Improving Short-Circuit Current Capacity, Resistance, and Breaking Load of OPGW Constructions by Modifying Aluminium Alloy With AlB2

This article presents a method that can be applied to molten AA-6101 alloy to improve electrical properties of the aluminium part of the optical ground wire (OPGW) used in overhead transmission lines to protect phase conductors from lightning strike and to transmit signals and data. AA-6101 alloy in casting of the log as 6 m length and 178 mm diameter for extrusion has been inoculated by AlB₂ to decrease detrimental effects of Cr, Ti, V, and Zr on the conductivity of the material. After inoculation, improved billets were extruded as 9.5 mm diameter feedstock. Required wires drawn from the feedstock according to the construction types of OPGW to be tested were exposed to aging at 175°C, 6 h (T-8). Upon completion of the back-twist and performing-type stranding process, resistance, and short-circuit current capacity and breaking load of the OPGW 88/44 constructions with other metal combinations have been examined and tested to show improvement. Results are summarized in tables and graphically.     

Supercritical fluid extraction of daphne (Laurus nobilis L.) seed oil

Laurus nobilis L., commonly known as daphne tree, is an evergreen that belongs to the Lauraceae family. Daphne trees produce grape-sized shiny purplish berries having three parts: flesh, skin, and an inner kernel (single seed). This study examines supercritical CO₂ (SC-CO₂) extraction of oil from daphne seeds. The oil yield of ground seeds varied from 14 to 28% depending on the method and particle size used for oil recovery. Yields were similar for both petroleum ether and SC-CO₂ extraction. The extraction yield decreased significantly with increasing particle size. The amount of extract collected increased exponentially with increasing SC-CO₂ pressure. The highest extraction yield was obtained at the highest temperature studied, 75°C. More than 45% of the oil was lauric acid. SC-CO₂ is a viable technique to obtain high-purity L. nobilis L. seed oil, which is a potential ingredient for the cosmetic industry.     

Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys

In this systematic study, dispersion-strengthening effect of the Cu–25.91Mn (wt.%), Cu–26.62Mn–8.99Al (wt.%), Cu–22.17Mn–12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature in different periods and cooled with different cooling rates. After processes, microanalysis of the samples were interpreted by using scanning electron microscope (SEM) and weight percentages of the elements of the occurrence phases in the samples obtained by using electron dispersion spectroscopy (EDS) technique. Additionally, some characteristic properties of the heat treated samples with different conditions of Cu–Mn, Cu–Mn–Al, Cu–Mn–Zn ingot alloys were also discussed.     

A new QoS-aware TDMA/FDD MAC protocol with multi-beam directional antennas

With the ever-increasing demand for wireless real-time services and continuing emergence of new multimedia applications especially for mobile users, it is necessary for the network to support various levels of quality of service (QoS) while maximizing the utilization of scarce and expensive wireless channel resources. Considering this fact, a new TDMA/FDD MAC protocol integrating a novel QoS management algorithm and multi-beam Directional Antennas (DAs) to efficiently exploit wireless resources has been developed and presented in this paper. It supports all ATM CBR, VBR, ABR and UBR service classes by adopting a well-managed dynamic guarantee-based QoS scheduling algorithm. The work mainly aims at increasing the wireless system throughput as well as improving the call-blocking ratios and end-to-end delays for real-time applications. This seamless communication enables both handling real-time multimedia traffics in a fair manner and granting call requests on the basis of the connection types. The system has been developed, modeled and simulated using OPNET Modeler. The simulation results show that the QoS-aware TDMA/FDD MAC with multi-beam DAs has substantially increased the system throughput and that the call-blocking ratio has been reduced from 86% to 18%, when the proposed MAC with 8-Beam antennas is employed instead of the regular MAC.     

A set of new Chebyshev kernel functions for support vector machine pattern classification

In this study, we introduce a set of new kernel functions derived from the generalized Chebyshev polynomials. The proposed generalized Chebyshev polynomials allow us to derive different kernel functions. By using these polynomial functions, we generalize recently introduced Chebyshev kernel function for vector inputs and, as a result, we obtain a robust set of kernel functions for Support Vector Machine (SVM) classification. Thus in this study, besides clarifying how to apply the Chebyshev kernel functions on vector inputs, we also increase the generalization capability of the previously proposed Chebyshev kernels and show how to derive new kernel functions by using the generalized Chebyshev polynomials. The proposed set of kernel functions provides competitive performance when compared to all other common kernel functions on average for the simulation datasets. The results indicate that they can be used as a good alternative to other common kernel functions for SVM classification in order to obtain better accuracy. Moreover, test results show that the generalized Chebyshev kernel approaches to the minimum support vector number for classification in general.     

Interferometer-based structured-illumination microscopy utilizing complementary phase relationship through constructive and destructive image detection by two cameras

In an interferometer-based fluorescence microscope, a beam splitter is often used to combine two emission wavefronts interferometrically. There are two perpendicular paths along which the interference fringes can propagate and normally only one is used for imaging. However, the other path also contains useful information. Here we introduced a second camera to our interferometer-based three-dimensional structured-illumination microscope (I(5)S) to capture the fringes along the normally unused path, which are out of phase by π relative to the fringes along the other path. Based on this complementary phase relationship and the well-defined phase interrelationships among the I(5)S data components, we can deduce and then computationally eliminate the path length errors within the interferometer loop using the simultaneously recorded fringes along the two imaging paths. This self-correction capability can greatly relax the requirement for eliminating the path length differences before and maintaining that status during each imaging session, which are practically challenging tasks. Experimental data is shown to support the theory.     

Estimation of target station data using satellite data and deep learning algorithms

In this study, an innovative model has been developed for wind speed estimation through the Deep Learning method using hourly wind speed data from the measurement stations of the General Directorate of Meteorology in Van and Hakkari provinces in Turkey in conjunction with simultaneous satellite images from Eumetsat. Obtained satellite images were used during the introduction of the model, while wind speed data were used at the output stage. As a result of the findings, it was found that 85% accuracy performance could be achieved to provide sufficient insight for systems that are widely established worldwide. The model, developed as a result of the study, eliminates the need to install wind measuring stations for any region on earth within the satellite field in terms of determining wind potential. Since the field of view of the Meteosat 7 satellite covers the whole of Eastern Europe, it was determined that it could predict a high rate of up to 6 hours later by the method used in image analysis. The systems to be controlled with this method will be able to examine the weather events instantly at each point in the satellite field of view and make more accurate decisions. Also, companies will be able to perform a more detailed and rapid field scan compared to existing limited methods, and reduce initial investment costs and operating costs in terms of renewable energy resources investments.     

Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics

In this study, effects of 0.5, 1.0 and 1.5 mole% CuO addition on the properties of potassium sodium niobate (K_0.5Na_0.5)NbO₃-KNN ceramics were investigated. Pure KNN and CuO-added KNN pellet samples were sintered at 1100 and 1090 °C for 4 h, respectively. Phase analysis showed that all samples crystallized in pure orthorhombic perovskite phase. Addition of 1.0 and 1.5 mole% CuO caused grain growth, densification and formation of a liquid phase at the grain boundaries. Curie temperature has shifted from 480 to 435 °C with increasing CuO ratio. The most remarkable characteristic of the hysteresis loops were the constricted nature of the 0.5 mole% CuO-added KNN's curve and the antiferroelectric-like appearance of the 1.5 mole% CuO-added KNN's curve. Piezeoelectric properties of d₃₃ = 120 pC/N, k_p = 0.27 and Q_m = 772 were obtained from the 1.5 mole% CuO-added KNN.