Accelerated multi-contrast high isotropic resolution 3D intracranial vessel wall MRI using a tailored k-space undersampling and partially parallel reconstruction strategy

Objective

To develop a 3D multi-contrast IVW protocol with 0.5-mm isotropic resolution and a scan time of 5 min per sequence.

Materials and methods

Pre-contrast T1w VISTA, DANTE prepared PDw VISTA, SNAP, and post-contrast T1w VISTA were accelerated using cartesian undersampling with target ordering method (CUSTOM) and self-supporting tailored k-space estimation for parallel imaging reconstruction (STEP). CUSTOM + STEP IVW was compared to full-sample IVW, SENSE-accelerated IVW, and CUSTOM + zero-filled Fourier reconstruction in normal volunteers and subjects with intracranial atherosclerotic disease (ICAD). Image quality, vessel delineation, CSF suppression, and blood suppression were compared.

Results

CUSTOM + STEP vessel wall delineation was comparable to full-sample IVW and better than SENSE IVW for vessel wall delineation on T1w VISTA and luminal contrast on SNAP. Average image quality and wall depiction were significantly improved using STEP reconstruction compared with zero-filled Fourier reconstruction, with no significant difference in CSF or blood suppression.

Conclusions

CUSTOM + STEP allowed multi-contrast 3D 0.5-mm isotropic IVW within 30 min. Although some quantitative and qualitative scores for CUSTOM − STEP were lower than fully sampled IVW, CUSTOM + STEP provided comparable vessel wall delineation as full-sample IVW and was superior to SENSE. CUSTOM + STEP IVW was well tolerated by patients and showed good delineation of ICAD plaque.

     

Spatial memory deficits following stimulation of hippocampal 5-HT1B receptors in the rat

The authors review the principles of reconstructive surgery for lower limb salvage after severe lower limb trauma to determine factors that have been used as decision-making criteria for limb salvage or amputation in severe lower extremity injuries and the methods of reconstruction and their outcome. The use of scoring systems and their value in acute decision making (primary amputation or limb salvage) are described. Soft-tissue reconstructive techniques, with emphasis on the use of flaps and the importance of selecting the best technique and time for the reconstruction are reviewed. Skeletal reconstructive techniques are described, including available options and currently held views on indications and use of the best contemporary methods. It is essential for the physician to make a good initial decision on the need for primary amputation or limb salvage. A multidisciplinary approach is fundamental to successful salvage.     

Improved genetic algorithm for channel allocation with channel borrowing in mobile computing

This paper exploits the potential of the Genetic Algorithm to solve the cellular resource allocation problem. When a blocked host is to be allocated to a borrowable channel, a crucial decision is which neighboring cell to choose to borrow a channel. It is an optimization problem and the genetic algorithm is efficiently applied to handle this. The Genetic Algorithm, for this particular problem, is improved by introducing a new genetic operator, named pluck, that incorporates a problem-specific knowledge in population generation and leads to a better channel utilization by reducing the average blocked hosts. The pluck operator makes the crucial decision of when and which cell to borrow with the future consideration that the borrowing should not lead the network to chaos. It makes a channel borrowing decision that minimizes the number of blocked hosts and improves the long-term performance of the network. Efficacy of the proposed method has been evaluated by experimentation.     

Interaction of nonylphenol and hepatic CYP1A in rats

Both estradiol and nonylphenol (NP) inhibited hepatic microsomal 7-ethoxyresorufin O-deethylase (EROD) activity of beta-naphthoflavone-treated rats. Enzyme kinetic analyses (Lineweaver-Burk plots) using different estradiol and NP concentrations with graded increases in the concentrations of the substrate, ethoxyresorufin, showed that the inhibition was of a competitive nature at all concentrations of estradiol or NP used. Thus, the mechanism by which NP inhibits EROD activity is similar to that of estradiol. NP, however, was much less potent than estradiol. Young rats treated in vivo with 80 mg/kg body weight of NP demonstrated a slight but significant decrease in their hepatic microsomal EROD activity and CYP1A protein as measured by western blot analysis. In addition, treatment with NP led to a decrease in the steady-state levels of hepatic CYP1A mRNA in rats, suggesting that NP acted at the pre-translational level. The competitive nature of inhibition by NP on hepatic microsomal EROD activity indirectly suggests that this compound is a possible substrate of the CYP1A enzyme. Furthermore, NP had a moderate modulating effect on the expression of CYP1A in rat liver.     

First-principles investigation of F-functionalized ZGNR/AGNR for nanoscale interconnect applications

Journal of Computational Electronics - Zigzag and armchair graphene nanoribbons (ZGNR and AGNR) have been investigated using the density functional theory (DFT) and nonequilibrium Green’s...     

