Preparation of pyrochlores. A1−xHxTaO3·nH2O (A=Na,K)

Pyrochlores of A_1?xH_xTaO₃·nH₂O (A=Na,K) were prepared under the hydrothermal conditions. The values of x for these compounds were increased from 0.3 to 0.5 for A=Na and from 0.2 to 0.5 for A=K by treatment with the distilled water. The compounds with x<0.5 were decomposed to a mixture of NaTaO₃ and Na₂Ta₄O₁₁ for A=Na, or to a mixture of KTaO₃ and a tetragonal tungsten bronze phase, and those with x=0.5 to a single phase of A₂Ta₄O₁₁ at elevated temperatures. Below the decomposition temperatures, defect pyrochlores with oxygen vacancies, $\text{A}{}_{\mathrm{<mtext>1?</mtext><mtext>x</mtext>}}\text{TaO}{}_{\mathrm{<mtext>3?</mtext><mtext>x</mtext><mtext>2</mtext>}}$, were produced. They were hygroscopic, and in the case of A=K and x=0.5 the original phase was recovered by leaving in air for several hours.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

Ion exchange of intercalation compounds from WOP2O7 and intercalation ofn-alkylamines

Ion exchange of Na _x WOP₂O₇ ·nH₂O (x 1.4) prepared from WOP₂O₇ was attempted, using alkaline and alkaline earth ions. The degree of exchange was observed to be >50% at 90° C except for Mg²⁺. The basal spacing of ion-exchanged materials for the hydrated phase were dependent on the number of water molecules in the interlayer spaces, while those for the dehydrated phase increased with the size of ions in the interlayer spaces. The network of water molecules linked by the hydrogen bond in the interlayer spaces seems to determine the basal spacing. By the ion-exchange reaction,n-alkylammonium ions were intercalated into the interlayer spaces of Na _x WOP₂O₇ ·nH₂O (x 1.4) and Sn _x H _y WOP₂O₇ ·nH₂O (2x +y 0.5). In spite of the difference in the charge density of the host layer, a similar arrangement of alkyl chains in the interlayer spaces resulted, and neutral amines were considered to be intercalated as well as ammonium ions. Direct reaction ofn-alkylamine with WOP₂O₇ produced an intercalation compound without reduction of tungsten. The arrangement of the amines in the interlayer spaces is similar to that supposed to the ion-exchanged derivatives when heated at 140° Cin vacuo.     

New catalytic functions of Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys in the conversions of methanol

Pd and Pt supported on ZnO, Ga₂O₃ and In₂O₃ exhibit high catalytic performance for the steam reforming of methanol, CH₃OH+H₂OCO₂+3HH₂, and the dehydrogenation of methanol to HCOOCH₃, 2CH₃OHHCOOCH₃+2HH₂. Combined results with temperature-programmed reduction (TPR) and XRD method revealed that Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys were produced upon reduction. Over the catalysts having the alloy phase, the reactions proceeded selectively, whereas the catalysts having metallic phase exhibited poor selectivities.     

Abnormal metabolism of polyunsaturated fatty acids and phospholipids in diabetic glomeruli

