Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Compression testing of a sintered Ti6Al4V powder compact for biomedical applications

In this study, the compression deformation behavior of a Ti6Al4V powder compact, prepared by the sintering of cold compacted atomized spherical particles (100–200 μm) and containing 36–38% porosity, was investigated at quasi-static (1.6×10⁻³–1.6×10⁻¹ s⁻¹) and high strain rates (300 and 900 s⁻¹) using, respectively, conventional mechanical testing and Split Hopkinson Pressure Bar techniques. Microscopic studies of as-received powder and sintered powder compact showed that sintering at high temperature (1200 °C) and subsequent slow rate of cooling in the furnace changed the microstructure of powder from the acicular alpha () to the Widmanstätten (+β) microstructure. In compression testing, at both quasi-static and high strain rates, the compact failed via shear bands formed along the diagonal axis, 45° to the loading direction. Increasing the strain rate was found to increase both the flow stress and compressive strength of the compact but it did not affect the critical strain for shear localization. Microscopic analyses of failed samples and deformed but not failed samples of the compact further showed that fracture occurred in a ductile (dimpled) mode consisting of void initiation and growth in phase and/or at the /β interface and macrocracking by void coalescence in the interparticle bond region.     

Edge cracks in a transversely isotropic hollow cylinder

The analytical solution for the linear elastic, axisymmetric problem of inner and outer edge cracks in a transversely isotropic infinitely long hollow cylinder is considered. The z = 0 plane on which the crack lies is a plane of symmetry. The loading is uniform crack surface pressure. The mixed boundary value problem is reduced to a singular integral equation where the unknown is the derivative of the crack surface displacement. An asymptotic analysis is done to derive the generalized Cauchy kernel associated with edge cracks. It is shown that the stress intensity factor is a function of three material parameters. The singular integral equation is solved numerically. Stress intensity factors are presented for various values of material and geometric parameters.     

Carboxymethyl sago pulp/chitosan hydrogel as an immobilization medium for activated sludge for p-nitrophenol biodegradation

In this study, carboxymethyl sago pulp (CMSP) derived from sago waste was successfully crosslinked with ferric ions in the presence of chitosan forming a novel immobilization matrix for p-nitrophenol (PNP)-acclimated activated sludge. On the basis of the shortest biodegradation time of PNP, the optimized operational conditions of immobilization were found to be: 7 w/v% CMSP, 9 g L⁻¹ of activated sludge, 0.1 M ferric ion, and 15 min of crosslinking time. Observable inhibited PNP biodegradation was exhibited by the suspended activated sludge at the initial PNP concentration of 400 mg L⁻¹. In contrast, complete mineralization was achieved by the CMSP/chitosan-immobilized activated sludge (CMSP/Ch-AS) beads. The results revealed the important role of CMSP/Ch hydrogel in protecting activated sludge from the toxicity of PNP. The CMSP/Ch-AS beads could be reused consecutively up to three and two cycles, respectively, for the biodegradation of PNP at 200 and 400 mg L⁻¹, with the attainment of more than 99% of PNP removal at each cycle. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47531.     

Stochastic resonance in binary composite hypothesis-testing problems in the Neyman–Pearson framework

Performance of some suboptimal detectors can be enhanced by adding independent noise to their inputs via the stochastic resonance (SR) effect. In this paper, the effects of SR are studied for binary composite hypothesis-testing problems. A Neyman–Pearson framework is considered, and the maximization of detection performance under a constraint on the maximum probability of false-alarm is studied. The detection performance is quantified in terms of the sum, the minimum, and the maximum of the detection probabilities corresponding to possible parameter values under the alternative hypothesis. Sufficient conditions under which detection performance can or cannot be improved are derived for each case. Also, statistical characterization of optimal additive noise is provided, and the resulting false-alarm probabilities and bounds on detection performance are investigated. In addition, optimization theoretic approaches to obtaining the probability distribution of optimal additive noise are discussed. Finally, a detection example is presented to investigate the theoretical results.     

Global optimization method for controlling a plant

A control system that contains a generic plant has been built. Its controller parameters have been designed by using a global search algorithm for a given plant, and its performance has been evaluated for the heat control of a thermal system, and the speed control of a DC motor. This paper explains this control system with a DC motor as its plant, the speed of which is controlled by the controller.     

Avoiding Change Orders in Public School Construction

Increased student enrollment and the current poor state of the educational infrastructure require the construction of more school buildings and the renovation of many of the existing ones. The large number and magnitude of change orders in these projects constitute an impediment to the rapid and economic delivery of these projects. A total of 6,585 change orders filed in a school district’s projects in the 5 1/2 year period from 1999 to 2004 were analyzed in five categories including owner-directed changes, code compliance issues, errors/omissions in contract documents, discovered or changed conditions, and others. The results of the study indicate that the dollar value of change orders relative to the original contract can be reduced if preventive measures are taken. These measures include choosing the right construction management firm, emphasizing the definition of project scope early in the project, and effectively managing the precontract activities by conducting value engineering and constructability reviews. The results indicate that school projects can be completed with change orders not exceeding 5% of the contract value if these measures are taken. This study is of relevance to practitioners involved in school design and construction projects.