Groundwater Level Simulation Using Soft Computing Methods with Emphasis on Major Meteorological Components

Water Resources Management - Precise estimation of groundwater level (GWL) might be of great importance for attaining sustainable development goals and integrated water resources management....     

A hierarchical fuzzy system for modeling driver’s behavior

The study of human behavior during driving is of primary importance for improving the driver??s security. In this study, we propose a hierarchical driver_vehicle_environment fuzzy system to analyze driver??s behavior under stress conditions on a road. We include climate, road and car conditions in fuzzy modeling. For obtaining fuzzy rules, experts?? opinions are benefited by means of questionnaires on effects of parameters such as climate, road and car conditions on driving capabilities. The number of fuzzy rules is optimized by Particle Swarm Optimization (PSO) algorithm. Also the frequency of pressing on brake and gas pedals and the number of car??s direction changes are used to determine the driver??s behavior under different conditions. Three different positions are considered for driving and decision making; one position in driving lane and two positions in opposite lane. A fuzzy model called Model 1 is presented for modeling the change of steering angle and speed control by considering time distances with existing cars in these three positions, the information about the speed and direction of car, and the steering angle of car. The behaviors of different drivers under two stress conditions are investigated. Also we obtained two other models based on fuzzy rules called Model 2 and Model 3 by using Sugeno fuzzy inference. Model 2 has two linguistic terms and Model 3 has four linguistic terms for estimating the time distances with other cars. The results of three models are compared. The comparative studies have shown that simulation results are in good agreement with the real world situations.     

Effects of Solvent Exchange Period and Heat Treatment on Physical and Chemical Properties of Rice Husk Derived Silica Aerogels

In this study, hydrophobic silica aerogels were synthesized from rice husk ash-derived sodium silicate through sol-gel processing, solvent exchange, surface modification and ambient pressure drying. By volume, 10% of trimethylchlorosilane (TMCS) in 90% of n-hexane was used as a hydrophobic solution in the surface modification process. The physical and chemical properties of silica aerogels were characterized by density and porosity measurements, scanning electron microscopy (SEM), Fourier transforms infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller theory (BET) and dynamic scanning calorimetry (DSC). The hydrogels prepared were in the form of 2.5 ± 0.5 mm beads and then converted into alcogels through solvent exchange with ethanol for repetition of 3, 6 and 9 days. It is found that the optimal quality of silica aerogels with the BET surface area as high as 668.82 m²/g was obtained from the alcogels of the solvent exchange period of 9 days. Depending on the size of the gel’s block, a longer solvent exchange period will ensure adequate removal of pore water. Post heat treatment on silica aerogels obtained from the 9 days of solvent exchange at 200, 300 and 400 °C for 2 h results in slight decreased of aerogel’s density from 0.048 g/cm³ to 0.039 g/cm³ and the hydrophobicity of the aerogels is decreased above 380 °C as confirmed by DSC analysis.

     

On-line determination of supersaturation of a kcl-nacl aqueous solution based on density measurement

A method is developed for the calculation of the saturation temperature of a KCI-NaCI aqueous solution, based on the measurement of the density and temperature of a sample solution, and prior knowledge of the NaCl concentration. Experimental density and solubility data for solutions saturated with KCI in the temperature range of 299 to 321 K with concentrations of NaCl greater than 0.200 kg/kg H₂O were used to develop the empirical correlation allowing the calculation of the solution saturation level. The method is applicable in the on-line determination of the level of supersaturation in a KCI crystallizer in which the NaCl concentration is known. Knowledge of the prevailing supersaturation is necessary for the control of crystal purity and crystal size distribution in industrial potash crystallizers.     

Networked Estimation of Multi‐Agent Systems Subject to Faults and Unreliable Information

In this paper, a novel framework for networked estimation of multi‐agent systems subject to presence of actuator faults is proposed. This framework is developed based on the notion of sub‐observers where within a group of sub‐observers each sub‐observer estimates certain states that are conditioned on a given input, output, and other state information. We model the overall estimation process by a weighted estimation (WE) digraph. By selecting an appropriate path in the WE digraph, an assigned supervisor can select and configure a set of sub‐observers to successfully estimate all the system states. In the presence of large intermittent disturbances, noise, and faults certain sub‐observers may become invalid, and consequently the supervisor reconfigures the set of sub‐observers by selecting a new path in the estimation digraph such that the impacts of these uncertainties are confined to only the local estimators. This will prevent the propagation of uncertainties on the estimation performance of the entire multi‐agent system. Simulation results provided for a five satellite formation flight system in deep space confirm the validity and applicability of our proposed analytical work.     