Studies were done on changes in phospholipid content and fatty acid composition of phospholipids and on the role of the acylation pathway in synthesis of phospholipids in the development of abnormal fatty acid composition in the glomeruli of rats 2 and 10 mo after induction of diabetes with streptozotocin. The proportions of individual phospholipids in the glomeruli of rats were not changed 2 mo after induction of diabetes, but the proportion of phosphatidylethanolamine (PE) decreased and that of sphingomyelin increased 10 mo after induction of diabetes. In contrast, in liver the proportion of PE was increased and that of phosphatidylcholine was decreased. These results showed that changes of individual phospholipids in glomeruli were time-dependent and tissue-specific. Two mo after induction of diabetes, the main change in the phospholipid fatty acid composition of diabetic glomeruli was a decrease in arachidonic acid (AA); the main change in serum free fatty acids (FFA) was an increase in linoleic acid (LA) and a decrease in AA. Ten mo after induction of diabetes, the main changes in the phospholipid fatty acid composition of glomeruli were an increase in LA and a decrease in AA; the main change of the serum FFA composition was a decrease in AA. Thus, the fatty acid composition of glomerular phospholipids was not directly correlated to that of the serum in diabetic rats. Acyl-CoA synthetase and acyltransferase activities increased in diabetic glomeruli with either AA or LA as substrate, but activity toward LA increased more at 2 mo after induction of diabetes. Acyl-CoA synthetase activity increased in diabetic glomeruli with LA as substrate, but that did not change with AA as substrate at 10 mo after induction of diabetes. Furthermore, acyltransferase activity decreased in diabetic glomeruli with AA as substrate, although that did not change with LA as substrate at 10 mo after induction of diabetes.     

Upper and lower critical solution temperatures in poly (ethylene glycol) solutions

Upper and lower critical solution temperatures have been determined for solutions of poly(ethylene glycol) in t-butyl acetate and water over the molecular weight range of M_η = 2.18 × 10³ to ～1020 × 10³. The phase diagram for solutions of poly(ethylene glycol) (M_η = 719 × 10³) in t-butyl acetate was expressed as the ‘hour glass’ type, while the phase diagram for solution of poly(ethylene glycol) (M_η = 2.18 × 10³ to ～2.29 × 10³) in water was expressed as the ‘closed loop’ type. The value of the pressure dependence of the lower critical solution temperature $\text{(}\text{d}\text{T}\text{d}\text{P}\text{)}{}_{\mathrm{c}}$ in the poly(ethylene glycol) (M_η = 1020 × 10³)/water system over the pressure range of 0 to ～50 atm was negligibly small and positive.     

Changes in the Peeled Surfaces of Copper Thin Films Deposited on Polyimide Substrates After Heat Treatment

Peel strength between a copper (Cu) thin film and a polyimide (pyromellitic dianhydride-oxydianiline, or PMDA-ODA) substrate is reduced by heat treatment at 150°C in air. In this work, we investigated the peel strength, the morphology of the interface between Cu films and polyimide substrates using optical microscopy and electron microscopy, and chemical change of the interface using Auger electron spectroscopy (AES) and micro X-ray photoelectron spectroscopy (XPS). The analysis showed that CuO “lumps” were present on the peeled surface of PMDA-ODA after heat treatment at 150°C in air. The peeled surfaces of other polyimide substrates were also analyzed: biphenyl dianhydride-para phenylene diamine (BPDA-PDA) and biphenyl dianhydride-oxydianiline (BPDA-ODA). CuO lumps were present on the peeled surface of BPDA-ODA after the heat treatment, but not that of BPDA-PDA. Compared with the adhesion strength for the Cu thin film, the adhesion strength was high for the Cu/PMDA-ODA and Cu/BPDA-ODA laminates, but the adhesion strength was very low for the Cu/BPDA-PDA laminate. This low strength is the reason that CuO lumps were not detected on the peeled surface of the BPDA-PDA substrate. These CuO lumps were related to the adhesion degradation of the Cu/polyimide laminates after the heat treatment.     

Evaluation of thermal spike due to exothermic reaction in curing process of carbon fiber-reinforced plastic pressure accumulators for hydrogen stations

In the curing process of fiber-reinforced plastic accumulators, a thermal spike appears due to the exothermic reaction of the resin. It is necessary to accurately evaluate this thermal spike to guarantee quality and avoid using a trial and error approach to control the temperature. Thus, we developed a curing process simulator that is able to accurately evaluate the thermal spike of the thermosetting resin. A simplified mesoscale finite element model with the definite separation of fiber and resin is used in the simulation. In this study, the newly developed simulation system was examined by comparing its results with the experimental results from the curing process of fiber-reinforced plastic accumulators.