Limitations of the method using peroxidase activity of hemoglobin for detecting lipid hydroperoxides

The method using peroxidase activity of hemoglobin (Hb) for the determination of lipid peroxides was examined by using pure methyl linoleate hydroperoxides, trilinoleoylglycerol hydroperoxides and egg yolk phosphatidylcholine hydroperoxides as substrates and tetramethyl benzidine as electron donor for the peroxidase reaction of Hb. The reactivities of these substrates were quite varied. Furthermore, some electron donors were tested for peroxidase activity of Hb, but none showed a complete reduction of methyl linoleate hydroperoxides. From these results, it seems the Hb method needs to be carefully applied to biological materials that contain mixtures of different types of lipid classes.     

Anisotropic structure of alkali metaphosphate glasses

Orientation anisotropy, which is well known in organic polymers with appropriate network structures, is less common in oxide glasses. We present the intermediate-range order in anisotropic alkali metaphosphate glass which consists of oriented PO₄ tetrahedral chains and intervening alkali cations along the elongation direction. The X-ray total structure factor S(Q) indicates that the inter-chain spacing depends on the size of alkali cations and varies from 5.03 to 6.28 Å. The mixed alkali effect is primarily related to an increase of the separation. The total correlation function T(r) provides the first definite evidence that the anisotropic structure is composed of phosphorus-bridging oxygen bonds (P–O_B) lying along the elongation direction and phosphorus-non-bridging oxygen bonds (P–O_T) oriented perpendicular to the elongation direction. The present result unveils fundamental aspects of the anisotropic structure of an oxide glass and provides essential information for the development of oxide glasses to control structural anisotropy.     

Mechanical properties of a new type of apatite-containing glass-ceramic for prosthetic application

A new type of apatite-containing glass-ceramic in the system MgO-CaO-SiO₂-P₂O₅ can form a tight chemical bond with bones and has a high mechanical strength. The cause for its high mechanical strength was examined by comparing mechanical properties of the glass-ceramics which have an identical chemical composition and different microstructures. It was found that the mechanical strength of the apatite-containing glass-ceramics is considerably increased by the precipitation of-wollastonite crystals due to an increase in fracture surface energy resulting in an increase in fracture toughness.     

Secondary electron emission and glow discharge properties of 12CaO·7Al2O3 electride for fluorescent lamp applications

12CaO·7Al₂O₃ electride, a sub-nanoporous compound having a work function of 2.4 eV, was examined as a candidate cathode material in fluorescent lamps. The electron emission yield was higher and the discharge voltage was lower for 12CaO·7Al₂O₃ than for existing cathode materials such as Ni, Mo or W; therefore, the energy consumption of the fluorescent lamps can be improved using 12CaO·7Al₂O₃ cathodes. Prototype glow-discharge lamps using 12CaO·7Al₂O₃ were constructed and exhibited reasonable durability.     

Mechanical Properties of Anisotropic Metaphosphate Glass

The effect of anisotropy on the mechanical properties was investigated for a chain‐structured metaphosphate glass (12.5Li₂O–12.5Na₂O–12.5K₂O–12.5Cs₂O–50P₂O₅ mol%). Anisotropic glasses with different birefringence values were prepared with a fiber elongation method. The strength and Young's moduli of the glasses were measured with a three‐point bending method. It was found that the strength and Young's modulus increased with increasing birefringence, reaching about 160% and 140%, respectively, compared with the values for the isotropic glass. The enhancement of the mechanical properties was attributed to the orientation of ‐P‐O‐P‐ chains in the glass.     

Enhanced anthocyanin production from grape callus in an air-lift type bioreactor using a viscous additive-supplemented medium

An N-medium containing carboxymethyl cellulose (CMC) was applied to an air-lift type bioreactor culture of grape (Vitis vinifera cv. Bailey alicant A.) callus, and anthocyanin production was investigated. Grape callus grew well at an air flow rate of 80 ml/min and anthocyanin production was significantly increased in the N-medium, reaching 17 mg/l after 7 d of culture. The anthocyanin content of the N-medium was about two times higher than that of the conventional medium without CMC. The effect of air flow rate was also investigated within the range from 40 to 160 ml/min. A twofold increase in anthocyanin content was obtained at all the air flow rates tested in the N-medium. The distribution of grape callus size obtained after 7 d of the bioreactor culture was investigated. The average callus size was 490 mum which was 1.6 times larger than that obtained in the conventional medium. It was found that large calli with a relatively high anthocyanin pigment content were formed in the bioreactor culture using the N-medium. The fluid dynamics in the bioreactor was also investigated at three points (top, middle and bottom) in the bioreactor by laser doppler velocimetry. The average axial velocity of the circulated medium was 0.4 times lower than that of the conventional medium while their average radial velocities were almost the same (zero). The standard deviation of radial velocity fluctuation in the N-medium was also 0.4 times less than that in the conventional medium. These results suggest that turbulent flow occurred in the bioreactor culture using the conventional medium and the degree of turbulent flow decreased significantly when 0.8% CMC was added to the medium to prepare the N-medium. A change of the flow pattern is considered to be the cause of the decrease in hydrodynamic stress, resulting in enhanced pigment production due to the enlargement of the callus.     

Direct Observation of Crack Tip Geometry of SiO2 Glass by High-Resolution Electron Microscopy

Crack tips in thin SiO₂ glass films were observed directly by high-resolution/high-voltage electron microscopy. An elliptical crack with radius of curvature ∼ 1.5 nm was observed. When the glass film with the crack was soaked in water at 90°C for 7 d, the crack tip became blunt by a process of dissolution and precipitation.     

A New Low-Brittleness Glass in the Soda-Lime-Silica Glass Family

In the soda-lime-silica glass family, the effect of each constituent of the composition on the brittleness was first investigated. Vickers indentation was employed to estimate the brittleness (ratio of harness ( H ) to fracture toughness ( K _c)) by measuring the C / a ratios (where C and a are the characteristic crack and indentation diagonal lengths, respectively). It was observed that a higher silica content and a lower lime content helped to lower the brittleness. Substitution of potash and magnesia for soda and calcia, respectively, was effective in lowering the brittleness. From these results, a higher molar volume was found to be a key factor for reducing the brittleness. A new low-brittleness glass was then developed with a brittleness as low as 5.1 µm^-1/2 as compared with the brittleness of 7.1 µm^-1/2 for commercial soda-lime-silica glass. The crack initiation load ( P *), measured by the Vickers indentation method, for this new low-brittleness glass was almost 10 times as high as P * of commercial soda-lime-silica glass. The new glass shows lower hardness and higher fracture toughness than the commercial soda-lime-silica glass.     

Flow visualization and numerical analysis of a new mixing equipment with vibratory fins

The mixing performance of a new type of mixing equipment which has several fin oscillators on a pair of shafts with a vibrating motor was investigated. This mixing equipment, which is mainly used for industrial plating processes, was usually operated at a vibrating frequency of about 40 Hz with the amplitude 1 mm. The flow visualization in this equipment showed that the flow in the vessel at laminar flow region was vertically divided into two distinct symmetric regions. The numerical simulation of the flow and the mixing patterns agreed well with the visualization result at laminar flow region.