Stability of the antimicrobial activity of acetogenins from avocado seed,under common food processing conditions,against Clostridium sporogenes vegetative cell growth and endospore germination

Anticlostridial activity of acetogenins from avocado seed was further characterised, and their stability and effectiveness under food processing conditions, and in a model food system, studied for the first time. Isolated AcO‐avocadenyne (1) and AcO‐avocadene (2) showed anticlostridial potential, particularly the latter molecule. Enriched acetogenins extracts, obtained at laboratory scale (EAE) and semi‐commercially (Avosafe^®), presented similar MIC values (3.9–9.8 ppm) and a bacteriostatic effect. Extracts bioactivity showed resistance to heat (≤120 °C), high hydrostatic pressure (HHP; 300–600 MPa, 3–6 min, 25 °C) and salt (≤3% w/v). In addition, the extract was most stable at pH ≥ 7.0 and potency against endospores increased after HHP treatment and exposure to pH 9.5, suggesting a positive effect on solubility or structure of particular acetogenins. In a model food system processed by HHP, acetogenins were retained; however, initial quantities gradually declined by 63% and 32% at 25 and 4 °C, respectively, at the end of the storage period (42 days). Most stable molecules (persediene (4) > persenones > AcO‐avocadene (2)) possess a keto or trans‐enone group at C‐4 in the aliphatic chain, which could support hydrogen donation to surrounding carbon atoms and confer antioxidant activity. Active endospores were completely inhibited by 5000 ppm Avosafe^® in the model food system (37 °C, 72 h) and lower concentrations (500–1000 ppm) resulted in 1–2 log reduction of a 3 log inoculum target. Efficacy information generated in the present work is considered crucial to improve scientific knowledge on spore inhibition properties of avocado acetogenins.     

Gray-level computer-generated hologram filters for multiple-object correlation

Synthesis of gray-level computer-generated holograms allows for an increase of the information storage capability that is usually achieved with conventional binary filters. This is mainly because more degrees of freedom are available. We propose to profit from this feature by synthesizing complex filters formed by many superimposed holograms, each with a different carrier frequency. We apply these gray-level filters to perform multichannel correlation and in this way enhance the capability of optical correlators to process the information in parallel and simultaneously. First, we analyze the behavior of some performance criteria on the impulse response and on the correlation as a function of the number of holograms that are multiplexed. Then we show the results of two experiments: In the first a composed phase-only filter is used in a multiple-object recognition process. In the second a composed synthetic discriminant function filter is used to implement an object classification by means of a binary code.     

Reliability of diagnostic tests for contact allergy to mydriatic eyedrops

AIM: To perform a clinical trial of selegiline in 25 patients with chronic fatigue syndrome (CFS) where patients were told they would receive placebo or active agent at different times during the 6-week trial. We chose selegiline, a specific monoamine oxidase (MAO) B receptor inhibitor, because a prior trial of lowdose phenelzine, a nonspecific MAO inhibitor, showed a small but significant therapeutic effect. METHODS: Questionnaires comprised of 19 tests of mood, fatigue, functional status and symptom severity were collected at the start and end of the trial as well as 2 weeks after its start. The trial was done in three 2-week blocks: in the first, 2 placebo pills were given per day; in the next, one 5-mg tablet of agent and one placebo were given per day, and in the last, a 5-mg tablet of agent was given twice a day. The plan was to compare the changes in the 19 tests during the placebo phase to those found in the active treatment phase in 19 patients completing the trial. FINDINGS: Significant improvement in 3 variables-tension/anxiety, vigor and sexual relations-was found. A significant pattern of improvement compared to worsening was found for the 19 self-report vehicles during active treatment as compared with placebo treatment. Evidence for an antidepressant effect of the drug was not found. CONCLUSIONS: Selegiline has a small but significant therapeutic effect in CFS which appears independent of an antidepressant effect.     

Optical and structural properties of ZnO + Zn<Subscript>2</Subscript>TiO<Subscript>4</Subscript> thin films prepared by the sol–gel method

ZnO + Zn₂TiO₄ thin films were obtained by the sol–gel method using precursor solutions with different Ti/Zn ratios in the 0.18–2.13 range. The films were deposited on glass substrates and annealed in an open atmosphere at 550 °C. The oxide was characterized by X-ray diffraction and photoacoustic (PA) spectroscopy. The films were constituted of polycrystalline ZnO for the lowest Ti/Zn ratio (0.18), polycrystalline Zn₂TiO₄ for the 0.70 and 1.0 ratios, and mixes of both oxides for the intermediate ratios (0.32 and 0.50). For the highest ratios studied (1.44 and 2.13), the films were amorphous. The energy band gap (E_g) values were determined from optical absorption spectra, measured by means of the PA technique spectra. E_g varied in the 3.15 eV (ZnO) to 3.70 eV (Zn₂TiO₄) range.     

Mapping and monitoring riparian vegetation distribution,structure and composition with regression tree models and post-classification change metrics

Riparian systems have become increasingly susceptible to both natural and human disturbances as cumulative pressures from changing land use and climate alter the hydrological regimes. This article introduces a landscape dynamics monitoring protocol that incorporates riparian structural classes into the land-cover classification scheme and examines riparian change within the context of surrounding land-cover change. We tested whether Landsat Thematic Mapper (TM) imagery could be used to document a riparian tree die-off through the classification of multi-date Landsat images using classification and regression tree (CART) models trained with physiognomic vegetation data. We developed a post-classification change map and used patch metrics to examine the magnitude and trajectories of riparian class change relative to mapped disturbance parameters. Results show that catchments where riparian change occurred can be identified from land-cover change maps; however, the main change resulting from the die-off disturbance was compositional rather than structural, making accurate post-classification change detection difficult.     

