Low density polyethylene and grafted lignin polyblends using epoxy‐functionalized compatibilizer: mechanical and thermal properties

Lignin was graft copolymerized with methyl methacrylate using manganic pyrophosphate as initiator. This modified lignin was then blended (up to 50 wt%) with low density polyethylene (LDPE) using a small quantity of poly[ethylene‐co‐(glycidyl methacrylate)] (PEGMA) compatibilizer. The mechanical properties of the blend were substantially improved by using modified lignin in contrast to untreated lignin. Differential scanning calorimetry studies showed loss of crystallinity of the LDPE phase owing to the interaction between the blend components. Thermogravimetric analysis showed higher thermal stability of modified lignin in the domain of blend processing. This suggested that there is scope for useful utilization of lignin, which could also lead to the development of eco‐friendly products. Copyright © 2005 Society of Chemical Industry     

Biparietal diameter: a useful measure for determining gestational age of human abortuses

BACKGROUND: The crown-rump length is conventionally used to determine the age of human abortuses. However, it is not reliable as it is dependent on the positioning of the conceptus. We compared this with the biparietal diameter and foot length for determining the gestational age. METHODS: Different measurements, commonly used to assess gestational age, were measured in 146 human abortuses for which an accurate obstetric history could not be elicited. Measurements taken were crown-rump length, biparietal diameter and foot length. These were correlated with the observations at antenatal examinations before finalizing the approximate age. RESULTS: Multiple regression analysis of the data indicated that of the three measurements, the biparietal diameter was the most reliable for determining foetal gestational age between 8 and 26 weeks. The age determined with the biparietal diameter correlated well with that of abortuses with an accurate obstetric history. CONCLUSION: The biparietal diameter of a human foetus may be used to determine its age if the obstetric history regarding the period of gestation is vague or not available.     

Swelling behavior of hydroxyapatite‐filled chitosan–poly(acrylic acid) polyelectrolyte complexes

A family of hydroxyapatite (HAP)‐filled chitosan (CHI)–poly(acrylic acid) (PAA) polyelectrolyte complexes was prepared for the development of a degradable biocompatible organic matrix with nascent HAP that will degrade in vivo over a period of time. The effects of complexation on the degradation profile of the composites as well as the interaction between the CHI–PAA matrix and HAP in the composite system were evaluated by studying the swelling behavior of these composites in phosphate‐buffered saline (PBS) by varying their CHI–PAA ratio and HAP content. All composite systems showed a general trend of three stages of swelling with the variation in the degree of equilibrium swelling. The percentage weight gain initially decreased in a linear way with increases in the HAP weight percentages, leading to a first equilibrium swelling, represented by the plateau; further increased to a greater extent; and finally stabilized. The CHI/PAA/HAP composites were stable in PBS up to a period of more than 45 days whereas the 50/50 CHI/PAA control sample showed a single equilibrium attained after a period of 288 h. Further exposure of the specimen to the medium led to its disintegration. It was also observed that, even though CHI and PAA were capable of binding HAP, because of the lack of efficient binding, the integrity of the CHI–HAP and PAA–HAP composites were lost within 48 h. The 50/50/80 CHI/PAA/HAP composition showed the minimum amount of swelling in the series. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4716–4722, 2006     

A decision-making approach for energy efficiency improvement in municipal water pumps during water scarcity scenario

Cities in Sub-Saharan Africa suffer from widespread disparities in water supply due to depletion in groundwater and global-warming-induced changes in weather patterns. The offset of water head from the design considerations of water pumping systems has increased energy requirements leading to worsening of the situation with respect to availability of energy and water. Consequently, highly capitalized water supply schemes, which have been designed to meet the demand, are underutilized leading to operational inefficiencies. Robust empirical equations can help detect inefficiencies in water pumping systems, and this paper discusses the equations which were developed by analysing data obtained from various water supply utilities facing water scarcity. These equations provide cost-benefit analysis for decision making in water utilities and can bring about energy efficiency in municipal pumping operations.     

