Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Au and Au-Ag bimetallic nanoparticles synthesized by using 12-3-12 cationic Gemini surfactant as template

A seed-growth method has been applied to synthesize gold (Au) and Au-silver (Ag) bimetallic nanoparticles (NP) by using 12-3-12, a cationic Gemini surfactant, as a capping agent as well as micellar template. A systematic increase in the [12-3-12] from pre- to post-micellar region (up to 5 times the critical micelle concentration, cmc) produces Au NP from spherical to large plate like structures. Keeping [12-3-12] constant (equal to 1 / 2 cmc) and increasing ascorbic acid (AA) concentration lead to the formation of core shell type Au-Ag bimetallic NP. At maximum AA concentration (i.e. [AA] = 5.6 mM), fused bimetallic Au-Ag NP are obtained. The anisotropic growth of such materials is a key factor for various applications in nanotechnology.     

Densities and excess molar volumes of mixtures containing diesel,biodiesel and alkanols at temperatures from 288.15 to 313.15 K

The present work is focusing on the synthesization and physico-chemical properties of Jatropha curcas biodiesel with diesel and alcohols.The densities of binary diesel (2)+1-alkanols (C_3 or C_4)(3) and ternary Jatropha curcas biodiesel (1)+diesel (2)+1-alkanols (C_3or C_4)(3) blends have been reported over full range of composition at temperatures within range 288.15 to 313.15 K.Also densities of Jatropha curcas biodiesel (1)+diesel or 1-alkanols (C_3 or C_4)(2) blends have been measured at 313.15 K.Excess molar volumes,V~E,V~E_(123)of binary and ternary blends were calculated from the measured data and the derived properties were correlated to composition using Redlich–Kister equation.A reasonable agreement was found between the measured and estimated values.Further,densities and excess molar volumes data were reasoned to discuss molecular interactions taking into consideration effect of composition and temperature.     

Enhancement in magnetic permeability of Ni-Co-Zn ferrites using CuO doping for RF and microwave devices

Novel soft magnetic ferrite materials will play a crucial role in next-generation trillion-dollar sensor technologies related to 5G communications and internet of things as these materials can achieve improved wireless power/signal transfer efficiency with high operation frequency. In this work, Ni_0.4Co_0.25Zn_0.35Fe₂O₄ ferrites with high permeability and low magnetic loss were prepared for RF and microwave device applications. Composition and microstructure control is crucial to obtain the desired magnetic and loss properties. CuO dopant (x = 0 wt% to 20 wt%) were employed during the synthesis of Ni_0.4Co_0.25Zn_0.35Fe₂O₄ ferrite specimens to modify the microstructures, thus improving the magnetic properties of the ferrites. High value of measured relative permeability (μ’ of 4-10) and relatively low magnetic loss tangent ( of 0.01-0.1) has been achieved at frequency range between 100 and 800 MHz. Addition of CuO, especially up to 3 wt%, can cause a significant increase in permeability. Real part of the permeability of 3.87 and 10.9 has been achieved for undoped and 3 wt% CuO doped specimens, while noticeable reduction in magnetic losses has been observed for the doped sample measured at 400 MHz. The resonance frequency of synthesized ferrites has also been shifted into GHz range, when higher concentration of CuO dopants (>5 wt%) were employed.     

Vibrational dynamics and heat capacity in syndiotactic poly(propylene) form I

Normal modes of vibration of syndiotactic polypropylene (sPP) and their dispersion are obtained in the reduced zone scheme for helical form I having the conformational sequence (t₂g₂) using Urey-Bradley force field and Wilson's GF matrix method as modified by Higgs. Optically active frequencies corresponding to the zone center and zone boundary are assigned and characteristic features of the dispersion curves are discussed. In general the dispersion in the helical form is less as compared to the planar form. Heat capacity has been calculated via density-of-states using Debye relation in the temperature range 10-460 K and compared with the experimental measurements.     

A low cost approach for the fabrication of microwave phase shifter on laminates

This paper presents a simple and low cost fabrication approach using extended printed circuit board processing techniques for an electrostatically actuated phase shifter on a common microwave laminate. This approach uses 15 μm thin copper foils for realizing the bridge structures as well as for a spacer. A polymeric thin film deposited by spin coating and patterned using lithographic process is used as a dielectric layer to improve the reliability of the device. The prototype of the phase shifter for X-band operation is fabricated and tested for electrical and electromechanical performance parameters. The realized devices have a figure of merit of 70°/dB for a maximum applied bias potential of 85 V. Since these phase shifters can be conveniently fabricated directly on microwave substrates used for feed distribution networks of phased arrays, the overall addition in cost, dimensions and processing for including these phase shifters in these arrays is minimal.

     

Security-Performance Tradeoffs in a Class of Wireless Network Scenarios

There has been an extensive and widespread deployment of wireless local area networks (WLANs) for information access. The transmission, being of a broadcast nature, is vulnerable to security threats and hence, the aspect of security provisioning in these networks has assumed an important dimension. The security of the transmitted data over a wireless channel aims at protecting the data from unauthorized access. The objective is achieved by providing advanced security mechanisms. Implementing strong security mechanisms however, affects the throughput performance and increases the complexity of the communication system. In this paper, we investigate the security performance of a WLAN based on IEEE 802.11b/g/n standards on an experimental testbed in congested and uncongested networks in a single and multi-client environment. Experimental results are obtained for a layered security model encompassing nine security protocols in terms of throughput, response time, and encryption overhead. The performance impact of transmission control protocol and user datagram protocol traffic streams on secure wireless networks has also been studied. Through numerical results obtained from the testbed, we have presented quantitative and realistic findings for both security mechanisms as well as network performance. The tradeoff between the strength of the security protocol and the associated performance is analyzed through computer simulation results. The present real time analysis enables the network designers to make intelligent choices about the implementation of security features and the perceived network performance for a given application scenario.     

The interaction between skill, postures, forces and back pain in wool handling

Wool handling is an important rural occupation where workers process 200 or more fleeces daily, separating them into various quality components. Loads and postures they experience carry substantial risk of low back pain (LBP). Although a formal skill training structure exists, interaction with loads and LBP is unknown. We examined whether skill and LBP influenced trunk postures and loads of 60 wool handlers representing 3 skill levels. LBP prevalence ranged from 20% for junior (lowest skill) to 45% for open class (highest skill) wool handlers. Open class wool handlers demonstrated increased lateral bend and more axially twisted postures, generating greater medio-lateral shear forces and lateral bend and axial twist moments. LBP was associated with open class wool handlers spending more time in severe axially twisted postures. These findings suggest that skill-based training needs to be reviewed to reduce the quantity of axially twisted posture which may help reduce the prevalence of LBP in this workforce.