OXYGEN TRANSFER IN HORIZONTAL PIPELINE AERATORS WITH NOZZLES

Horizontal pipeline and tubular loop aerators are of interest for fermentation and waste water treatment and are ideally suited for continuous processing. A major drawback is that these pipeline contactors invariably operate in the “elongated bubble and plug” regime in which the mass transfer rate is low. This article evaluates the performance of a horizontal pipeline aerator fitted with nozzles equispaced along its length to enhance mass transfer rates by promoting turbulence and augmenting effective interfacial area. Such devices can also be advantageously used in long pipe lines as in the case of treating waste while it is being transported. Pressure drop and overall liquid-side mass transfer coefficient data are reported as functions of liquid (water) and gas flow rates and nozzle size and spacing. It is shown that for all the conditions studied, k_La = 0.026(ΔP/L)^1.036 and that the pressure gradient is given by a simple correlation, provided an empirical parameter which characterises a nozzle is known. Preliminary investigations on the effect of surfactant ad the presence of suspended solids (size 75 μm) on mass transfer coefficient are also reported. Very high values of power dissipation can be achieved in such aerators without mechanically moving parts and high values of mass transfer coefficient can be realized.     

A computational approach to characterize formation of a passivation layer in lithium metal anodes

Li metal anode is the “Holy Grail” material of advanced Lithium-ion-batteries (LIBs). However, it is plagued by uncontrollable dendrite growth resulting in poor cycling efficiency and short-circuiting of batteries. This has spurred a plethora of research to understand the underlying mechanism of dendrite formation. While experimental studies suggest that there are complex physical and chemical interactions between heterogeneous solid-electrolyte interphase (SEI) and dendrite growth, most of the studies do not reveal the mechanisms triggering these interactions. To deal with this knowledge gap, we propose a multiscale modeling framework which couples kinetic Monte Carlo and Molecular Dynamics simulations. Specifically, the model has been developed to account for (a) heterogeneous SEI, (b) dendrite-SEI interactions, and (c) effect of electrolyte on Li electrodeposition and potential dendrite formation. This allows the proposed computational model to be extended to various electrolytes and SEI species and generate results consistent with previous experimental studies.     

Interpenetrating polymer network/functionalized-reduced graphene oxide nanocomposite: As an advanced functional material

In this report, smart polyurethane-polystyrene interpenetrating polymer network (IPN)-based nanocomposites were fabricated using simultaneous polymerization technique with different doses of functionalized reduced graphene oxide (f-RGO). RGO was functionalized with monoglyceride of sunflower oil in the presence of toluene diisocyanate. Successful functionalization of RGO was supported by Fourier-transform infrared spectroscopy, X-Ray diffraction, and transmission electron microscopy analyses. Most interestingly, the fabricated IPN-based nanocomposites showed significant enhancements in mechanical (tensile strength: 165%; elongation at break: 198%; toughness: 340%) and thermal (thermally stable up to 262°C) properties upon incorporation of 1 weight% of f-RGO. Moreover, the fabricated nanocomposites exhibited outstanding chemical resistance, self-cleaning behavior through surface hydrophobicity (static contact angle: 125.6–136.5°), multi-stimuli responsive shape memory effect (100% recovery within 33–44 s by microwave and 265–308 s by sunlight) and thermally actuated artificial muscle-like behavior. Therefore, the studied smart nanocomposites with the aforementioned properties hold significant potential for possible advanced applications.     

Enhancement of electromechanical properties of natural rubber by adding barium titanate filler: An electro-mechanical study

Natural rubber is one of the most potential electro-active polymers for sensors, actuators, and energy harvesting applications. Enhancing the characteristic properties of polymers by reinforcing with fillers that possess multifunctional attributes have attracted considerable attention. In the present study, barium titanate reinforced natural rubber composite is prepared by using two-roll mill mixing. Afterwards, mechanical, electrical, and electromechanical properties of the composites are extensively analyzed by reinforcing different amounts of barium titanate into the matrix of natural rubber. The fabricated dielectric composite shows excellent properties such as high dielectric constant, low dielectric losses, high dielectric breakdown strength, and extreme stretchability. It is observed that as the filler loading reaches the value of 11 parts per hundred rubber (phr), maximum agglomeration of the particles occurs. Maximum stretchability and highest ratio of dielectric constant to elastic modulus are obtained at 8 phr of barium titanate fillers and at the loading, a maximum actuation strain of 11.24% is achieved. This study provides a simple, economical, and effective method for preparing enhanced mechanical, electrical, and electromechanical properties of natural rubber composites, facilitating the wide applications of dielectric materials as actuators and generators.     

Reliable before-fabrication forecasting of MEMS piezoresistive pressure sensor: mathematical modelling and numerical simulation

Microsystem Technologies - Micro-mechanical systems (MEMS) based piezoresistive pressure sensors have significant importance in several pressure sensor devices in real world, i.e., aviation, IoT...