Chitosan-based magnetic molecularly imprinted polymer: synthesis and application in selective recognition of tricyclazole from rice and water samples

A tricyclazole selective chitosan/Fe₃O₄ magnetic molecularly imprinted polymer (MMIP) was synthesized using non-covalent binding polymerization involving methacrylic acid (MAA) as functional monomer, divinylbenzene (DVB-80) as crosslinker, 2,2'-azobisisobutyronitrile as initiator, acetonitrile/toluene (75:25, v/v) as porogenic solvent and tricyclazole as template. Surface morphology and magnetic characterization of the prepared imprinted and non-imprinted polymers were done using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry and vibrating sample magnetometry, respectively. The adsorption kinetic data fitted best in pseudo-second-order model. The adsorption equilibrium was achieved in 30 min and the maximum binding capacity was 4579.9 µg/g. The Freundlich isotherm model was found suitable for explaining the binding isotherm data (R² > 0.99). Negative values of thermodynamic parameters ∆G (Gibb’s free energy), ∆H (enthalpy), and ∆S (entropy) revealed exothermic and spontaneous nature of adsorption processes. It also revealed decreased randomness at the solid–liquid interface during sorption. The scatchard plot analysis suggested heterogeneity of binding sites on MMIPs. The molecular recognition selectivity of MMIPs towards tricyclazole was much higher, as compared to its structural analogues, tebuconazole (α = 28.58) and hexaconazole (α = 37.16). The MMIPs were successfully applied to separate and enrich tricyclazole from fortified samples of rice and water, with a recovery percentage of 89.4% and 90.9%, respectively. These reusable imprinted polymers possessing high selectivity and specificity can be utilized as an adsorbent for solid-phase extraction in sample preparation for tricyclazole residue analysis in complex environmental matrices.

     

Extensive Study of Underlap Length Effect for 3-D SOI FinFET to Achieve High Switching Ratio and Low Power

Silicon - The primary purpose of this work is to study the effect of symmetric and asymmetric variation of underlap regions both on source and drain side of 3D SOI n-FinFET. Underlap length is...     

Harmony search algorithm for infinite impulse response system identification

In this paper, optimal sets of filter coefficients are searched by a meta-heuristic optimization technique called Harmony Search (HS) algorithm for infinite impulse response (IIR) system identification problem. For different optimization problems, HS algorithm undergoes three basic rules; namely Random Selection (RS), Harmony Memory Consideration (HMC), and Pitch Adjustment (PA) rules, which are inspired from the process that the musicians use to improvise a perfect state of harmony with the consummate skill of blending notes in tune. With the help of the properly selected control parameters, a perfect balance is achieved in exploration and exploitation in searching phases. The detailed analysis of simulation results emphasizes the strength of HS algorithm to find the near-global optimal solution, quality of convergence profile and the speed of convergence while tested against standard benchmark examples for same and reduced order models.     

Sand corrosion,thermal expansion,and ablation of medium- and high-entropy compositionally complex fluorite oxides

Sand corrosion, thermal expansion, and ablation properties of a new class of medium- and high-entropy compositionally complex fluorite oxides (CCFOs) are examined as potential protective coating materials. Five binary oxides were mixed and sintered into dense, single-phase CCFOs of the general formula: [Hf_(1-2x)/3Zr_(1-2x)/3Ce_(1-2x)/3Y_xYb_x]O_2-δ (x = 0.2, 0.074, and 0.029). These CCFOs exhibit decreased molten sand infiltration and interaction at intermediate temperatures (1200-1300°C) in comparison with a cubic yttria-stabilized zirconia (YSZ) reference; however, at higher temperatures, the trend is reversed due to the increased chemical reactivity. The equimolar high-entropy (Hf_0.2Zr_0.2Ce_0.2Y_0.2Yb_0.2)O_2-δ exhibits no grain boundary penetration by molten sand at all examined temperatures (1200°C-1500°C), although reaction and precipitation are significant. Moreover, these CCFOs exhibit higher intrinsic thermal expansion coefficients (CTE) than the YSZ reference, thereby being more compatible with Ni-based superalloys. The 8YSZ-like (Hf_0.284Zr_0.284Ce_0.284Y_0.074Yb_0.074)O_2-δ exhibits the highest CTE in this series of CCFOs due to oxygen clustering effects. Finally, these CCFOs also exhibit lower emissivities and form unique faceted microstructures in ablative environments.     

