Non-equilibrium Thermodynamics of Rayleigh–Taylor Instability

Here, the fundamental problem of Rayleigh–Taylor instability (RTI) is studied by direct numerical simulation (DNS), where the two air masses at different temperatures, kept apart initially by a non-conducting horizontal interface in a 2D box, are allowed to mix. Upon removal of the partition, mixing is controlled by RTI, apart from mutual mass, momentum, and energy transfer. To accentuate the instability, the top chamber is filled with the heavier (lower temperature) air, which rests atop the chamber containing lighter air. The partition is positioned initially at mid-height of the box. As the fluid dynamical system considered is completely isolated from outside, the DNS results obtained without using Boussinesq approximation will enable one to study non-equilibrium thermodynamics of a finite reservoir undergoing strong irreversible processes. The barrier is removed impulsively, triggering baroclinic instability by non-alignment of density, and pressure gradient by ambient disturbances via the sharp discontinuity at the interface. Adopted DNS method has dispersion relation preservation properties with neutral stability and does not require any external initial perturbations. The complete inhomogeneous problem with non-periodic, no-slip boundary conditions is studied by solving compressible Navier–Stokes equation, without the Boussinesq approximation. This is important as the temperature difference between the two air masses considered is high enough (\(\Delta T = 70\) K) to invalidate Boussinesq approximation. We discuss non-equilibrium thermodynamical aspects of RTI with the help of numerical results for density, vorticity, entropy, energy, and enstrophy.     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

低VOC涂料用成膜助剂

随着环保法规的日益严格和人们环境质量意识的增强,研发新型材料,采用新工艺是降低VOC的有效途径。本文介绍了新型油酸类无溶剂型成膜助剂,能有效降低涂料中的VOC含量以及提高涂料相应性能。     

Metronidazole-loaded nanostructured lipid carriers to improve skin deposition and retention in the treatment of rosacea

The objective of the present investigation was to improve the skin deposition and retention of metronidazole (MTZ) in rosacea therapy by incorporating it into nanostructured lipid carriers (NLCs). The main challenge in this endeavor was the partial hydrophilicity of MTZ, which mandated careful selection of excipients, including solid and liquid lipids, surfactants, and their ratios in combination. NLCs were produced by the phase inversion temperature method and finally converted into a gel for topical application. The prepared nanoparticles were evaluated for their particle size, zeta potential, entrapment efficiency, solid-state characteristics, surface morphology, in vitro drug release, and permeation through excised skin. The gel was additionally characterized for its pH, drug content, viscosity, and spreadability. The prepared nanoparticles were spherical in shape and of size less than 300?nm. Incorporation of judiciously chosen excipients made possible a relatively high entrapment efficiency of almost 40%. The drug release was found to be biphasic, with an initial burst release followed by sustained release up to 8?hours. In comparison to the plain drug gel, which had a tissue deposition of 11.23%, the NLC gel showed a much superior and desirable deposition of 26.41%. The lipophilic nature of the carrier, its size, and property of occlusion enabled greater amounts of drug to enter and be retained in the skin, simultaneously minimizing permeation through the skin, i.e. systemic exposure. The results of the study suggest that NLCs of anti-rosacea drugs have the potential to be used in the therapy of rosacea.     

Neuroprotective Strategies for Traumatic Brain Injury: Improving Clinical Translation

Traumatic brain injury (TBI) induces secondary biochemical changes that contribute to delayed neuroinflammation, neuronal cell death, and neurological dysfunction. Attenuating such secondary injury has provided the conceptual basis for neuroprotective treatments. Despite strong experimental data, more than 30 clinical trials of neuroprotection in TBI patients have failed. In part, these failures likely reflect methodological differences between the clinical and animal studies, as well as inadequate pre-clinical evaluation and/or trial design problems. However, recent changes in experimental approach and advances in clinical trial methodology have raised the potential for successful clinical translation. Here we critically analyze the current limitations and translational opportunities for developing successful neuroprotective therapies for TBI.     

Antifungal activity of five different essential oils in vapour phase for the control of Colletotrichum gloeosporioides and Lasiodiplodia theobromae in vitro and on mango

Mango fruit has high commercial value; however, major postharvest losses are encountered throughout the supply chain due to postharvest diseases. These results lead to the search for natural fungicide for postharvest diseases control. The antifungal effects of five essential oils (thyme, clove, cinnamon, anise and vitex) were assessed by disc volatilisation method. Thyme oil vapours at 5 μL per Petriplate, and clove and cinnamon oil at 8 μL per Petriplate showed 100% growth inhibition of mango pathogens in vitro. GC/MS analysis of essential oil showed thymol (23.88), o‐cymol (23.88) and terpinolene (23.88) as the major constituents of thyme oil. Clove and cinnamon oils contain 3‐allyl‐2‐methoxyphenol (37.42%) and benzofuran 3‐methyl (17.97%), respectively. Thyme oil as a fumigant at 66.7 μL L^?1 showed a significant (P < 0.05) inhibition on postharvest pathogens of mango fruits stored at 25 °C for 6 days. Results of our study suggest the possibility of using thyme oil as an alternate natural fungicide to manage postharvest diseases in mango.     

Carbohydrate polymers of chirata (Swertia chirata) leaves: Structural features, in vitro anti-oxidant activity and fluorescence quenching study

Chirata (Swertia chirata) is widely used in Indian folk medicine for the prevention of various disorders. Herein, we analyzed the water-extracted carbohydrate polymer (WECP) of this herb using chemical, chromatographic, and spectroscopic methods. The anti-oxidant capacity of this fraction was studied by ferric reducing anti-oxidant power (FRAP) and DPPH radical assays. Effect of WECP on bovine serum albumin spectrum (BSA) was determined using excitation wavelength of 282 nm. Anion exchange chromatography of WECP yielded 5 fractions (F1–F5) with different chemical compositions. The major fraction (F5) was homogeneous, had an apparent molecular mass of 4.5 kDa, and contains both carbohydrates (57%) and phenolics (34%). The anti-oxidant capacities of WECP and F5 were comparable to standard anti-oxidants. Notably, activities of the carbohydrate polymers (F1–F5) correlate with their phenolics content. Fluorescence quenching measurement suggests that F5 can form complex with BSA and the value of the binding constant is K=6.28×10⁵/M.     

Closed form stiffness matrices and error estimators for plane hierarchic triangular elements

Closed form expressions for the stiffness matrix and a simple error estimator and error indicator are derived for plane straight sided triangular finite elements in elasticity problems. The calculation of the error estimator is performed on an element by element basis, and is found to be very accurate and efficient. In general, the solutions for benchmark problems using the error indicators for selective refinement of the regions show accelerated convergence when compared to the convergence rate of solutions using uniform mesh refinement. Evaluation of the stiffness matrices and error estimators using explicit formulations is found to be several times faster than numerical integration.     

Sorption characteristics of foam concrete

Knowledge of sorption characteristics like absorption and sorptivity of building materials are of importance as they affect the durability and other properties. In the case of lightweight concrete like aerated and foam concrete, the moisture movement behaviour becomes more complex as such concretes contain much larger volume of air voids. This paper is aimed at investigating the sorption-related properties of foam concrete as affected by its composition and pore structure. Water absorption by complete immersion and sorptivity are measured for various mixes with different fly ash replacement levels for sand and different foam volume. It was found that sorption values are lower than the corresponding base mix (without foam) and the values reduce with increase in foam volume. It is also found that sorption depends on the filler type, density and pore structure and also on permeation mechanisms.