Dietary exposure to acrylamide in a group of Japanese adults based on 24-hour duplicate diet samples

Acrylamide is a probable human carcinogen and known human neurotoxin that can be generated in food through heating. Using a mathematical modelling approach, our previous study estimated long-term average dietary exposure to acrylamide in the Japanese people; however, the validity of these estimates remained unknown. Here, we aimed to obtain a more accurate estimate of acrylamide exposure that would reflect the usual practice of heat processing and consumption of foods in the population. We collected duplicate diet samples and dietary records during 24 h from a group of Japanese adults. A total of 110 duplicate diet samples were analysed for acrylamide by LC-MS/MS. Data from individual dietary records were used to examine the association between dietary acrylamide exposure and consumption of selected food groups (e.g., coffee, tea, confectioneries, and vegetables prepared at high temperature [deep-frying, stir-frying, sautéing, and baking]). Of the 110 homogenised diet samples, 108 contained detectable levels of acrylamide. Dietary exposure to acrylamide ranged from 8 to 1582 ng/kg body weight (bw)/day, with the mean value of 215 ng/kg-bw/day and median value of 143 ng/kg-bw/day. This mean value was higher than the value we previously estimated for Japanese adults using a mathematical approach. Multiple linear regression analysis showed log dietary acrylamide exposure was significantly associated with consumption of coffee and vegetables prepared at high temperature during 24-hr of sampling (adj. R² = 0.250, p < 0.001). We revealed significant difference in dietary acrylamide exposure between participants who had coffee and vegetables prepared at high temperature (median, 169 ng/kg-bw/day; range, 35–1224 ng/kg-bw/day, n = 42) and those who had none of them (median, 75 ng/kg-bw/day; range, 8–311 ng/kg-bw/day, n = 15) (Steel-Dwass test, p < 0.05).     

Accelerator Analysis of Tributyltin Adsorbed onto the Surface of a Tributyltin Resistant Marine Pseudoalteromonas sp. Cell

Tributyltin (TBT) released into seawater from ship hulls is a stable marine pollutant and obviously remains in marine environments. We isolated a TBT resistant marine Pseudoalteromonas sp. TBT1 from sediment of a ship’s ballast water. The isolate (10^{9.3 ± 0.2} colony-forming units mL⁻¹) adsorbed TBT in proportion to the concentrations of TBTCl externally added up to 3 mM, where the number of TBT adsorbed by a single cell was estimated to be 10^8.2. The value was reduced to about one-fifth when the lysozyme-treated cells were used. The surface of ethanol treated cells became rough, but the capacity of TBT adsorption was the same as that for native cells. These results indicate that the function of the cell surface, rather than that structure, plays an important role to the adsorption of TBT. The adsorption state of TBT seems to be multi-layer when the number of more than 10^6.8 TBT molecules is adsorbed by a single cell.     

Efficient photodiode-waveguide coupling for hybrid integrated optical circuits

A GalnAsP edge-detecting photodiode was coupled with an SiO2-TiO2 single-mode waveguide in a simple hybrid integration scheme. The newly developed edge-detecting photodiode with a window region was used to improve photodiode durability.     

Potential bile acid metabolites. 24. An efficient synthesis of carboxyl-linked glucosides and their chemical properties

A facile and efficient synthesis of the carboxyl-linked glucosides of bile acids is described. Direct esterification of unprotected bile acids with 2,3,4,6-tetra-O-benzyl-d-glucopyranose in pyridine in the presence of 2-chloro-1,3,5-trinitrobenzene as a coupling agent afforded a mixture of the α- and β-anomers (ca. 1∶3) of the 1-O-acyl-d-glucoside benzyl ethers of bile acids, which was separated effectively on a C₁₈ reversedphase chromatography column (isolated yields of α- and β-anomers are 4–9% and 12–19%, respectively). Subsequent hydrogenolysis of the α- and β-acyl glucoside benzyl ethers on a 10% Pd−C catalyst in acetic acid/methanol/EtOAc (1∶2∶2, by vol) at 35°C under atmospheric pressure gave the corresponding free esters in good yields (79–89%). Chemical specificities such as facile hydrolysis and transesterification of the acyl glucosides in various solvents were also discussed.     