Adaptive broadcast by fault-tolerant spanning tree switching

Adaptation is a desirable requirement in a distributed system as it helps the system to perform efficiently under different environments. For many problems, more than one protocol exists, such that one protocol performs better in one environment while the other performs better in another. In such cases, adaptive distributed systems can be designed by dynamically switching between the protocols as the environment changes. Distributed protocol switching is also important for performance enhancement, or fault-tolerance of a distributed system. In this work, we illustrate distributed protocol switching by providing a distributed algorithm for adaptive broadcast that dynamically switches from a BFS tree to a DFS tree. The proposed switching algorithm can also handle arbitrary crash failures. It ensures that switching eventually terminates in spite of failures and the desired tree (DFS tree) results as the output. We also investigate the properties that can be guaranteed on the delivery of broadcast messages under specific failure conditions. We show that under no failure, each broadcast message is eventually correctly delivered to all the nodes in spite of switching. Under arbitrary crash fault, we ensure that switching eventually terminates with the desired tree as the broadcast topology. We also investigate the specific delivery guarantees that can be provided when a single crash fault happens, both during switching and when no switching is in progress.     

Application of evolutionary optimization techniques for finding the optimal set of concentric circular antenna array

In this paper the maximum sidelobe level (SLL) reductions, optimal beam patterns and optimal beam widths of various designs of three-ring planar concentric circular antenna arrays (PCCAA) are examined using three different classes of evolutionary optimization techniques to finally determine the global optimal three-ring PCCAA design and then establish some sort of ranking among the techniques. Apart from physical construction of a PCCAA, one may broadly classify its design into two major categories: uniformly excited arrays and non-uniformly excited arrays. The present paper assumes non-uniform excitations and uniform spacing of excitation elements in each three-ring PCCAA design and a design goal of maximizing SLL reduction associated with optimal beam patterns and beam widths. The design problem is modeled as an optimization problem for each PCCAA design and solved using different evolutionary optimization techniques to determine an optimum set of normalized excitation weights for PCCAA elements, which, when incorporated, results in a radiation pattern with optimal (maximum) SLL reduction. Among the various PCCAA designs, one which yields the global minimum SLL with global minimum first null beamwidth is the global optimal design. In this work the three-ring PCCAA containing (N₁ = 4, N₂ = 6, N₃ = 8) elements proves to be such global optimal design. The optimization techniques employed are real coded GA (RGA), canonical PSO (CPSO), craziness based PSO (CRPSO), evolutionary programming (BEP), hybrid evolutionary programming (HEP). While ranking the techniques after 30 total runs for each design, HEP, CRPSO, RGA, CPSO, BGA hold the first five ranks in order of optimization capability. HEP yields global minimum SLL (?32.86 dB) and global minimum BWFN (77.0°) for the optimal design. BEP often changes the rank from second to fifth depending on the design set. Further, when compared to a uniformly excited PCCAA having equal number of elements and same radii a reduction of major lobe beamwidth is also observed in the optimal non-uniformly excited case.     

Acrylic-ester-polyol based novel two-component polyurethane clear coat: Evaluation of performance characteristics

In the current study, a combination of acrylic polyol (AP) and ester polyol (EP) were synthesized and reacted at variable ratios with hexamethylene diisocyanates and isophorone diisocyanates to prepare a transparent two-component polyurethane (PU) coating formulation. The formations of the polyol system, isocyanate system, and the PU systems were confirmed by ¹H nuclear magnetic resonance and Fourier-transform infrared spectroscopy. Transparency of the coatings was examined using haze, and gloss measurement, which showed acrylic-ester-polyurethane (aePU-5 and aePU-6) have 91.5% and 91.8% transparency and gloss of 90.3 and 90.7 GU respectively. The thermal properties like T_g and the thermal stability of the coatings were verified using differential scanning calorimetry, and thermogravimetric analysis respectively which was found to increase with increasing EP content and decreasing AP content which may be ascribed to improved compatibility of copolymers, and homogeneity in PU along with enhanced crosslinking density. The degree of adhesion of coating with the substrate was validated from lap-shear, and cross-cut tape test which showed improved performance at AP:EP ratio of 60:40. The coatings were found to exhibit resistance toward pencil hardness with aePU-5 and aePU-6 having the optimum resistance of 9H. The surface morphology and topography were observed under scanning electron microscopy, and atomic force microscopy, respectively. The outcome confirms the higher smoothness of the surfaces subjected to the increase in EP content. The PU system with 40 wt% AP content and 60 wt% EP designated as aePU-5 was found to exhibit optimum performance.     

