Optimization of waste quail eggshells as biocomposites for polyaniline in ammonia gas detection

A simple, cost-effective, and novel chemical sensor for ammonia (NH₃) gas detection was developed from polyaniline (PANI)/quail eggshell (QES) composites. QES is a natural waste enriched in calcium carbonate. In this work, pure PANI was synthesized from chemical oxidation method and PANI/QES composites were prepared from physical mixing of QES with the synthesized PANI at different mass ratio. A series of complementary techniques including Fourier transform infrared and ultraviolet-visible spectrometers, scanning electron microscope with energy dispersive detection coupled with mapping, thermogravimetric analysis, and X-ray diffractometer were used to characterize the physicochemical and textural properties of the biocomposites. From the results, PANI/QES composite with a mass ratio of 1 exhibited the lowest NH₃ detection limit of 5.24 ppm with a linear correlation coefficient (R²) of close to unity (0.9932) between the signal and NH₃ gas concentration. As a whole, the PANI/QES biocomposites synthesized from this work exhibited excellent selectivity toward NH₃ gas even in the presence of other gas impurities, such as acetone, ethanol, and hexane. For the sensor reusability, the PANI/QES biocomposites can be reused in the application of NH₃ gas detection for at least 4 cycles.     

Spatio–Temporal Transform Based Video Hashing

Identification and verification of a video clip via its fingerprint find applications in video browsing, database search and security. For this purpose, the video sequence must be collapsed into a short fingerprint using a robust hash function based on signal processing operations. We propose two robust hash algorithms for video based both on the discrete cosine transform (DCT), one on the classical basis set and the other on a novel randomized basis set (RBT). The robustness and randomness properties of the proposed hash functions are investigated in detail. It is found that these hash functions are resistant to signal processing and transmission impairments, and therefore can be instrumental in building database search, broadcast monitoring and watermarking applications for video. The DCT hash is more robust, but lacks security aspect, as it is easy to find different video clips with the same hash value. The RBT based hash, being secret key based, does not allow this and is more secure at the cost of a slight loss in the receiver operating curves     

Algebraic properties of cryptosystem PGM

In the late 1970s Magliveras invented a private-key cryptographic system calledPermutation Group Mappings (PGM). PGM is based on the prolific existence of certain kinds of factorization sets, calledlogarithmic signatures, for finite permutation groups. PGM is an endomorphic system with message space ℤ_|G| for a given finite permutation groupG. In this paper we prove several algebraic properties of PGM. We show that the set of PGM transformations ℐ _G is not closed under functional composition and hence not a group. This set is 2-transitive on ℤ_|G| if the underlying groupG is not hamiltonian and not abelian. Moreover, if the order ofG is not a power of 2, then the set of transformations contains an odd permutation. An important consequence of these results is that the group generated by the set of transformations is nearly always the symmetric group ℒ_|G|. Thus, allowing multiple encryption, any permutation of the message space is attainable. This property is one of the strongest security conditions that can be offered by a private-key encryption system. S. S. Magliveras was supported in part by NSF/NSA Grant Number MDA904-82-H0001, by U.S. West Communications, and by the Center for Communication and Information Science of the University of Nebraska.     

Spin glass behaviour in the Co2−xZnxTiO4 compound

A.c. susceptibility measurements were carried out on the disordered spinel system Co_2–x Zn _x TiO₄ (0<x<1) between 10 and 80 K. Our measurements show three peaks in the versus T curve for Co₂TiO₄ and CoZnTiO₄ compounds. In both compounds two peaks are very close to each other, indicating that the Néel and semi-spin glass temperatures are very close. A third peak indicates the presence of the semi-spin glass to spin glass transition. In Co_1.5Zn_0.5TiO₄ only one peak is observed which indicates spin glass ordering at 26 K. Furthermore, the A-site canting present in Co₂TiO₄ and CoZnTiO₄ has a collinear and magnetic structure, indicating strong A-B coupling. X-ray analysis indicated that compounds of the system Co₂Zn_xTiO₄ synthesized with cubic symmetry. From transport properties it was found that the activation energy and thermoelectric coefficient decrease with increasing concentration of Zn in the system. The mobility of the system calculated from infrared measurements is typically of the order of 10^–9cm²V^–1s^–1.     

A spectroscopic study of vanadium-phosphate glasses containing vanadium chloride

The optical properties of vanadium-phosphate glasses containing various amounts of (V₂O₅)₅₀(P₂O₅)_50–x (VCl₃) _x , wherex = 0.05, 0.06, 0.08 and 0.1, were measured as a function of VCl₃ content. It is found that by adding VCl₃ to the melt when the glass is formed, the added chlorine which acts as an oxidizing agent alters the ratio of concentration of vanadium ions and thus the absorption coefficient. Data on absorption in this study show that the power law,() =B() –E ₀) ⁿ / is best followed forn = 3, and the absorption is solely due to vanadium oxide. Furthermore, the infrared absorption spectra of this system were investigated in the wave number range 400 to 4600cm^–1. The addition of VCl₃ to the vanadium-phosphate glasses does not seem to introduce any new absorption band in this range as compared with the spectrum of a pure vanadium-phosphate glass. Furthermore, no significant difference in the absorption spectra was observed by annealing the V₂O₅-P₂O₅ glasses up to 200° C.     

