (AGS), and the gastric carcinoma cell line (NCI-N87) by assessing its role in the regulation of cell proliferation, migration, cell cycle, and apoptosis. Cell cycle regulation was also determined in ex vivo gastric cancer samples obtained during endoscopy and surgical procedures. Cell lines and tissue samples underwent stimulation with rhIL-33. Proliferation was assessed by XTT and CFSE assays, migration by wound healing assay, and apoptosis by caspase 3/7 activity assay and annexin V assay. Cell cycle was analyzed by means of propidium iodine assay, and gene expression regulation was assessed by RT-PCR profiling. We found that IL-33 has an antiproliferative and proapoptotic effect on cancer cell lines, and it can stimulate proliferation and reduce apoptosis in normal epithelial cell lines. These effects were also confirmed by the analysis of cell cycle gene expression, which showed a reduced expression of pro-proliferative genes in cancer cells, particularly in genes involved in G0/G1 and G2/M checkpoints. These results were confirmed by gene expression analysis on bioptic and surgical specimens. The aforementioned results indicate that IL-33 may be involved in cell proliferation in an environment- and cell-type-dependent manner.     

Characterisation of mortar morphology in thin sections by digital image processing

A digital imaging approach was applied to investigate mortar morphology in thin sections; in particular, the binder/aggregate ratio and the grading curve of five mortar bars were attained by digital image processing (DIP), using the Image Pro Plus 4.1 software package. The imaging procedure employed image segmentation, to extract mortar aggregate, and image filtering, to fix grain boundaries. The results show that digital image processing may be considered as an alternative method to mechanical sieving for the characterisation of mortar morphology, as it appears to be quicker and more accurate than the traditional method. However, digital image processing exhibits limits, which are discussed in the text.     

Sketching human character animations by composing sequences from large motion database

Quick creation of 3D character animations is an important task in game design, simulations, forensic animation, education, training, and more. We present a framework for creating 3D animated characters using a simple sketching interface coupled with a large, unannotated motion database that is used to find the appropriate motion sequences corresponding to the input sketches. Contrary to the previous work that deals with static sketches, our input sketches can be enhanced by motion and rotation curves that improve matching in the context of the existing animation sequences. Our framework uses animated sequences as the basic building blocks of the final animated scenes, and allows for various operations with them such as trimming, resampling, or connecting by use of blending and interpolation. A database of significant and unique poses, together with a two-pass search running on the GPU, allows for interactive matching even for large amounts of poses in a template database. The system provides intuitive interfaces, an immediate feedback, and poses very small requirements on the user. A user study showed that the system can be used by novice users with no animation experience or artistic talent, as well as by users with an animation background. Both groups were able to create animated scenes consisting of complex and varied actions in less than 20 minutes.