An investigation of the ordered DO19 phase formation in the Ti-Al system

For the Ti-rich, Ti-AI system, the- and- ₂ phase boundaries have been obtained through differential thermal analysis for alloy compositions ranging from 10.2 to 25.2 at% Al (6 to 16 wt% Al). It has been shown that in the above mentioned composition range, a metastable disordered-phase can be quenched in. This metastable then transforms to the ordered ₂(DO)₁₉ phase upon heating and/or isothermal ageing. It has also been observed that the kinetics of this ordering phenomenon is composition dependent.     

The inhibitive effect of extraneous ion addition on stress corrosion cracking of alpha-brass

The addition of ammonium chloride, cobalt sulphate, cesium sulphate and ethylene diamine to a Mattsson solution and the addition of ammonium sulphate to the Pugh solution have been found to produce an inhibitive effect on the stress corrosion cracking of alpha-brass in these solutions. Ammonium chloride and ammonium sulphate additions affect the tarnish formation on the specimen as well as the cracking pattern. Electrochemical polarization studies have also been carried out with these two additives. The observations have been explained in the light of adsorption of these ionic species at selected sites on the metal surface and their possible interference with the cathodic reactions.     

Electrothermal study of carbon loaded ethylene-vinylacetate copolymer

Temperature dependence of resistance of carbon black loaded ethylene-vinylacetate (EVA) copolymer was studied from ?100 to 250°C in a modified differential scanning calorimeter (DSC) apparatus. Both room temperature resistivity and positive temperature coefficient of resistance (PTC) effects can be correlated with carbon black parameters (structure, surface area, porosity). Room temperature resistivity and the degree of increase of resistivity, (ratio of maximum to minimum) progressively decrease with carbon black structure if occlusion of polymer by carbon black is considered in calculating the volume fraction. An integrated surface areastructure-porosity equivalence of the carbon black is derived by introducing factors proportional to the volume and porosity of the black used. Any black parameter that increases conductivity (loading, surface area, structure, porosity) decreases the PTC effect. A cable compounder can therefore minimize the undesirable impact of PTC by suitable choice of black-parameters. The necessary considerations for other uses, where PTC effect is used for microswitches, heaters, etc., will be just the opposite. The modified DSC method provides a quick scanning tool for determining the suitability of semicrystalline polymer recipes, either for cable or for any other material using the PTC effect.     

Proteome of human endometrium: Identification of differentially expressed proteins in proliferative and secretory phase endometrium

Purpose: To exploit the potential of proteomics to identify and study additional yet‐unidentified important proteins present in human endometrium. Experimental design: The proteome of human endometrium would be established using 2‐DE and MALDI and the data analyzed to identify differential protein expression in the proliferative and secretory phase of the menstrual cycle using PDQuest software and MALDI. Results: In the present work, 2‐DE of human endometrium protein led to the resolution of over 200 spots. Subsequent MALDI analysis of 215 spots allowed the identification of 194 proteins. A total of 57 out of the 215 spots were found to be differentially expressed, out of which 49 could be identified using MALDI. These differentially expressed proteins included structural proteins, molecular chaperones, signaling proteins, metabolic proteins, proteins related to immunity, RNA biogenesis, protein biosynthesis and others. The differential expressions of seven representative proteins in secretory and proliferative phase endometrium tissue were confirmed by immunoblot analysis. Conclusion and clinical relevance: This study establishes the 2‐D proteome of human endometrium represented by 194 identified protein spots. The present data provides an important clue towards determining the function of these proteins with respect to endometrium related diseases.     

Synthesis and characterization of nanostructured CaSiO3 biomaterial

Here we report a successful preparation of nanostructured calcium silicate by wet chemical approach. The synthesized sample was characterized by various physico-chemical methods. Thermal stability was investigated using thermo-gravimetric and differential thermal analysis (TG-DTA). Structural characterization of the sample was carried out by the X-ray diffraction technique (XRD) which confirmed its single phase hexagonal structure. Transmission electron microscopy (TEM) was used to study the nanostructure of the ceramics while homogeneous grain distribution was revealed by scanning electron microscopy studies (SEM). The elemental analysis data obtained from energy dispersive X-ray spectroscopy (EDAX) were in close agreement with the starting composition used for the synthesis. Superhydrophilic nature of CaSiO₃ was investigated at room temperature by sessile drop technique. Effect of porous nanosized CaSiO₃ on early adhesion and proliferation of human bone marrow mesenchymal stem cells (BMMSCs) and cord blood mesenchymal stem (CBMSCs) cells was measured in vitro. MTT cytotoxicity test and cell adhesion test showed that the material had good biocompatibility and promoted cell viability and cell proliferation. It has been stated that the cell viability and proliferation are significantly affected by time and concentration of CaSiO₃. These findings indicate that the CaSiO₃ ceramics has good biocompatibility and that it is promising as a biomaterial.     

Time delays and angles of arrival estimation using known signals

Channel estimation in a multipath mobile communication system is addressed in this paper, and a novel approach based on the linear prediction in frequency domain and the singular value decomposition technique is presented for joint estimation of the angles of arrival and the time delays of multiple reflections of a known signal. Simulation results illustrating the performance of the proposed algorithm are included, and the results show that the proposed method is close in accuracy when compared to the iterative maximum-likelihood method. However, when the two methods are compared in computational complexity, it is demonstrated that the proposed method reduces the complexity to nearly half of that of the maximum-likelihood method. The Cramer–Rao bounds are computed for comparison.     

Influence of zeolite on electrochemical and physicochemical properties of polyethylene oxide solid electrolyte

A composite polymer electrolyte of polyethyleneoxide-LiBF₄ containing fine particles of zeolite was studied using electrochemical impedance spectroscopy, cyclic voltammetry, differential scanning calorimetry, infrared spectroscopy and scanning electron microscopy. When compared with the polymer electrolyte without zeolite, the specific conductivity of the composite electrolyte film is higher by about two orders of magnitude at room temperature. The increase in specific conductivity is explained as due to increased amorphocity which is reflected in the thermal studies. The nature of the cyclic voltammograms and infrared spectra is discussed.Part of this work was presented at the Electrochemical Society Meeting, Honolulu, Hawai (May 1993).     

On the measurement of sorption kinetics by differential test: Effect of the heat of sorption

It is shown by a simplified theoretical analysis of the heat dissipation from the adsorbent particles during the measurement of sorption kinetics that even a small change in the adsorbent temperature can cause significant error in the calculation of the sorption diffusivity by the assumption of isothermal behavior. Thus, the use of a differential step change in the adsorbate loading during the kinetic measurements, which produces a small change in the adsorbent temperature, may not assure correct interpretation of the data by the isothermal models.     

Estimation of hole conductivity of AgI through tarnishing studies of silver in iodine vapour at about room temperature

This work reports the hole conductivity data of growing AgI film on silver both for the thicker (5500 to 30 000 Å) and thinner (<6000 Å) ranges at about room temperature. Hole conductivity has been estimated through tarnishing studies of silver in iodine atmosphere and estimation has been based on the fundamental equation of Wagner relating the rate constant and the conductivity of the film. It is revealed that the thinner films show a higher hole conductivity than that of the thicker films under similar temperature and iodine pressure.