CO/sub 2/ laser processing of alumina (Al/sub 2/O/sub 3/) printed circuit board substrates

We report the results of an investigation of the laser-material interaction processes involved in laser drilling of alumina, through the use of an enhanced peak power (2.5 kW) CO/sub 2/ laser and novel temporal pulse formats. Peak power was varied from 30 W to 2 kW for pulses of constant energy to observe the effect produced on scribe depth. High-speed videography of hole formation has been combined with microscopic analysis to investigate the key processes involved in laser processing of alumina. Plasma screening was observed for short, high peak power laser pulses, and optimal scribing was achieved in the weakly plasma absorbing regime. A new processing technique for scribing alumina has been developed, which exploits the fast response of the laser to produce novel temporal pulse shapes, which can be modified to generate cleaner holes. Scribe speeds of up to 280 mm/spl middot/s/sup -1/ were obtained for scribe holes >200 /spl mu/m deep and 150 /spl mu/m apart, with no material plugging the hole, in 0.635-mm-thick 96% alumina.     

The effect of citrate esters as plasticizers on the thermal and mechanical properties of poly(methyl methacrylate)

Plasticizers play a key role in the formulation of polymers and in determining their physical properties and processability. This study examines the effects of citrate esters, triethylcitrate, and triacetine as plasticizers on the thermal and mechanical properties of poly(methyl methacrylate). The samples were characterized by differential scanning calorimetry, dynamical mechanical analysis, and mechanical testing under different plasticizer contents. Both citrate esters proved to be effective as plasticizers, DSC data for the triacetine additive fits with Fox equation. Microstructure and relaxation properties were studied by dynamic mechanical analysis where loss modulus shows clearly that absorbed plasticizer shifts the α‐transition to lower temperature and β‐relaxations associated to ester side groups are unchanged even up to 30 wt % plasticizer. Mechanical properties were evaluated with an Instron testing machine. Both additives produced (1) an initial plasticization, with a decrease in tensile strength and modulus; (2) an antiplasticization, reflected as an increase in tensile strength; and modulus and (3) a final plasticization, with a notable decrease in tensile strength and modulus and an increase in elongation where a 35 wt % of triethylcitrate added to the poly(methyl methacrylate) increased in 200% its elongation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Comparing different methods to fix and to dehydrate cells on alginate hydrogel scaffolds using scanning electron microscopy

Scanning electron microscopy (SEM) is commonly used in the analysis of scaffolds morphology, as well as cell attachment, morphology and spreading on to the scaffolds. However, so far a specific methodology to prepare the alginate hydrogel (AH) scaffolds for SEM analysis has not been evaluated. This study compared different methods to fix/dehydrate cells in AH scaffolds for SEM analysis. AH scaffolds were prepared and seeded with NIH/3T3 cell line; fixed with glutaraldehyde, osmium tetroxide, or the freeze drying method and analyzed by SEM. Results demonstrated that the freeze dried method interferes less with cell morphology and density, and preserves the scaffolds structure. The fixation with glutaraldehyde did not affect cells morphology and density; however, the scaffolds morphology was affected in some level. The fixation with osmium tetroxide interfered in the natural structure of cells and scaffold. In conclusion the freeze drying and glutaraldehyde are suitable methods for cell fixation in AH scaffold for SEM, although scaffolds structure seems to be affected by glutaraldehyde. Microsc. Res. Tech. 78:553–561, 2015. © 2015 Wiley Periodicals, Inc.     

Photocatalytic oxidation on nanostructured chalcogenide modified titanium dioxide

Surface mesoscopic titanium dioxide (P25) films deposited onto conducting glass plates (SnO₂:F) were modified by colloidal Ru_xSe_y nanoparticles (2 nm diameter). A decrease of the photocurrent was found upon modification of TiO₂ films. However, interfacial electron transfer kinetics to oxygen was favored. The increase of the catalyst surface concentration onto TiO₂, shifts the onset of the photocurrent under UV-illumination, to 0.6 V/RHE in presence of oxygen dissolved in the electrolyte. Concomitant to this, the cathodic current becomes important and shifts to more positive potentials. This phenomenon allows the system to work catalytically under open circuit conditions. On non-modified TiO₂, the application of a 0.3 V/RHE potential leads to an enhancement of the photooxidation of formic acid. Photocurrent images revealed a non-homogeneous distribution of the catalyst on the titanium dioxide films.     

Structure and bonding of ArClF: Intermolecular potential surface

The ground-state potential surface of the Ar-ClF complex is determined by restricted coupled-cluster with single and double excitations and a noniterative perturbation treatment of triple excitation (RCCSD(T)) calculations, using augmented correlation consistent basis sets supplemented with an additional set of midbond functions. Three local minima are found for the Ar-ClF, which correspond to linear Ar-Cl-F and Ar-F-Cl configurations and a near T-shaped structure. The well depths and the equilibrium distances are 283.62 cm⁻¹ at 3.84 Å and 128.96 cm⁻¹ at 4.31 Å for the linear ones and 173.13 cm⁻¹ at 3.58 Å for the one at θ = 107.5°. Bound-state calculations are carried out and the linear Ar-Cl-F structure is found to be the most stable one, in accordance with the experiment. Dissociation energies, intermolecular distances, and vibrational frequencies are computed and compared with available experimental data.