Effect of epoxy functionalized compatibilizer on the mechanical properties of low‐density polyethylene/plasticized tapioca starch blends

A series of low‐density polyethylene (LDPE) blends with varying proportions of plasticized tapioca starch have been used for the study of their mechanical properties. A functionalized epoxy resin, namely, poly(ethylene‐co‐glycidyl methacrylate) has been used as the compatibilizer. The impact and tensile properties have been measured by standard ASTM methods. The mechanical properties are seen to improve significantly with the addition of the epoxy compatibilizer, approaching values close to those of virgin LDPE. The scanning electron micrographs of the compatibilized blends show ductile failure which evidently contribute to improved mechanical properties. © 2001 Society of Chemical Industry     

Development of HDPE/EPDM‐g‐TMEVS nanocomposites with enhanced electrical and flame properties

Nanoclay reinforced HDPE/silane grafted EPDM composites have been developed using an epoxy functionalized HDPE as compatibilizer.The nanoclay has been varied from 0% to 10% in the composites along with the incorporation of compatibilizer and without compatibilizer in a brabender plasticorder.The dielectric and fire retardant properties of these nanocomposites have been examined. Addition of nanoclay enhanced char formation with increased values of limiting oxygen index. Electrical properties such as volume and surface Resistivity improved with addition of nanoclay and compatibilizer. The values of tan δ increased with increase in grafted EPDM and silanated nanoclay loading. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of compatibilization on mechanical and thermal properties of polypropylene–soy flour composites

A new biobased composite was developed by adding soy flour (SF) to polypropylene (PP). This composite shows an enhanced tensile strength and modulus but decrease in elongation at break. The compatibilizer (coupling agent) appears to have a synergistic effect on tensile strength. The presence of the compatibilizer improves the dispersion of SF in the PP matrix. The addition of glycerol plasticizer to the composite improves the processability resulting in improved performance, as compared to composites without glycerol plasticizer. The optimal compatibilizer content appears to be 6%.     

Starch/polyethylene nanocomposites: Mechanical,thermal, and biodegradability characteristics

Tapioca starch has been crosslinked and blended with 10% low density polyethylene (LDPE) with varying quantities of silane treated nanoclay using an epoxy functionalized LDPE as compatibilizer. The mechanical, thermal, water absorption, and biodegradability characteristics were investigated. The mechanical properties were considerably improved by crosslinking as compared to uncrosslinked composites. The flexural properties increased by more than 50% while tensile strength increased by one and half times. Biodegradability was initially inhibited but became rapid after the initial lag period. POLYM. COMPOS., 37:1384–1395, 2016. © 2014 Society of Plastics Engineers     

Hydroxyapatite filled chitosan-polyacrylic acid polyelectrolyte complexes

Chitosan (CHI) has been complexed with polyacrylic acid (PAA) in the presence of hydroxyapatite (HAP) to prepare composites intended for bone substitute applications. Thermogravimetric analysis of the composite showed that the presence of HAP had little effect on the degradation profile of the polyelectrolyte complex (PEC), except for the onset of degradation. Optimum compressive strength was observed for 70-weight percentage HAP filled PEC. The morphological analysis revealed that the HAP particles were uniformly distributed in the PEC matrix. The results indicate that HAP filled PEC of CHI and PAA could be prepared following the proposed simple route.     

Formation of ultrafine grained microstructure in the austenitic stainless steel and its impact on tensile properties

Commercial grade AISI 316L austenitic stainless steel was heavily cold rolled to 90% of thickness reduction. The cold rolled material was subjected to repetitive annealing treatment for short duration of 45-60 s at various temperatures. The microstructure of the cold rolled and after annealing was studied by optical as well as transmission electron microscope. The microstructural examination of the specimens after repetitive annealing process revealed the formation of ultrafine grain size microstructure. It was also noted that depending on the processing condition the grain size distribution varied widely. The tensile testing of the annealed specimen showed that the yield strength increased by 4-5 times that of the coarse grained material. However, a loss in the strain hardening ability was observed in these specimens. A good combination of yield strength and ductility for ultrafine grained stainless steel as compared to the coarse grained material could be obtained by the optimization of the microstructure.