Studies on syntheses and permeabilities of special polymer membranes. XVI. Permeation and separation characteristics of aqueous polymer solutions for acrylonitrile-styrene copolymer membranes

The permeation and separation characteristics of aqueous polymer solutions using acrylonitrile-styrene copolymer membranes were investigated under various conditions. The membranes obtained from dimethyl sulfoxide solution of acrylonitrile-styrene copolymer have not a sufficient reproducibility and stability of permeation. These lacks were improved by adding ethylene glycol or glycerol to the casting solution and treating the membranes with pressure. The permeation and separation characteristics were influenced significantly by the additional amount of above additives, the heat treatment temperature, and the operating pressure. It was found that the concentration polarization of poly(vinyl alcohol) molecules onto the surface of the acrylonitrile-styrene copolymer membranes is smaller than that onto hydrophilic polymer membranes such as membranes of cellulose acetate, cellulose nitrate, and nylon 12, etc. Moreover, the acrylonitrile-styrene copolymer membranes show better performance for separation and concentrating of aqueous polymer solutions than hydrophilic membranes.     

A Hemispherical Image Sensor Array Fabricated with Organic Photomemory Transistors

Hemispherical image sensors simplify lens designs, reduce optical aberrations, and improve image resolution for compact wide-field-of-view cameras. To achieve hemispherical image sensors, organic materials are promising candidates due to the following advantages: tunability of optoelectronic/spectral response and low-temperature low-cost processes. Here, a photolithographic process is developed to prepare a hemispherical image sensor array using organic thin film photomemory transistors with a density of 308 pixels per square centimeter. This design includes only one photomemory transistor as a single active pixel, in contrast to the conventional pixel architecture, consisting of select/readout/reset transistors and a photodiode. The organic photomemory transistor, comprising light-sensitive organic semiconductor and charge-trapping dielectric, is able to achieve a linear photoresponse (light intensity range, from 1 to 50 W m⁻²), along with a responsivity as high as 1.6 A W⁻¹ (wavelength = 465 nm) for a dark current of 0.24 A m⁻² (drain voltage = −1.5 V). These observed values represent the best responsivity for similar dark currents among all the reported hemispherical image sensor arrays to date. A transfer method was further developed that does not damage organic materials for hemispherical organic photomemory transistor arrays. These developed techniques are scalable and are amenable for other high-resolution 3D organic semiconductor devices.     

Evaluation of MPN method combined with PCR procedure for detection and enumeration of Vibrio parahaemolyticus in seafood

Vibrio parahaemolyticus densities in spiked and naturally contaminated seafood samples were enumerated by the MPN method combined with a PCR procedure (MPN-PCR method) targeting the species-specific thermolabile hemolysin gene (tlh), and by the MPN method using subcultivation of alkaline-peptone-water (APW) enrichment culture on thiosulfate-citrate-bile-sucrose (TCBS) agar (MPN-TCBS method). In the samples spiked with both V. parahaemolyticus and V. alginolyticus, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were similar to, or higher than the numbers of spiked cells, whereas those enumerated by the MPN-TCBS method were below the numbers of spiked cells. In naturally contaminated seafood samples, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were higher than those by the MPN-TCBS method. In the case of the MPN-TCBS method, isolation of V. parahaemolyticus from some APW cultures was difficult because of the overgrowth of many colonies other than V. parahaemolyticus (e.g., V. alginolyticus) on TCBS agar. In contrast, the PCR technique could detect tlh from APW culture without isolation of V. parahaemolyticus, so the possibility of failing to obtain a positive result in APW culture by the MPN-PCR method was considered to be lower than that by the MPN-TCBS method. Furthermore, utilization of the PCR technique reduces the time and labor required for the biochemical identification tests used in the MPN-TCBS method. For the detection and enumeration of V. parahaemolyticus in seafood, especially for samples that show many colonies other than V. parahaemolyticus on TCBS agar, the MPN-PCR method may be more convenient and reliable than the MPN-TCBS method.     

Integrated protocol for optimized link state routing and localization: OLSR-L

Localization protocol is important for estimating node positions in a wireless multi-hop network. Routing protocol is also important for controlling paths. In previous research, localization and routing protocols have been discussed and evaluated separately. In this paper, we propose an integrated protocol for optimized link state routing (OLSR) and OLSR based localization (ROULA). Our protocol enables simultaneous localization and routing. ROULA’s localization is performed using OLSR overhead such as hello packets and routing tables. The routing overheads and the processing procedures can be efficiently integrated. We demonstrate that the integrated protocol for ROULA and OLSR enables simultaneous localization and routing.     

