The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Polymeric absorbent for water sorption based on chemically crosslinked poly (acrylamide/2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt) hydrogels

Summary Swelling equilibrium of polyelectrolyte copolymer gels containing of acrylamide (AAm) and 2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt (AMPS) have been studied as a function of copolymer composition. AAm/AMPS hydrogels were prepared by free radical solution polymerization in aqueous solution of AAm with AMPS as anionic comonomer and two multifunctional crosslinkers such as ethylene glycol dimethacrylate (EGDMA) and trimethylolpropane triacrylate (TMPTA). Swelling experiments were performed in water at 25 °C, gravimetrically. The influence of AMPS content in hydrogels was examined. Swelling of AAm/AMPS hydrogels was increased up to 1018% (for containing 2% AMPS and crosslinked by EGDMA) 15246% (for containing 8% AMPS and crosslinked by TMPTA), while AAm hydrogels swelled up to 804% (crosslinked by TMPTA)–770% (crosslinked by EGDMA). The values of equilibrium water content of the hydrogels are 0.8851–0.9935. Diffusion behavior was investigated. Water diffusion into hydrogels was found to be non-Fickian in character.     

Development of topical hydrogels of terbinafine hydrochloride and evaluation of their antifungal activity

The purpose of this study was to prepare hydrogels and microemulsion (ME)-based gel formulations containing 1% terbinafine hydrochloride (TER-HCL) and to evaluate the use of these formulations for the antifungal treatment of fungal infections. Three different hydrogel formulations were prepared using chitosan, Carbopol® 974 and Natrosol® 250 polymers. A pseudo-ternary phase diagram was constructed, and starting from ME formulation, a ME gel form containing 1% Carbopol 974 was prepared. We also examined the characteristic properties of the prepared hyrogels. The physical stability of hydrogels and the ME -based gels were evaluated after storage at different temperatures for a period of 3 months. The release of TER-HCL from the gels and the commercial product (Lamisil®) was carried out by using a standard dialysis membrane in phosphate buffer (pH 5.2) at 32?°C. The results of the in vitro release study showed that the Natrosol gel released the highest amount of drug, followed by Carbopol gel, chitosan gel, commercial product, and the microoemulsion-based gel in that order. In vitro examination of antifungal activity revealed that all the prepared and commercial products were effective against Candida parapsilosis, Penicillium, Aspergillus niger and Microsporum. These results indicate that the Natrosol®-based hydrogel is a good candidate for the topical delivery of TER-HCL.     

Contextual Information Requirements of Cost Estimators from Past Construction Projects

Past project data sources provide key information for construction cost estimators. Previous research studies show that relying only on one’s own experience during estimation results in estimators’ bias. Having and referring to historical databases, containing objective information on what happened in past projects, are essential for reducing estimators’ biases. The first step toward development of useful project history databases is to understand what information estimators require from past projects. The research described in this paper targets estimators’ information needs identified through interviews, brainstorming sessions, task analyses, and card games conducted with estimators with different experience levels and specialized in heavy/civil and commercial construction projects, and exploration of historical and standard databases available in companies to determine what is being currently represented. Findings show that estimators need contextual information, depicting the conditions under which specific production rates were achieved, so that they can identify which production rate would be more realistic to use during the production rate estimation of an activity in a new bid. Comparison of the contextual information needs identified in this research with information items available in historical data sources (such as company cost reports, RSMeans, previous studies) highlighted some gaps and important opportunities for improvements in those sources. The identified contextual information items are significant for practitioners in developing ways to augment their existing project history databases to make them more beneficial for estimators.     

The effects of achromatic and chromatic color schemes on participants' task performance in and appraisals of an office environment

This study explores the effects of chroma on participants' performance and environmental appraisal of an office. The research was conducted in a full‐scale experimental room designed as a private office where achromatic and chromatic color schemes with coequal values were applied. Sixty participants were assigned tasks and given a questionnaire to appraise the spatial color schemes. The findings show that chroma significantly affects performance and space appraisal. In terms of accuracy and time spent performance scores measured significantly better in the room with the chromatic scheme than those in the room with the achromatic scheme. The office with the chromatic scheme was found to be more pleasant, attractive, satisfying and dynamic than the one with the achromatic scheme, whereas the achromatic scheme was thought to be more formal and harmonious. Categorization of pleasantness, harmony, dynamism and spaciousness by factor analysis also showed differences between the achromatic and chromatic schemes. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2012     

IDENTIFICATION OF CONTINUOUS‐TIME POWER SPECTRA BY GENERALIZED FOURIER SERIES

In this paper, we present a generalized Fourier series based algorithm for the identification of continuous‐time, linear‐time invariant systems from power spectrum measurements. The algorithm is strongly consistent and it is used in the design of a linear shaping filter for a single‐track road power spectrum.     

