Shock consolidation of diamond powders

Fine and coarse diamond powders were shock-compacted at peak pressures of 77, 90, and 108 GPa. The densification and consolidation mechanisms of diamond powders under shock compression were investigated. The densification behaviour of the diamond powders depended strongly on the particle size of the starting materials. Fine diamond powders were densified primarily by plastic deformation, while coarse diamond powders were densified mainly by particle fracture. The relative densities of the compacted diamond samples increased with an increase in the initial particle size of the diamond and with shock pressure. The consolidation mechanism of the diamond powders under shock compression was closely related to the densification mechanism, and depended on the initial particle size of the diamond. At a shock pressure of 90 GPa, particle sizes of 2 to 4 m grade and 10 to 20 m grade were desirable as the starting material in order to produce well-bonded diamond compacts. Diamond compacts having microhardness values over 80 GPa were obtained from 2 to 4 m grade and 10 to 20 m grade diamond powders at a shock pressure of 90 G Pa, and their relative densities were 88.5% and 91.0%, respectively.     

Catalysis of gasification of coal-derived cokes and chars

Calcium is the most important in-situ catalyst for gasification of US coal chars in O₂, CO₂ and H₂O. It is a poor catalyst for gasification of chars by H₂. Potassium and sodium added to low-rank coals by ion exchange and high-rank coals by impregnation are excellent catalysts for char gasification in O₂, CO₂ and H₂O. Carbon monoxide inhibits catalysis of the CH₂O reaction by calcium, potassium and sodium; H₂ inhibits catalysis by calcium. Thus injection of synthesis gas into the gasifier will inhibit the CH₂O reaction. Iron is not an important catalyst for the gasification of chars in O₂, CO₂ and H₂O, because it is invariably in the oxidized state. Carbon monoxide disproportionates to deposit carbon from a dry synthesis gas mixture (3 vol H₂ + 1 vol CO) over potassium-, sodium- and iron-loaded lignite char and a raw bituminous coal char, high in pyrite, at 1123 K and 0.1 MPa pressure. The carbon is highly reactive, with the injection of 2.7 kPa H₂O to the synthesis gas resulting in net carbon gasification. The effect of traces of sulphur in the gas stream on catalysis of gasification or carbon-forming reactions by calcium, potassium, or sodium is not well understood at present. Traces of sulphur do, however, inhibit catalysis by iron.     

Allelopathic Effects of Volatile Monoterpenoids Produced by <Emphasis Type="Italic">Salvia leucophylla</Emphasis>: Inhibition of Cell Proliferation and DNA Synthesis in the Root Apical Meristem of <Emphasis Type="Italic">Brassica campestris</Emphasis> Seedlings

Salvia leucophylla, a shrub observed in coastal south California, produces several volatile monoterpenoids (camphor, 1,8-cineole, -pinene, -pinene, and camphene) that potentially act as allelochemicals. The effects of these were examined using Brassica campestris as the test plant. Camphor, 1,8-cineole, and -pinene inhibited germination of B. campestris seeds at high concentrations, whereas -pinene and camphene did not. Root growth was inhibited by all five monoterpenoids in a dose-dependent manner, but hypocotyl growth was largely unaffected. The monoterpenoids did not alter the sizes of matured cells in either hypocotyls or roots, indicating that cell expansion is relatively insensitive to these compounds. They did not decrease the mitotic index in the shoot apical region, but specifically lowered mitotic index in the root apical meristem. Moreover, morphological and biochemical analyses on the incorporation of 5-bromo-2-deoxyuridine into DNA demonstrated that the monoterpenoids inhibit both cell-nuclear and organelle DNA synthesis in the root apical meristem. These results suggest that the monoterpenoids produced by S. leucophylla could interfere with the growth of other plants in its vicinity through inhibition of cell proliferation in the root apical meristem.     

Effects of growth temperature on the fatty acid composition of the free-living nematodeCaenorhabditis elegans

The effects of growth temperature on the fatty acid compositions of the phosphatidylcholine (PC), phosphatidylethanolamine (PE), and total lipid (TL) fractions of the free-living nematodeCaenorhabditis elegans were investigated. A reduction in growth temperature from 25 to 15°C caused the proportions of eicosapentaenoic acid (20∶5n-3) to increase from 23.6 to 32.5% in the PC, from 7.4 to 10.8% in the PE, and from 12.9 to 19.9% in the TL fractions. Conversely, the levels of dihomo-γ-linolenic acid (20∶3n-6) and arachidonic acid (20∶4n-6) in these phospholipid fractions and the TL fraction both decreased with decreasing growth temperature. Analysis of the positional distribution of fatty acids in the PC fraction revealed that the change in the composition of C₂₀ polyunsaturated fatty acid was obvious in positionsn-2. Lowering the growth temperature induced an increase in the level of the diacyl subclass of PE from 58% at 25°C to 71% at 15°C, with a concomitant decrease in the levels of the alkylacyl and alkenylacyl subclass of PE ofC. elegans. These changes observed in the phospholipids ofC. elegans might be one mechanism for adaptation to low temperature. Lipids 31, 1173–1178 (1996).     

Evaluation of environmentally friendly lubricants for cold forging

The authors proposed double-layer-type environmentally friendly lubricants, which were composed of an undercoat, superior in adhering to a material, and an overcoat, superior in reducing the friction between the material and the die. The performance of these lubricants for cold forging was evaluated by the ring compression test, the combined forward rod-backward can extrusion-type friction test and the combined forward conical can-backward straight can extrusion-type friction test. The double-layer-type lubricants showed comparable friction characteristics and anti-pick-up properties to a conversion coating lubricant, when the film thickness and surface treatment before coating were improved. In a practical application by cold multistage forging, the double-layer-type lubricants showed a similar performance to a conversion coating lubricant.     