Towards a distributed multi-agent framework for shared resources scheduling

Nowadays, manufacturers have to share some of their resources with partners due to the competitive economic environment. The management of the availability periods of shared resources causes a problem because it is achieved by the scheduling systems, which assume a local environment where all resources are on the same site. Therefore, distributed scheduling with shared resources is an important research topic. In this communication, we introduce the architecture and behaviour of DSCEP framework (Distributed, Supervisor, Customer, Environment, and Producer) under shared resources situation with disturbances. We are using a simple example of manufacturing system to illustrate the ability of DSCEP framework to solve the shared resources scheduling problem in complex systems.     

Phosphate sorption approach for determining phosphorus requirements of wheat in calcareous soils

Five field experiments involving P application rates from 0 to 66 kg P ha^–1 were conducted on irrigated wheat at Tandojam, Pakistan. The soils belonged to two great soil groups, Torrifluvent and Camborthid. All soils were calcareous. Olsen-P contents ranged from 3.5 to 6.3 mg P kg^–1. Phosphate sorption curves were developed for soils from control (no P) plots at each site. Concentrations of P in solution established by fertilization in the field as estimated from the sorption curves ranged from 0.008 to 0.16mg P L^–1. Actual grain yields were converted to relative grain yields and plotted against corresponding concentrations of P in solution. Yield response to P application was obtained in each experiment. Control plot yields ranged from 57 to 89% of maximum yield of respective experiments. Phosphorus requirements of wheat were 0.032 mg L^–1 for 95% yield as determined from a composite yield response curve. Predicted quantities of P required to attain 0.032 mg P L^–1 ranged from 18 to 29 kg P ha^–1. The results of the study suggest that the P sorption approach can be used as a rational basis for making P fertilizer recommendations for various soil-crop combinations.     

Breaking the Responsivity-Bandwidth Trade-Off Limit in GaN Photoelectrodes for High-Response and Fast-Speed Optical Communication Application

Underwater optical communication (UOC) has attracted considerable interest in the continuous expansion of human activities in marine/ocean environments. The water-durable and self-powered photoelectrodes that act as a battery-free light receiver in UOC are particularly crucial, as they may directly face complex underwater conditions. Emerging photoelectrochemical (PEC)-type photodetectors are appealing owing to their intrinsic aqueous operation characteristics with versatile tunability of photoresponses. Herein, a self-powered PEC photodetector employing n-type gallium nitride (GaN) nanowires as a photoelectrode, which is decorated with an iridium oxide (IrO_x) layer to optimize charge transfer dynamics at the GaN/electrolyte interface, is reported. Strikingly, the constructed n-GaN/IrO_x photoelectrode breaks the responsivity-bandwidth trade-off limit by simultaneously improving the response speed and responsivity, delivering an ultrafast response speed with response/recovery times of only 2 µs/4 µs while achieving a high responsivity of 110.1 mA W⁻¹. Importantly, the device exhibits a large bandwidth with 3 dB cutoff frequency exceeding 100 kHz in UOC tests, which is one of the highest values among self-powered photodetectors employed in optical communication system.     

A new method of reinforcing graphene nanoplatelets in glass/epoxy composites

This research aims to develop a method for the amalgamation of graphene nanoplatelets in glass/epoxy composites. The poor interface bonding between the fiber and matrix is critical and hinders the full performance of the composites. Glass fabric and epoxy were used as reinforcement and matrix in the composite, respectively. Graphene nanoplatelets were utilized as an additional nano-materials filler for the composites. Glass/graphene/epoxy and glass/epoxy composites were fabricated via vacuum infusion molding. The new method of applying graphene nanoplatelets as secondary reinforcement in the composite was developed based on proper functionalization in the sonication process. The physical, tensile, flexural, and short beam interlaminar properties of fabricated composites were examined to analyze the method's effectiveness. The results showed that density decreased by around 5 %; however, thickness increased by around 34 % after introducing graphene nanoplatelets into the composites. The tensile strength and modulus of the composites declined by approximately 19 %, on the other hand, flexural strength and modulus increased by around 63.3 % and 8.3 %, respectively, after the addition of graphene nanoplatelets into the composites. Moreover, interlaminar shear strength of the composite was enhanced by approximately 50 %.     

Generating Event Sequence-Based Test Cases Using GUI Runtime State Feedback

This paper presents a fully automatic model-driven technique to generate test cases for Graphical user interfaces (GUIs)-based applications. The technique uses feedback from the execution of a “seed test suite,” which is generated automatically using an existing structural event interaction graph model of the GUI. During its execution, the runtime effect of each GUI event on all other events pinpoints event semantic interaction (ESI) relationships, which are used to automatically generate new test cases. Two studies on eight applications demonstrate that the feedback-based technique 1) is able to significantly improve existing techniques and helps identify serious problems in the software and 2) the ESI relationships captured via GUI state yield test suites that most often detect more faults than their code, event, and event-interaction-coverage equivalent counterparts.