10-Gb/s error-free transmission under optical reflection using isolator-free 1.3- /spl mu/m InP-based vertical-cavity surface-emitting lasers

Error-free transmission through 10-km single-mode fiber at 10 Gb/s under -13-dB optical reflections has been demonstrated for the first time using a directly modulated 1.3-/spl mu/m InP-based VCSEL without any optical isolator. The 13-GHz relaxation oscillation frequency and stable polarization suppresses relative intensity noise degradation under optical reflection. Only 1-dB error-free power penalty has been observed with optical reflection set with the worst polarization direction.     

Passivation effects of deuterium exposure on boron-doped CVD homoepitaxial diamond

The deuterium (hydrogen) passivation effect on acceptors in boron-doped CVD homoepitaxial diamond was studied by electrical (Hall-effect) and secondary ion mass spectroscopy (SIMS) measurements. Deuterium was incorporated into the samples using microwave (MW) deuterium plasma at 673 K for 2–24 h. We observed the progress of acceptor passivation with p-type conduction, which finally resulted in a highly resistive state.     

Mechanical properties of sinter-forged Al2O3-ZrO2 ceramics

Two kinds of composites, Al₂O₃-25 wt% ZrO₂(2 mol% Y₂O₃) (Y-ZTA), Al₂O₃-25 wt% ZrO₂(8 mol% CeO₂) (Ce-ZTA) were produced by the sinter-forging process. The effect of presintering temperature on the mechanical properties of the composites was examined. The sinter-forging process increased the room-temperature bending strength in comparison with pressureless sintering, owing to the smaller grain size in sinter-forged bodies than in pressureless sintered ones. It was found necessary to keep the presintering temperature considerably lower than sinter-forging temperature in order to improve the room-temperature strength. The strength of sinter-forged Ce-ZTA was higher than that of sinter-forged Y-ZTA. The residual surface compressive stress induced by the phase transition during grinding in Ce-ZTA was found to be effective to further improve the strength and fracture toughness.     

Analysis of the IgE-epitope of Der f 2, a major mite allergen, by in vitro mutagenesis

Der f 2 is a major mite allergen composed of 129 amino acid residues. To determine the major epitopes on Der f 2 recognized by human IgE antibodies, artificial mutations were introduced to Der f 2 protein. The IgE-binding activity of Der f 2 was significantly decreased by deletion of 10 amino acids at the N-terminus or nine amino acids at the C-terminus. Site-directed mutagenesis with a single amino acid replacement by Ala or Leu in both N- and C-terminal regions as well as a central portion was performed to generate 42 single-site mutations. Amino acid replacement around a disulfide bond of Cys8-Cys119 caused a marked decrease in IgE-binding activity. Furthermore, a distinct decrease in IgE-binding was also caused by Ala-substitution close to a disulfide bond of Cys73-Cys78 and by mutations of a few charged residues. From these results, it was concluded that the two disulfide-forming regions of Der f 2 and several charged residues are important for forming major epitope structures recognized by human IgE antibodies.     

A comparison of the grade of laryngeal visualisation;--the McCoy compared with the Macintosh and the Miller blade in adults

Effectiveness in visualization of the vocal cord during orotracheal intubation with McCoy (McC) compared with Macintosh (Min) and Miller (Mil) blades were investigated. After an institutional review board approval, 117 patients for elective surgery under general anesthesia requiring tracheal intubation were investigated. Five board certified anesthesiologists tried to visualize the vocal cord of a patient three times with the three different types of laryngoscope. Total of 351 intubation attempts were studied. The view obtained at laryngoscopy with each of the three blades was recorded as follows. Grade 1. If most of the glottis is visible. Grade 2. If only the posterior extremity of the glottis is visible. Grade 3. If no part of the glottis can be seen. Grade 4. If not even the epiglottis can be exposed. Eight-two Grade 1 views were obtained with McC, 72 with Mil and 47 with Min, respectively. Thirty-three Grade 2 views were obtained with McC, 36 with Min and 24 with Mil. Two Grade 3 views with McC, 34 with Min and 14 with Mil were obtained. Seven Grade 4 views were obtained with Mil. The grades of laryngeal visualization with McC were significantly lower than those with Min and Mil.     

Deposition of carbon and its hydrogenation catalyzed by nickel

Formation of carbon on nickel sheet from benzene vapor carried by hydrogen was studied at a temperature range from 520 to 730°C. A maximum rate was observed at about 630°C, above which the deposition rate decreased rapidly. The carbon formed was hydrogenated in situ. Methane was the main gaseous product and a maximum rate was observed at about 670°C. Very high reactivity of deposited carbon toward hydrogenation was ascribed to the catalytic action of nickel particles dispersed in the carbon. The hydrogenation rates were divided into three zones and possible interpretations are discussed. A mechanism which is a reverse process to deposition was suggested. The decrease of the hydrogenation rate at higher temperatures was due to the equilibrium among carbon, hydrogen and methane, where carbon was more reactive than graphite.     

Semi-1 thermoplastic interpenetrating polymer networks of physically crosslinked poly(n-butyl acrylate) and polystyrene

Poly(n-butyl acrylate) (PnBA) chemically crosslinked with tetraethylene glycol dimethacrylate (TEGDM) and physically crosslinked PnBAs produced by neutralization of poly(n-butyl acrylate-stat-acrylic acid) with NaOH or Ca(OH)₂ were prepared as a polymer I network. Each polymer I was swollen with styrene and cured in situ into semi-IPN-TEGDM, semi-IPN-Na, or semi-IPN-Ca, respectively. Both physically crosslinked polymers maintained their shapes during the swelling procedure. Dynamic mechanical spectroscopy indicated that good mixing of the two polymers took place in the semi-IPN-Ca as well as in semi-IPN-TEGDM, but a distinct phase separation occurred in the semi-IPN-Na. These results were supported by their transparent or optical opaque appearances, respectively. Annealing at 180°C developed further phase separation in the semi-IPN-Na, but very little in the semi-IPN-Ca. Analyses by the incompatibility number (based on the modulus–temperature curve) and the calculation of individual phase compositions (from the glass transition temperature shifts) were used in estimating the extent of molecular mixing.     

Microporous carbons prepared from cationic surfactant-resorcinol/formaldehyde composites

Microporous carbons have been synthesized by the carbonization of cationic surfactant-resorcinol/formaldehyde (RF) composites, which were themselves formed by electrostatic organic-organic interaction. The porous structure produced by the decomposition of the surfactant plays an important role for the gasification of the RF polymer at higher temperatures. The pore size of the carbon prepared from tetrapropylammonium bromide (TPAB)-RF, cetyltrimethylammonium bromide (C₁₆TAB)-RF and decyltrimethylammonium bromide (C₁₀TAB)-RF mixtures can be estimated as 0.53 nm from the Horvath-Kawazoe method using N₂ adsorption isotherms. Their pore size distributions were very narrow, showing that the microporous carbons derived from surfactant-RF mixture may have promise as adsorbents and membrane materials.     

Magnetic order and evolution of the electronic state aroundx=0.12 in La2?xBaxCuO4 and La2?xSrxCuO4

Muon spin rotation ( ⁺SR) measurement provides clear evidence of the antiferromagnetic order of Cu moments below 35 K for La_2–x Ba _x CuO₄ and below 15 K for La_2–x Sr _x CuO₄ in the narrow range ofx where the high-T _c superconductivity (SC) is suppressed remarkably. The results suggest that the change of the electronic state coupled with the lattice instability is relevant to the local suppression of SC and freezing of spin fluctuations of the Cu moment.