Vortex imaging in superconducting films by scanning hall probe microscopy

We have used a low noise Scanning Hall Probe Microscope (SHPM) to study vortex structures in superconducting films. The microscope has high magnetic field (2.9×10^–8T/Hz at 77K) and spatial resolution, 0.85m. Magnetic field profiles of single vortices in High T_c YBa₂Cu₃O_7– thin films have been successfully measured and the microscopic penetration depth of the superconductor has been extracted as a function of temperature. Flux penetration into the superconductor has been imaged in real time (8s/frame).     

Solubility Enhancement of Fe in ZnO Nanoparticles Prepared by Co-Precipitation Method

Journal of Superconductivity and Novel Magnetism - Crystalline ZnO offers an excellent host matrix to create a dilute magnetic semiconductor (DMS) owing to its facile Zn-atom substitution with the...     

Comparison of the effects of different retention appliances on the oxidant–antioxidant system

The aim was to compare oxidative stress (OS) levels with different types of retention appliance. Thirty orthodontic patients were divided into three groups: Group 1 (Essix retainer), Group 2 (lingual retainer with stainless steel retainer wire), and Group 3 (lingual retainer with fiber-reinforced material). OS was assessed in the subjects’ saliva. Saliva samples were taken from the patients at T₀ (before using the retention appliance), T₁ (first month of retention), and T₂ (third month of retention). The specimens were investigated to detect changes in total antioxidant status (TAS), total oxidant status (TOS), and oxidative stress index (OSI). TAS values in Group 2 were significantly higher than in Group 3. TOS values in Group 3 were significantly lower than in the other groups. TOS values in Group 2 were lower than in Group 1. OSI values of Group 1 were higher than those in Group 2 or 3. There was no statistically significant difference among the time periods. The type of retention appliance affected OS values. A fiber-reinforced material may have a lower OSI. OS or products can affect some systemic disease; therefore, the selection of the retainer will be important on these patients.     

Effect of gas permeation temperature and annealing procedure on the performance of binary and ternary mixed matrix membranes of polyethersulfone,SAPO‐34, and 2‐hydroxy 5‐methyl aniline

This study investigated the effect of annealing time and temperature on gas separation performance of mixed matrix membranes (MMMs) prepared from polyethersulfone (PES), SAPO‐34, and 2‐hydroxy 5‐methyl aniline (HMA). A postannealing period at 120°C for a week extensively increased the reproducibility and stability of MMMs, but for pure PES membranes no post‐annealing was necessary for stable and reproducible performance. The effect of operation temperature was also investigated. The permeabilities of H₂, CO₂, and CH₄ increased with increasing permeation temperature from 35°C to 120°C, yet CO₂/CH₄ and H₂/CH₄ selectivities decreased. PES/SAPO‐34/HMA ternary and PES/SAPO‐34 binary MMMs exhibited the highest ideal selectivity and permeability values at all temperatures, respectively. For H₂/CO₂ pair, when temperature increased from 35°C to 120°C, selectivity increased from 3.2 to 4.6 and H₂ permeability increased from 8 to 26.5 Barrer for ternary MMM, demonstrating the advantage of using this membrane at high temperatures. The activation energies were in the order of CH₄ > H₂ > CO₂ for all membranes. PES/SAPO‐34/HMA membrane had activation energies higher than that of PES/SAPO‐34 membrane, suggesting that HMA acts as a compatibilizer between the two phases. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40679.     

Predicting construction crew productivity by using Self Organizing Maps

A Self Organizing Map (SOM), is a machine learning method that represents high-dimensional data in low-dimensional form without losing topological relations of the data. After an unsupervised learning process, it organizes the data on the basis on similarity. In the current study, a SOM based algorithm has been developed which not only produces 2-D maps to analyze the relationship between various factors and crew productivity, but also predicts productivity under given conditions. Validation of the model has been achieved both by using artificial data set and data from 144 concrete pouring, 101 formwork and 101 reinforcement crews. The results show that maps which are produced by the model are satisfactory in clustering the data and prediction performance of the model is superior to similar artificial neural network models.     

Determination of radiation attenuation coefficients of heavyweight- and normal-weight concretes containing colemanite and barite for 0.663 MeV γ-rays

Accurate measurements have been made to determine radiation transmission of concretes produced with barite, colemanite and normal aggregate by using beam transmission method for 0.663 MeV γ-rays energy of ¹³⁷Cs radioactive isotopes by using NaI(Tl) scintillation detector. Linear and mass attenuation coefficients of thirteen heavy- and four normal-weight concretes were calculated. It was determined that the linear attenuation coefficient (μ, cm⁻¹) decreased with colemanite concentration and increased with barite concentration in both type of the concretes. Mass attenuation coefficient values of our concretes were compared with the values proposed by the United States National Institute of Standards and Technology (NIST).     

Marble mosaic tiling automation with a four degrees of freedom Cartesian robot

The art of mosaic has arisen thousands of years ago. Despite all those years and all the attention it has received till today, mosaic tiling is still being carried out manually and mosaic tiling processes have never been changed except the tool and material developments.     

An Industrial Competitiveness Model

The essence of strategic management is to generate within the firm the capability and the potentiality and then fully utilize them to better cope with competition. For this, however, the “competitiveness” level of a firm needs to be defined and measured. The present paper proposes a model for (i) measuring the competitiveness level of a given industrial firm, (ii) identifying the strengths and weaknesses of the firm, and (iii) formulating strategies to improve the competitive position of the firm. Field experience with this model is encouraging enough to discuss its usefulness as a tool for competitive strategy formulation.