Decay of material properties of degraded MEA caused by repeated cold starts under subzero conditions in polymer electrolyte fuel cells

This study investigated the characteristics of cell performance degradation, decline of component performance, and changes in the properties of membrane electrode assembly materials caused by repeated cold starts under a subzero condition of ?30 °C. It was made clear that functional decay appeared mainly at the cathode due to increased proton conductive impedance and reduction of reactivity of the electrode catalyst. Among the cathode components, an increase in proton conductive impedance in the cathode electrolyte was dominant. Furthermore, the application of ion chromatography and a newly developed proton‐induced gamma‐ray emission method to measure fluorine in the off‐gas drain revealed that decomposition of the electrolyte was dominant in the cathode catalyst layer. A decrease in fluorine in the cathode electrolyte measured by fluorine‐19 nuclear magnetic resonance confirmed this decomposition. A hypothesis is also presented concerning the cause of the performance degradation. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20394     

Genetically engineered active Qbeta replicase in rabbit reticulocyte cell-free system: a fusion protein of EF-Tu and EF-Ts is functional as the subunit of Qbeta replicase

Qbeta replicase functioning in Escherichia coli is an RNA-dependent RNA polymerase composed of one phage-coded subunit and three host-coded proteins: ribosomal protein S1, and protein elongation factors EF-Tu and EF-Ts. Qbeta replicase lacking ribosomal protein S1 (alpha-less replicase) is capable of replicating some small RNAs. We attempted to create functional alpha-less replicase by co-expression of the mRNAs that code for the subunits of alpha-less replicase in a rabbit reticulocyte cell-free translation system. Replicase activity, however, could not be detected when both EF-Tu and EF-Ts were co-expressed with the phage-coded subunit. On the other hand, active alpha-less replicase was obtained when an EF-Ts-EF-Tu fusion protein was co-expressed with the phage-coded subunit. Consequently, we succeeded in generating genetically engineered active alpha-less Qbeta replicase which functions in a eukaryotic cell-free system.     

Minimum chemical requirements for adhesin activity of the acid-stable part of Candida albicans cell wall phosphomannoprotein complex

This study was conducted to define adhesive characteristics of the acid-stable moiety of the Candida albicans phosphomannoprotein complex (PMPC) on adherence of this fungus to marginal zone macrophages of the mouse spleen. Complete digestion of the acid-stable moiety (Fr.IIS) of the C. albicans PMPC with an alpha-mannosidase or hydrolysis with 0.6 N sulfuric acid destroyed adhesin activity, as determined by the inability of the soluble digests to inhibit yeast cell adherence to the splenic marginal zone. Fr.IIS adhesin activity was decreased following digestion with an alpha-1,2-specific mannosidase. Oligomannosyls consisting of one to six mannose units, which were isolated from the acid-stable part of the PMPC, did not inhibit yeast cell binding and thus do not function alone as adhesin sites in the PMPC. To gain more insight into the minimum requirements for adhesin activity, PMPCs were isolated from a Saccharomyces cerevisiae wild-type strain and from mutant strains mnn1, mnn2, and mnn4; the PMPCs were designated scwt/Fr.II, scmn1/Fr.II, scmn2/Fr.II, and scmn4/Fr.II, respectively. S. cerevisiae scmn2/Fr.II lacks oligomannosyl side chain branches from the outer core mannan, and scmn2/Fr.II was the only PMPC without adhesin activity. S. cerevisiae scwt/Fr.II, scmn1/Fr.II, and scmn4/Fr.II showed adhesin activities less than that of C. albicans Fr.II. These three S. cerevisiae PMPCs are generally similar to Fr. IIS, except that the S. cerevisiae structure has fewer and shorter side chains. Immunofluorescence microscopy show that the acid-stable part of the PMPC is displayed homogeneously on the C. albicans yeast cell surface, which would be expected for a surface adhesin. Our results indicate that both the mannan core and the oligomannosyl side chains are responsible for the adhesin activity of the acid-stable part of the PMPC.     

Effects of age and sex on sodium chloride sensitivity: association with plasma renin activity

The mechanism by which excessive NaCl intake raises blood pressure has not been fully clarified. The present study was undertaken in 87 Japanese inpatients with essential hypertension to investigate the interrelation among effects of age, sex and the renin-angiotensin system on NaCl sensitivity. After ingesting a regular NaCl diet (170 mmol/day) for one week, subjects were placed sequentially on a week of low NaCl diet (50 mmol/day) and a week of high NaCl diet (340 mmol/day). NaCl sensitivity defined as the difference in mean blood pressure between the low and high NaCl diets did not differ between genders. NaCl sensitivity was positively correlated with age and the change in PRA. The fall in PRA after NaCl loading was significantly smaller in women than in men. By multiple regression analysis, age and the change in PRA independently contributed to the change in mean blood pressure. Furthermore, the interaction between sex and the change in PRA was selected as a statistically significant variable. In conclusion, NaCl sensitivity of blood pressure is independently associated with age and the inadequate suppression of the renin-angiotensin system. Because the contribution of the change in PRA to NaCl sensitivity was greater in women than in men, the mechanism of blood pressure elevation after NaCl loading may differ between genders.     

Rapid Testing for Noise Immunity of Electron Devices

Current switching in power control devices sometimes has serious noise difficulties. This paper presents a method of testing and measuring noise immunity. The noise immunity of a thyristor with magnetic core or unijunction transistor is analyzed and measured. The experiment agrees well with the theory.