CTR: Carry Time-Based Routing for Increasing Delivery Ratio in Mobile Social Networks

Wireless Personal Communications - Mobile social network is a kind of social networks through which the nodes have some social features such as: gender, job, friendship relations, centrality, and...     

一种新型弹载偶极子天线分析与设计

给出了一种新型结构的弹载偶极子天线,采用基于自补结构的蛇形振子作为辐射器,并用矩量法对振子结构进行优化,采用简化形式的锥形BALUN以实现平衡馈电。测试结果表面该天线具有良好的E面全向特性和宽带特性。主要分析了该天线的辐射特性,最后给出并分析了实测数据。该天线具有结构紧凑、馈电简单、带宽较宽、易于制作等优点。     

多进制数字调相系统分析与设计方法的探讨

对数字通信中MPSK系统的调制与解调问题进行了较为的分析，并以8PSK和循环码16PSK系统为例，阐述其调制器电路的逻辑设计方法。在此基础上给出了8PSK系统调制与解调的一种方案，讨论了循环码和自然二进制码16PSK系统的调制器的具体设计过程，该设计方法可应用于一般MPSK系统的逻辑设计。     

Computer Aided Tolerance assignment

Tolerances are basic to the production of every part. This is because perfect parts cannot be produced with existing processes and machines. The determination of tolerances for the individual parts of a functional assembly is critical, but not trivial. Numerous approaches are suggested in past literature for (analytical) tolerance allocation. With the advent of total automation, more attempts are being made to computerize manual design tasks. Tolerance design, assignment and allocation can also be fully automated if the assembly function can be estimated by the computer.

In the present paper, an attempt is made to computerize tolerance assignment. A simple example of a two piece assembly, viz., a fit, is used to demonstrate the developed methodology. A feature extraction is first performed from both detail and assembly drawings. Then, probable assembly interfaces are determined using a rule based procedure. Consequently, tolerances are assigned to the basic dimensions of each feature and to the assembly interfaces using a tolerance database and user interaction. More complex analysis for tolerance allocation is also under study.     

基于ATM的网络互连方式

ＡＴＭ技术能否在数据通信网中广泛采用取决于其是否能高效地支持现有业务，其中主要为非连接业务。本文介绍了几种基于ＡＴＭ 的非连接业务支持方式和协议体系结构，对其进行了评述并对ＩＰ分组到ＡＴＭ信元的封装效率进行了分析。     

Low-loss high power RF switching using multifinger AlGaN/GaN MOSHFETs

We demonstrate a novel RF switch based on a multifinger AlGaN/GaN MOSHFET. Record high saturation current and breakdown voltage, extremely low gate leakage current and low gate capacitance of the III-N MOSHFETs make them excellent active elements for RF switching. Using a single element test circuit with 1-mm wide multifinger MOSHFET we achieved 0.27 dB insertion loss and more than 40 dB isolation. These parameters can be further improved by impedance matching and by using submicron gate devices. The maximum switching power extrapolated from the results for 1A/mm 100 /spl mu/m wide device exceeds 40 W for a 1-mm wide 2-A/mm MOSHFET.     

加氢催化剂器外再生技术(HCRT)的开发与应用

淄博恒基化工有限公司开发的加氢催化剂器外再生技术 (HCRT) ,具有工艺合理、再生催化剂物性恢复好、活性损失少等特点 ,该技术已达到国外器外再生技术的水平。近年来已再生全国 19个炼油厂、2 3个品种的催化剂 12 95t,工业应用均取得满意结果     

Photocatalytic degradation of methyl tert‐butyl ether (MTBE) in contaminated water by ZnO nanoparticles

BACKGROUND: Over the past several decades methyl tert‐butyl ether (MTBE) as additive to gasoline, intended to either boost ratings of fuel or to reduce air pollution, has been accepted worldwide. Since MTBE has high water solubility, the occurrence of fuel spills or leaks from underground storage tanks or transferring pipeline has led to the contamination of natural waters. In this study the degradation of aqueous MTBE at relatively high concentrations was investigated by a UV‐visible/ZnO/H₂O₂ photocatalytic process. The effects of important operational parameters such as pH, amount of H₂O₂, catalyst loading and irradiation time were also investigated. Concentration of MTBE and intermediates such as tert‐butyl formate and tert‐butyl alcohol were measured. RESULTS: Time required for complete degradation increased from 20 to 150 min when the initial concentration was increased from 10 to 500 mg L^?1. The first‐order rate constants for degradation of MTBE were estimated to be 0.183–0.022 min^?1 as the concentration increased from 10 to 500 mg L^?1. Study of the overall mineralization monitored by total organic carbon analysis showed that at an initial concentration of 100 mg L^?1 MTBE complete mineralization was obtained after 100 min under UV‐visible/ZnO/H₂O₂ photocatalysis. CONCLUSION: The data presented in this paper clearly indicated that UV‐visible/ZnO/O₂ as an advanced oxidation process provides an efficient treatment alternative for the remediation of MTBE‐contaminated waters. Copyright © 2008 Society of Chemical Industry     

On the path and efficiency of two micromachines with rigid tails

This paper reports on the results of investigation of the swimming of two different micro-machines. Mechanically each of these micro-machines consists of a head (containing an electromechanical power source) and a tail which moves relative to the head as a rigid body. The problem is approached theoretically by considering the types of movement which can occur for these micro-machines immersed in a viscous medium. The first micro-machine has a tail which oscillates in vertical plane, therefore the trajectory of this machine is in that plane too. The tail of the second micro-machine roates conically, so it produces a three dimensional helical path in space with its axis approximately along the direction of tail centreline.Using the boundary element method for solving the traction equations on the surface of the tail, and a time-dependent Euler kinematic scheme to plot the path, the net propulsive force and torque, the translational velocity, angular velocity and the trajectory of each machine are calculated. Evaluation of the path and the direction of motion for each micro-machine using different dimensional parameters can give an idea of the efficiency for such machines with rigid tails.