Polymer derived ceramic materials from Si,B and MoSiB filler-loaded perhydropolysilazane precursor for oxidation protection

Silica-based coating systems were developed using polymer derived ceramics (PDCs) technology. Ceramic composites on the base of a SiO₂ and SiNO matrix and homogeneously distributed Mo₅SiB₂, SiB₆, Si and B fillers were manufactured. The coating systems have low porosity and provide a high oxidation resistance up to 100 h at 800 °C and 1100 °C in air. The influence of temperature and atmosphere of pyrolysis on the polymer precursor, the volume fraction of filler materials on the chemical composition of compacts as well as their high-temperature oxidation protection was investigated.     

Effect of complexation of oxidised corn starch with mineral elements on physicochemical properties

The objective of this study was to determine the effect of complexation of oxidised starch with mineral elements on its physicochemical properties. Corn starch was oxidised with sodium hypochlorite and, afterwards, modified with ions of potassium, magnesium and iron. Thus, native and modified starches were analysed for: contents of mineral elements, colour parameters (L*a*b*), water binding capacity and solubility in water at temperature of 60 and 80 °C. Thermodynamic characteristics of gelatinisation by DSC, molecular weight distribution by GPC, intrinsic viscosity and pasting properties by RVA were studied. The efficiency of incorporation of metal ions into oxidised corn starch was about 30%, 20% and 20% for potassium, magnesium and iron ions, respectively. The complexation with potassium ions caused the greatest changes in the molecular weight distribution and the intrinsic viscosity of starches and viscosity of starch pastes. Only modification of starch with iron ions affected the colour parameters of the starch. Incorporation of metal ions into starch resulted also in changes in its water binding capacity and solubility in water.     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Synthesis of Self-Healing Bio-Based Tannic Acid-Based Methacrylates By Thermoreversible Diels–Alder Reaction

This investigation reports the effective use of the Diels–Alder (DA) click reaction in the preparation of self-healing bio-based dendritic methacrylates having reactive furfuryl functionality. Bio-based methacrylates were synthesized by modifying tannic acid with glycidyl methacrylate and furfuryl functionality was introduced by atom transfer radical polymerization with varied amount of furfuryl methacrylate monomer. The thermoreversible network was successfully achieved by DA and retro-DA reaction between the furfuryl groups and a bifunctional maleimide crosslinker, bismaleimide. This process was studied by nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and solvent exposure tests. Differential scanning calorimetry analysis was used to determine the endothermic retro-DA reaction in the DA adduct. The self-healing property of the above crosslinked material was demonstrated by monitoring the repair of a scratch in the polymer film upon heating and cooling. This was analyzed by scanning electron microscopy. POLYM. ENG. SCI., 60:140–150, 2020. © 2019 Society of Plastics Engineers     

Purification of the cardiac sarcoplasmic reticulum membrane protein phospholamban from recombinant Escherichia coli

Phospholamban (PLN) was expressed in Escherichia coli as a protein fusion with glutathione S-transferase (GST). GST-PLN was mostly present in the insoluble protein fraction and accounted for approximately 50% of total insoluble protein. Attempts to suppress inclusion body formation or to use GST as an affinity-purification tag failed. A successful purification method is based on preparative SDS/PAGE and electrodialysis. From 1 g cells we typically purified 13.5 mg fusion protein with a PLN content of 2.8 mg. We genetically inserted an enterokinase (EK) protease site just in front of the PLN sequence and demonstrated the proteolytical liberation of PLN from the carrier protein. The approach described represents a substantial advancement in PLN expression and purification.     

An artificial neural network approach on parametric optimization of laser micro-machining of die-steel

In the present research, laser micro machining (LMM) of tungsten-molybdenum general purpose high speed steel (Rex M2) has been studied. Selection of optimum machining parameter combinations for obtaining higher depth of groove and smaller height of recast layer is a challenging task in LMM due to the presence of a large number of process variables. There is no perfect combination of parameters which can simultaneously result in both the highest depth of groove and lowest height of recast layer. This paper presents an attempt to develop a strategy for predicting the optimum machining parameter setting for the generation of the maximum depth of groove with minimum height of recast layer. A feed forward back-propagation neural network has been developed to model the machining process. The model, after proper training, is capable of predicting the response parameters as a function of four different control parameters. Experimental results demonstrate that the machining model is suitable and the optimization strategy satisfies practical requirements. The developed model has been found to be quite unique, powerful and flexible.     

Potency comparison of peptidomimetic inhibitors against HIV-1 and HIV-2 proteinases: design of equipotent lead compounds

The results of investigation of haptoglobin (Hp) types in 596 donor blood samples in some towns of Ukraine (Dnepropetrovsk, Kharkov, Odessa, Kiev, Uzhgorod, Zhitomir) are presented. Three normal Hp types (Hp1-1, Hp2-1 and Hp2-2) have been found. The reliable interpopulation differences in the Hp types frequency were not found. On the whole the Hp types frequency in the type Hp1-1 comprised 12.7%. In the type Hp2-1-48.1% and in the type Hp2-2-36.5%. The frequency of the gene Hp1 is 0.38. The frequency of the Hp types and of the gene Hpl in Ukraine is similar to that in population of Eastern Europe and European Part of Russia.     

Decreased levels of a soluble form of the human adhesion receptor CD58 (LFA-3) in sera and synovial fluids of patients with rheumatoid arthritis

The mode of interaction between muramyl dipeptide (MDP), a compound with immunopharmacological activities, and 5-hydroxtryptamine (5-HT, serotonin) was studied in isolated nerve-smooth muscle preparations of the carp stomach. Application of exogenous 5-HT evoked direct smooth muscle contractions; electric neurogenic stimulation evoked twitches due to release of 5-HT from nerve endings. Contractions evoked by a high concentration of 5-HT (3-30 microM) were resistant to atropine and potentiated in the presence of MDP. Isamoltan (5-HTID antagonist) decreased the amplitude of contractions, whereas ketanserin (5-HT2 antagonist) and MDL 72,222 (5-HT3 antagonist) had no effect. The addition of low concentrations (0.1-1.5 microM) of 5-HT did not contract the preparation but caused a decrease in the amplitude of neurogenic twitches, which might be due to the presynaptic inhibition of serotonin release. This effect of 5-HT was not changed by isamoltan or ketanserin, but it was largely reduced in the presence of 5-HT3 antagonists tropisetron and MDL 72,222. This inhibitory effect of 5-HT on twitch amplitude was potentiated by MDP. The interaction of MDP with the serotonergic system thus involved not only potentiation of the postsynaptic effect of higher 5-HT concentrations, which might have been mediated via the 5-HT1 subsystem, but also presynaptic inhibition. MDP enhancement of 5-HT's inhibitory effect, mediated via 5-HT3 receptors, might represent a new feature in mutual 5-HT-MDP interactions.