Study of charge storage behavior in metal-alumina-silicon dioxide-silicon(MAOS) field effect transistor

The basic characteristics and charge storage behavior of metal-alumina-silicon dioxide-silicon(MAOS) field effect transistors have been investigated as a function of the oxide thickness. The typical charge storage behaviors have also been measured on devices with SiO₂ films of 50 Å and Al₂O₃ films of 700 Å and the results are interpreted in terms of electron and hole transport processes across thin SiO₂ layer and electron injection from Al electrode by tunneling mechanism. In the MAOS structure, the shift of threshold voltage from initial state is within about 23 V and can be reversibly controlled, more than 10⁶-times at least, by alternate electric fields under suitable stressing condition. It is considered that the charge storage time is practically infinite at room temperature and of the order of 10⁶ hr at 150°C. The failure behaviors of device parameters under the repeated field stressing and cycles can be also accounted for in terms of electron accumulation within Al₂O₃ films and at interfaces between Al₂O₃ and SiO₂ films.     

Ultra-thin high-density LSI packaging substrate for advanced CSPs and SiPs

An ultra-thin high-density LSI packaging substrate, called multi-layer thin substrate (MLTS), is described. It meets the demand for chip scale packages (CSPs) and systems in a package (SiPs) for use in recently developed small portable applications with multiple functions. A high-density build-up structure is fabricated on a Cu plate, which is then removed, leaving only an ultra-thin, high-density multi-layer substrate. MLTS has (1) excellent registration accuracy, which enables higher density and finer pitch patterning due to the use of a rigid, excellent-flatness Cu base plate; (2) a thinner multi-layer structure due to the use of a core-less multi-layer structure; (3) excellent reliability, supported by the use of an aramid-reinforced epoxy resin dielectric layer; and (4) a cost-effective design due to the use of fewer layers fabricated using a conventional build-up process. A prototype high-density CSP (0.4-mm pitch/288 pins/4 rows/10 mm²) was fabricated using a 90-μm-thick MLTS (with a solder resist layer). Testing demonstrated that it had excellent long-term reliability. A prototype ultra-thin, high-density SiP (0.5-mm pitch/225 pins/11 mm²/0.93 mm thick) was also fabricated based on MLTS. MLTS consists of only two conductor layers (total thickness: 90 μm) while an identical-function build-up printed wiring board needs four conductor layers (total thickness: 300 μm). With its thinner core-less multi-layer structure, MLTS enables the fabrication of ultra-thin, high-density SiPs.     

Taming Charge Transport in Semiconducting Polymers with Branched Alkyl Side Chains

The solid‐state packing and polymer orientation relative to the substrate are key properties to control in order to achieve high charge carrier mobilities in organic field effect transistors (OFET). Intuitively, shorter side chains are expected to yield higher charge carrier mobilities because of a denser solid state packing motif and a higher ratio of charge transport moieties. However our findings suggest that the polymer chain orientation plays a crucial role in high‐performing diketopyrrolopyrrole‐based polymers. By synthesizing a series of DPP‐based polymers with different branched alkyl side chain lengths, it is shown that the polymer orientation depends on the branched alkyl chain lengths and that the highest carrier mobilities are obtained only if the polymer adopts a mixed face‐on/edge‐on orientation, which allows the formation of 3D carrier channels in an otherwise edge‐on‐oriented polymer chain network. Time‐of‐flight measurements performed on the various polymer films support this hypothesis by showing higher out‐of‐plane carrier mobilities for the partially face‐on‐oriented polymers. Additionally, a favorable morphology is mimicked by blending a face‐on polymer into an exclusively edge‐on oriented polymer, resulting in higher charge carrier mobilities and opening up a new avenue for the fabrication of high performing OFET devices.     

Levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene-positive organisms in retail seafood determined by the most probable number-polymerase chain reaction (MPN-PCR) method

The incidence and levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene (tdh)-positive organisms in retail seafood were determined. The most probable number-polymerase chain reaction (MPN-PCR) method using a PCR procedure targeting the species-specific thermolabile hemolysin gene (tlh) and tdh was used to determine the levels of V. parahaemolyticus and tdh-positive organisms, respectively. In seafood for raw consumption, V. parahaemolyticus was found in four (13.3%) of 30 fish samples, 11 (55.0%) of 20 crustacean samples, and 29 (96.7%) of 30 mollusc samples. Levels of V. parahaemolyticus were below 10(4) MPN/100 g in all fish and crustacean samples tested. However, they were above 10(4) MPN/100 g in 11 (36.7%) of the 30 mollusc samples. In all seafood for raw consumption, the level of tdh-positive organisms was below the limit of detection (< 30 MPN/100 g). In seafood for cooking, V. parahaemolyticus was found in 15 (75.0%) of 20 fish samples, nine (45.0%) of 20 crustacean sample, and 20 (100%) of 20 mollusc samples. Levels of V. parahaemolyticus were above 10(4) MPN/100 g in only three (15.0%) and one (5.0%) of the 20 fish and 20 crustacean samples, respectively. However, they were above 10(4) MPN/100 g in 18 (90.0%) of the 20 mollusc samples. In seven (35.0%) of the 20 mollusc samples, tdh-positive organisms were found and their levels ranged from 3.6x10 to 1.1 x 103 MPN/100 g. From four of seven tdhpositive samples, tdh-positive V. parahaemolyticus was isolated.