Study on nonpremixed methane/air combustion from flame structure and NOX emission aspect for different burner head structures

In the present study, the air turbulator, which is a part of a nonpremixed burner, is investigated numerically in terms of its effects on the diffusion methane flame structure and NO_X emissions. A computational fluid dynamics (CFD) code was used for the numerical analysis. At first, four experiments were conducted using natural gas fuel. In the experimental studies, the excess air ratio was taken constant as 1.2, while the fuel consumption rate was changed between 22 and 51 Nm³/h. After the experimental studies, the CFD studies were carried out. Pure methane was taken as fuel for the simulations. The nonpremixed combustion model with the steady laminar flamelet model (SFM) approach was used in the combustion analyses. Methane‐air extinction mechanism with 17 species and 58 reactions was used for the simulations. The results obtained from the CFD studies were confronted with the measurements of the flue gas emissions in the experimental studies. Then, a modified burner head was analysed numerically for the different air turbulator blade numbers and angles. The CFD results show that increasing the air turbulator blade number and angle causes the thermal NO emissions to be reduced in the flue gas by making the flame in the combustion chamber more uniform than the original case. This new flame structure provides better mixing of the fuel and combustion air. Thus, the diffusion flame structure in the combustion chamber takes the form of the partially premixed flame structure. The maximum reduction in the thermal NO emissions in the flue gas is achieved at 38% according to the original case.     

Substitution of Reduction Clearing Step by Ozone Treatment at Disperse Dyeing of Polyester

The effectiveness of ozone treatment for the afterclearing of disperse dyed poly (ethylene terephthalate) (PET) fibers has been examined. Two types of disperse dyed PET samples were selected among commercial mass production range of Akbaslar textile mill. The reduction clearing procedure applied during mass production was taken as the reference reduction clearing treatment; these reference samples were taken after dyeing and reduction clearing processes at the mill. Samples of disperse dyed PET were also taken before reduction clearing in order apply ozone treatment in the laboratory as the tested afterclearing method. Color and wash-fastness properties of the reduction cleared and ozone treated fabric samples were compared and reported. Results indicated acceptable color and wash-fastness results comparable to those of reduction cleared samples for ozone treated samples. The success of ozone treatment for the black dyed PET sample at 7.0% depth of shade was especially outstanding. Ozone treatment was applied in cold water without addition of any chemicals for very short treatment times when compared to conventional reduction clearing. Ozone treatment created substantial energy and chemical savings as well as lower environmental impact.     

A Novel Polymeric Adsorbent for Water and Dye Uptake: Acrylamide/Sodium Acrylate Copolymers and Semi-Interpenetrating Polymer Networks Composed of Gelatin and/or PVA

Gelatin (GEL) and poly (vinyl alcohol) (PVA)-based semi-interpenetrating polymer network (semi-IPN) hydrogels were prepared for cationic dye sorption. Chemically cross-linked copolymer of acrylamide/sodium acrylate (AAm/SA) with PVA and/or GEL were prepared by polymerization of aqueous solution of AAm, and SA using ammonium persulphate/N,N,N’,N’-tetramethylethylenediamine as redox initiating pair in presence of poly(ethylene glycol)diacrylate as cross-linker. FTIR analysis was used for structural characterization. Surface morphology was characterized by SEM. Methyl violet has been used in sorption studies. Water uptake, and dye sorption properties of the cross-linked polymeric systems were investigated as a function of chemical composition of the hydrogels.     

Swelling Characterization and Adsorptive Features of Acrylamide/Itaconic Acid Hydrogels and Semi-IPNs for Uranyl Ions

A novel semi-interpenetrating network (semi-IPNs) hydrogel, composed of acrylamide (AAm) with itaconic acid (ITA) as co-monomer, with poly (ethylene glycol)(PEG) and trimethylolpropane triacrylate (TMPTA) was prepared. Hydrogels and semi-IPNs were synthesized by free radical solution polymerization. Swelling experiments were performed in water and aqueous solutions of uranyl acetate. Diffusion behavior was investigated and their diffusion into hydrogels was found to be non-Fickian in character. Sorption of uranyl ion onto the polymeric system was studied by a batch sorption technique at 25°C. The sorption capacity, removal effiency and partition coefficient of the hydrogels were investigated.