Stability of nonlinear hybrid dynamical systems with time delay via sum of squares decomposition

Considering an infinite number of eigenvalues for time delay systems, it is difficult to determine their stability. We have developed a new approach for the stability test of time delay nonlinear hybrid systems. Construction of Lyapunov functions for hybrid systems is generally a difficult task, but once these functions are found, stability’s analysis of the system is straight-forward. In this paper both delay-independent and delay-dependent stability tests are proposed, based on the construction of appropriate Lyapunov-Krasovskii functionals. The methodology is based on the sum of squares decomposition of multivariate polynomials and the algorithmic construction is achieved through the use of semidefinite programming. The reduction techniques provide numerical solution of large-scale instances; otherwise they will be computationally infeasible to solve. The introduced method can be used for hybrid systems with linear or nonlinear vector fields. Finally simulation results show the correctness and validity of the designed method. Recommended by Editorial Board member Young Soo Suh under the direction of Editor Jae Weon Choi. The authors wish to express their thanks to Dr. A. Papachristodoulou and Dr. M. Peet for their helpful comments and suggestions. Mohammad Ali Badamchizadeh was born in Tabriz, Iran, in December 1975. He received the B.S. degree in Electrical Engineering from University of Tabriz in 1998 and the M.Sc. degree in Control Engineering from University of Tabriz in 2001. He received the Ph.D. degree in Control Engineering from University of Tabriz in 2007. He is now an Assistant Professor in the Faculty of Electrical and Computer Engineering at University of Tabriz. His research interests include Hybrid dynamical systems, Stability of systems, Time delay systems, Robot path planning. Sohrab Khanmohammadi received the B.S. degree in Industrial Engineering from Sharif University, Iran in 1977 and the M.Sc. degree in Automatic from University Paul Sabatie, France in 1980 and the Ph.D. degree in Automatic from National University, ENSAE, France in 1983. He is now a Professor of Electrical Engineering at University of Tabriz. His research interests are Fuzzy control, Artificial Intelligence applications in control and simulation on industrial systems and human behavior. Gasem Alizadeh was born in Tabriz, Iran in 1967. He received the B.S. degree in Electrical Engineering from Sharif University, Iran in 1990 and the M.Sc. degree from Khajeh Nasir Toosi University, Iran in 1993 and the Ph.D. degree in Electrical Engineering from Tarbiat Modarres University, Iran in 1998. From 1998, he is a Member of University of Tabriz in Iran. His research interests are robust and optimal control, guidance, navigation and adaptive control. Ali Aghagolzadeh was born in Babol, Iran. He received the B.S. degree in Electrical Engineering in 1985 from University of Tabriz, Tabriz, Iran, and the M.Sc. degree in Electrical Engineering in 1988 from the Illinois Institute of Technology, Chicago, IL. He also attended the School of Electrical Engineering at Purdue University in August 1998 where he was also employed as a part-time research assistant and received the Ph.D. degree in 1991. He is currently an Associate Professor of Electrical Engineering at University of Tabriz, Tabriz, Iran. His research interests include digital signal and image processing, image coding and communication, computer vision, and image analysis.     

Copper/copper oxide nanoparticles synthesis using Stachys lavandulifolia and its antibacterial activity

Nanoparticles of copper/cuprous oxide (Cu/Cu₂ O) were successfully synthesised by a green chemistry route. The synthesis process was carried out using an extract of Stachys lavandulifolia as both reducing and capping agents with a facile procedure. The nanoparticles were characterised by different techniques including X‐ray diffraction, indicating that the synthesised sample comprised both copper and cuprous oxide entity. The nanoparticles had a mean size of 80 nm and represented an impressive bactericidal effect on Pseudomonas aeruginosa.Inspec keywords: copper, copper compounds, nanoparticles, nanofabrication, nanomedicine, antibacterial activity, X‐ray diffractionOther keywords: nanoparticles synthesis, Stachys lavandulifolia, antibacterial activity, green chemistry route, reducing agents, capping agents, X‐ray diffraction, bactericidal effect, Pseudomonas aeruginosa, Cu‐Cu₂ O     

A soft robotics nonlinear hybrid position/force control for tendon driven catheters

Minimally invasive steerable catheters, commonly implemented in cardiac ablation, are currently operated by interventionalists exposing them to X-ray radiation and requiring the dexterity for accurate steering. To conduct robot-assisted cardiac ablation, highly accurate stable control platform for precise force/position control on the moving tissue is required. This paper introduces hybrid force/position control strategy to apply a constant force to the cardiac tissue while tracking the desired trajectory. The position controller is based on a nonlinear model predictive tracking control satisfying the input constraints. Cosserat rod theory is incorporated for the distal shaft modeling of tendon-driven catheters, and the model is reformulated for controller design and stability proof. Lyapunov-based stability analysis is conducted. To apply the controller, the force-displacement mapping of the cardiac tissue is obtained through ex vivo experimental tests. The performance of the controller is evaluated, and the catheter is capable of regulating the force with the RMSE of 4.9 mN and tracking the position with the RMSE of 0.89 mm. The promising results verify the potential of the application of the introduced approach in real applications including in vitro and clinical cardiac ablation.