MHz-driven snubberless zero-current soft-switching high step-up DC-DC converter with a multi-resonant tank

A novel high step-up DC-DC converter suitable for the power interface of fuel cells (FC) is presented in this paper. The proposed converter features a multi-resonant tank for achieving high-step up ratio under zero current soft switching (ZCS) without any snubber circuits. The simple and minimized-component topology is beneficial for megahertz driving of gallium nitride (GaN) power transistors with effective reductions of switching loss, electromagnetic emission interference (EMI) noise, and ripple-free DC input current. Mode-transitional power stages are described in detail, following that the high step-up principle is revealed by means of frequency-domain analysis. The essential performances of the proposed circuit topology are demonstrated by simulation and experiment of 1.8 MHz-120W prototype whereby effectiveness of the snubberless and multi-resonant topology are verified from the practical point of view.     

Two-stage nuclear demagnetization refrigerator

Two-stage nuclear demagnetization has been performed using PrCu₆ and Cu as coolants. The Cu nuclear stage reached temperatures as low as 10 K with a rate of temperature rise of less than a few K/h. The corresponding conduction electron temperature is estimated to be less than 50 K. A nuclear orientation thermometer of Al ⁵⁴Mn has been successfully used to measure temperatures down to 10 K.Supported by the Japan Society for the Promotion of Science.     

Development of Selective TGR5 Ligands Based on the 5,6,7,8-Tetrahydro-5,5,8,8-tetramethylnaphthalene Skeleton

TGR5, a G-protein-coupled receptor (GPCR), plays an important role in several physiological functions. TGR5 activation through bile acids induces an increase in energy expenditure. Therefore, synthetic TGR5 ligands could be useful for the treatment of obesity or dyslipidemia. In this study, we designed and synthesized a set of TGR5 ligands with a 5,6,7,8-tetrahydro-5,5,8,8-tetramethylnaphthalene (TMN) skeleton, and evaluated their TGR5 agonistic activity. We also investigated the selectivity of the synthesized compounds for TGR5 relative to the farnesoid X receptor (FXR) and retinoic acid receptor (RAR). Our results show that compound 4 b [N-(2-chlorophenyl)-5,6,7,8-tetrahydro-5,5,8,8-tetramethyl-2-naphthalenecarboxamide] exhibited potent TGR5 agonist activity with an IC₅₀ value of 8.4 nM without significant cytotoxicity. In addition, compound 4 b showed only slight agonistic activity toward FXR and RAR at 1 μM treatment. These data indicate that compound 4 b is a selective TGR5 agonist, and could be a promising therapeutic agent for dyslipidemia.     

Design of multi-layer coated particles with sigmoidal release pattern

In order to design and control the release pattern of an active solid component, we investigated the release characteristics of core particles coated with multiple layers of fine permeable particles surrounding soluble particles dispersed in layers of impermeable wax. We examined the effect of operational conditions on the parameters of the release profile by multivariate analysis, and obtained simplified correlations for the maximum release rate and the lag time of the release curve as a function of the volume fraction of permeable particles and the thickness of the permeable- and soluble-particle layers. The results confirmed that the desired release rate could be obtained in the first place by adjusting the volume fraction and the thickness of the permeable-particle layer, while it was also possible to attain the required lag time by changing the thickness of the soluble layer. Finally, the calculation examples successfully illustrated the possibility of our being able to design the controlled-release particles with a prescribed sigmoidal release.     

Reduction of Second-Order Temperature Dependence of Athermal AWG With Resin-Filled Groove by Pressure Control

In this letter, we have developed a novel technique for improving the temperature stability of an athermal silica-based arrayed-waveguide grating with a resin-filled groove. We compensated for the residual second-order temperature dependence of the passband wavelength using the pressure-induced refractive index change in a resin inserted into the optical paths. Pressure control under the temperature variation was achieved by using a structure composed of an optical fiber piston and bimetal actuators. We demonstrated that the passband wavelength variation was successfully reduced from 0.080 to 0.025 nm in a -40degC - 85degC temperature range, without any insertion loss increase or spectral change.