Topology Management Ensuring Reliability in Delay Sensitive Sensor Networks with Arbitrary Node Failures

The lifetime of a sensor network is influenced by the efficient utilization of the resource constrained sensor nodes. The tree-based data gathering offers good quality of service (QoS) for the running applications. However, data gathering at the sink reduces the network lifetime due to a fast failure of highly loaded nodes. Loss of connectivity and sensing coverage affect the performance of the applications that demand critical QoS. In this paper, a data gathering tree management scheme has been proposed to deal with arbitrary node failures in delay-sensitive sensor networks. A load-balanced distributed BFS tree construction procedure has been introduced for an efficient data gathering. Based on the initial tree construction, a tree maintenance scheme and an application message handler have been designed to ensure the reliable delivery of the application messages. The correctness of the proposed scheme has been verified both theoretically and with the help of simulation. The proposed scheme offers low overhead, enhanced network lifetime and good QoS in terms of delay and reliability of the application messages.     

Polyacrylonitrile solution homogeneity study by dynamic shear rheology and the effect on the carbon fiber tensile strength

Poly(acrylonitrile‐co‐methacrylic acid) (PAN‐co‐MAA)/N,N‐dimethylformamide (DMF) solutions were prepared and dynamic shear rheology of these solutions were investigated. With increasing stirring time up to 72 h at 70°C, the polymer solution became less elastic (more liquid‐like) with a ～60% reduction in the zero‐shear viscosity. Relaxation spectra of the PAN‐co‐MAA/DMF solutions yield a decrease in relaxation time (disentanglement time, τ_d), corresponding to an about 8% decrease in viscosity average molecular weight. The log‐log plot of G′ (storage modulus) versus G″ (loss modulus) exhibited an increase in slope as a function of stirring time, suggesting that the molecular level solution homogeneity increased. In order to study the effect of solution homogeneity on the resulting carbon fiber tensile strength, multiple PAN‐co‐MAA/DMF solutions were prepared, and the precursor fibers were processed using gel‐spinning, followed by continuous stabilization and carbonization. The rheological properties of each solution were also measured and correlated with the tensile strength values of the carbon fibers. It was observed that with increasing the slope of the G′ versus G″ log‐log plot from 1.471 to 1.552, and reducing interfilament fiber friction during precursor fiber drawing through the addition of a fiber washing step prior to fiber drawing, the carbon fiber strength was improved (from 3.7 to 5.8 GPa). This suggests that along with precursor fiber manufacturing and carbonization, the solution homogeneity is also very important to obtain high strength carbon fiber. POLYM. ENG. SCI., 56:361–370, 2016. © 2016 Society of Plastics Engineers     

Solid‐state NMR study of spin finish of thermally treated PAN and PAN/CNT precursor fibers

Dry‐jet wet‐spun polyacrylonitrile (PAN) and PAN/carbon nanotubes (CNTs) precursor fibers coated by spin finishes were characterized using the solid‐state ¹H nuclear magnetic resonance technique. Series of fiber samples were prepared upon thermal treatment at different temperatures (room temperature to 180°C). Using the Hahn echo sequence, relatively mobile components were identified and the effect of the heat treatment on those components was studied. It was observed that the mobile components are mainly the spin finishes. Heat treatment caused loss of one of the spin finishes (Type B) to a great extent (～80%), whereas the other two spin finishes (Type A and Type C) were more stable. Additional information regarding the change in molecular mobility due to heat treatment was obtained by the spin‐lattice relaxation time ( T₁ ) analysis. It was found that the presence of CNT affects the T₁ relaxation time of the polymer in the composite fiber, however, that of relatively mobile components remains unaffected. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40734.