Further characterisation of protease inhibitors from pigeon pea (cajanus cajan (l) millsp) seeds

Cajanus trypsin inhibitor (CTI) and Cajanus trypsin-chymotrypsin inhibitor (CTCI) previously purified from cv TAT-10 were further characterised. The modification of the inhibitors revealed the presence of lysine at the trypsin reactive site in both CTI and CTCI. Modification of tyrosine at the reactive site of CTCI did not abolish chymotrypsin inhibition suggesting the presence of leucine or phenylalanine as reported in other chymotrypsin inhibitors. CTCI did not contain tryptophan. Dissociation constants for the inhibitors with bovine trypsin were in the region of 0.69 nmol (CTCI) and 0.029 nmol (CTI). Although the protease inhibitors lost their inhibitory activity on exposure to 2-mercaptoethanol they remained attached to the enzyme. The inhibitors were not very effective against the protease from Helicoverpa armigera which is a serious field pest of Cajanus. Dissociation constants for the inhibitors with the larval enzyme were in the region of 100 nmol.     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

XML: a door to automated Web applications

In Japanese culture, your meishi conveys your place in the company, even in society, as well as your name, phone number, and e-mail address. That is to say, in Japan, business cards matter. They convey complex metadata about the people who carry them. Like people, Web pages come in an abundance of shapes and sizes (and sounds). What makes them machine interpretable-and therefore a new medium for communicating information globally-is Hypertext Markup Language. HTML allows the structural markup of Web documents, distinguishing the elements of a page with tags and declaring the physical relationships among the various document elements. This organizes the display of information and allows humans to read and use it. To give machines this capability, however, requires semantic markup, identifying what each particular element means on its own (for example, “this is a home street address” or “this is an e-mail address”). Semantic markup would change what is now simply displayed content to machine readable, structured content. The Extensible Markup Language (XML) specification, first released as two working drafts in 1997 by the World Wide Web Consortium, makes it dramatically easier to develop and deploy domain- and mission-specific Web pages. We describe the evolution of the Web's data representation from display formats to structural markup to semantic markup     

On the synthesis and characterization of a new manganite type CMR material: La0.7Hg0.3MnO3

A new manganite type CMR material, La_0.7Hg_0.3MnO₃ has been successfully synthesized and has been found to exhibit magnetoresistance (≈9%) at low fields (≈1.5 kG). The synthesis has been carried out through a solid state reaction route consisting of the formation of La_0.7MnO₃ followed by diffusion of Hg leading to La_0.7Hg_0.3MnO₃. The as grown samples are polycrystalline and correspond to an orthorhombic unit cell with the lattice parameters; a=5.5183 Å, b=5.6383 Å and c=7.5368 Å. The typical grain size as revealed by scanning electron microscopy is in the range of 0.5–2 μm. The ρ–T behaviour shows a peak at T_IM=227 K. The ρ–T behaviour above this temperature corresponds to that of an insulator and below this to that of a metal. The ρ–T behaviour remains unaltered when a magnetic field (H_dc=1.5 kG) is applied. However, with this magnetic field a drop in the resistivity is observed up to 77 K. At room temperature the magnetoresistance ratio (MRR) is too small but it steadily increases as the temperature is decreased. Thus, MRRs at 227.13 and 77 K are 3.41 and 9.05%, respectively, in an applied field of H_dc=1.5 kG. At a given temperature the variation in MRR with field H_dc is rapid at lower field values (H_dc<1.2 kG) and scales linearly for higher field values (H_dc>1.2 kG). It may be mentioned that the present work on the synthesis and magnetoresistance behaviour of La_0.7Hg_0.3MnO₃, is the first of its type.     

Hydrodynamics and liquid phase axial mixing in orifice pipe reactor

Two phase flow in a horizontal pipe, with orifice plates placed at regular intervals as obstructions, was studied for the effect of phase velocities on flow patterns, fractional phase hold-ups, pressure drop and liquid phase axial dispersion. Radioactive technetium-99m (as an aqueous solution of sodium pertechnatate) was used as tracer. A pulse injection technique with two point measurements was employed. Three different orifice diameters were used (8 mm, 16 mm, and 20 mm) in a pipe diameter of 32 mm. The orifice spacing was 500 mm in all cases. Superficial gas (air) velocity was varied over a range from 0.02 m/s to 1.0 m/s and superficial liquid (water) velocity from 0.03 m/s to 0.85 m/s. Different flow patterns under different flow conditions were identified and a generalised flow map is presented. Variations in hold-ups and pressure drop with flow patterns have been explained. Rational correlations have been developed for fractional phase hold-ups and pressure drop. A preliminary comparison of two phase gas-liquid flow in a horizontal pipe with orifice obstructions (to be called orifice pipe reactor), as a gas-liquid contacting device, is made with a conventional bubble column reactor. Recommendations have been made for future work.     

Polypropylene/Clay nanocomposites: Effect of compatibilizer on the thermal,crystallization and dynamic mechanical behavior

Polypropylene (PP)/clay nanocomposites are prepared using different grades of PP, compatibilizers, and organically modified clays. The melt intercalation of the PP is carried out in presence of a compatibilizer. The nanocomposites are characterized using various techniques for the structure and properties. X‐ray diffraction results indicate well‐defined structures. Thermogravimetric analysis indicates improved thermal stability of PP/clay nanocomposites. Isothermal crystallization studies carried out using differential scanning calorimeter illustrate enhanced crystallization of PP in all the nanocomposites. Optical microscopic study demonstrates that the nanocomposites can be crystallized at higher temperatures, exhibiting well‐defined birefringent structures. The dynamic mechanical analysis reveals higher storage moduli over a temperature range of ?40⁰C to 120⁰C for nanocomposites, and the extent of increase in the storage modulus is dependent on the type of compatibilizer used.     

Comparative Study of the Different Variants of the DV-Hop Based Node Localization Algorithms for Wireless Sensor Networks

Wireless Personal Communications - Node localization is one of the essential services where sensor nodes in the wireless sensor network collaborate to provide location information of sensor nodes...