The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Herein we report on the synthesis of a metastable (Cr,Y)₂AlC MAX phase solid solution by co-sputtering from a composite Cr–Al–C and elemental Y target, at room temperature, followed by annealing. However, direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room-temperature depositions, followed by annealing to 760°C led to the formation of phase pure (Cr,Y)₂AlC by diffusion. Higher annealing temperatures caused a decomposition of the metastable phase into Cr₂AlC, Y₅Al₃, and Cr-carbides. In contrast to pure Cr₂AlC, the Y-containing phase crystallizes directly in the MAX phase structure instead of first forming a disordered solid solution. Furthermore, the crystallization temperature was shown to be Y-content dependent and was increased by ∼200°C for 5 at.% Y compared to Cr₂AlC. Calculations predicting the metastable phase formation of (Cr,Y)₂AlC and its decomposition are in excellent agreement with the experimental findings.     

Reproducibility of peak expiratory flow measurements

The ease of PEF measurement and the availability of inexpensive, portable instruments have led to its increasing use. However, relatively little literature exists addressing the testing procedure, optimal frequency, instrument precision, and virtually no epidemiologic literature exists describing the variability of repeated PEF tests within a single test session (reproducibility). A summary of data from one of the authors' own worker population studies is presented which addresses precision of PEF measurement.     

Evaluation of injection augmentation treatment of hyaluronic acid based materials on rabbit vocal folds viscoelasticity

The viscoelastic properties of vocal folds after injection of hyaluronic acid (hyaluronan, HA) based materials have been studied in an animal model (rabbit) six months after injection. The results indicate that the viscoelastic properties of the vocal folds injected with the HA based materials are similar to the healthy vocal folds (non-injected samples) used as control. Histological analysis has been also performed to investigate on the fate of the injected materials after six months from the implant. The HA based materials remain up to six months and they recruited fibroblasts that induce the ingrowth of new connective tissue resulting in an endogenous soft tissue augmentation. The HA based compounds are good candidate for further studies aimed at restoring/preserving the vibratory capacity of the vocal folds with injection treatment in glottal insufficiency     

Control of a distillation column using self-tuning regulators

Self-tuning regulators were applied to the multivariable control of a pilot distillation unit. Both the top and the bottom product compositions were simultaneously controlled. The multivariable interactions were compensated for by different strategies. It was shown that a proper choice of the control variables made it possible to use a regulator with a smaller number of parameters. The evaluation of the results shows that the self-tuning regulator is a valuable tool in multivariable control of distillation columns.     

Marginal Abatement Cost Curves for Water Scarcity Mitigation under Uncertainty

Water Resources Management - As water scarcity and drought become more common, planning to avoid their consequences becomes crucial. Measures to prevent the impact of new climate conditions are...     

Trace metal speciation in brackish water using diffusive gradients in thin films and ultrafiltration: comparison of techniques

Diffusive gradients in thin films (DGT) and ultrafiltration were used to measure trace metal concentrations in the Baltic Sea. The results provide the first comparison of these two fundamentally different speciation methods for trace metals. Cd, Cu, Mn, Ni, and Zn were measured at two sites with different total trace metal concentrations. DGT units prepared with APA-gel as diffusive layer and Chelex 100 resin as binding agent were used throughout the study. The ultrafiltration was performed with Millipore Prep/Scale modules with cutoffs of 1 and 10 kDa. Concentration levels of Mn, Zn, and Cd measured by DGT agreed with the concentrations measured in 1 kDa ultrafiltered samples. For Cu and Ni the ultrafiltered concentrations exceeded the DGT-labile concentrations. The ability of DGT to preconcentrate metals was found to be an analytical advantage compared with ultrafiltration. DGT appears to be a good alternative to 1 kDa ultrafiltration for measurement of truly dissolved Mn, Cd, and Zn in the Baltic Sea.     

FEXPAC: a program for linear discriminant classification

A new program for feature extraction and two-class classification utilizing the Fisher linear discriminant function model has been developed. It is intended as a tool in multivariate data analysis, and is especially suited for the design and storage of linear classifiers from training data sets.     

Protein nutritional value of extrusion-cooked wheat flours

The effect of extrusion cooking on the protein nutritional value of wheat flour and whole-grain wheat flour was studied. Amino acid analysis showed lysine retention between 63 and 100%. The retention was positively affected by an increase in feed rate, and negatively by an increase in screw speed. The prominent lysine damage under severe conditions was probably due to formation of reducing carbohydrates through hydrolysis of starch. The loss of other amino acids was small. The BV of extruded wheat flours was significantly reduced in the products showing the most prominent lysine loss. However, no effect was seen in TD. In contrast, a decrease in BV of extruded whole-grain flour was accompanied by a significant reduction in TD. Extrusion cooking of wheat starch did not affect the nitrogen balance in rats given casein/starch diets containing raw or extruded starch.