Development of a new ion-imprinted polymer (IIP) with Cd2+ ions based on divinylbenzene copolymers containing amidoxime groups

Polymer Bulletin - In this study, we synthesized a new ion-imprinted polymer (IIP) based on introduction of amidoxime groups in acrylonitrile, complexation with Cd2+ ions and polymerization with...     

The influence of oxygen partial pressure on growth of the (Hg,Re)-1223 intergrain junction

Hg/sub 0.82/Re/sub 0.18/Ba/sub 2/Ca/sub 2/Cu/sub 3/O/sub 8+/spl delta// polycrystalline samples were successfully obtained by using different oxygen partial pressure in the annealing treatment of the precursor ceramic. The doping state was confirmed by X-ray powder diffraction pattern analysis and by observing distinct thermopower values at room temperature. Also, the intergrain regions have shown an improvement in the critical current density when using the precursor preparation with 10% O/sub 2/ and 90% Ar (optimal doped). The optimal doped sample has presented the highest /spl alpha/ exponent of the J/sub c//spl prop/[1-(T/T/sub c/)/sup 2/]/sup /spl alpha// dependence. For the case of (Hg,Re)-1223 polycrystalline superconductor applications, the /spl alpha/ exponent can be used as a junction quality parameter.     

Miniaturized coplanar waveguide stop band filters based on multiple tuned split ring resonators

A novel compact stop band filter consisting of a 50 /spl Omega/ coplanar waveguide (CPW) with split ring resonators (SRRs) etched in the back side of the substrate is presented. By aligning SRRs with the slots, a high inductive coupling between line and rings is achieved, with the result of a sharp and narrow rejection band in the vicinity of the resonant frequency of the rings. In order to widen the stop band of the filter, several ring pairs tuned at equally spaced frequencies within the desired gap are cascaded. The frequency response measured in the fabricated prototype device exhibits pronounced slopes at either side of the stop band and near 0 dBs insertion loss outside that band. Since SRR dimensions are much smaller than signal wavelength, the proposed filters are extremely compact and can be used to reject frequency parasitics in CPW structures by simply patterning properly tuned SRRs in the back side metal. Additional advantages are easy fabrication and compatibility with MMIC or PCB technology.     

Development of New Sulphonyl Resin from Modification of Commercial Resin

Summary This article deals with the handy synthesis of sulfonyl resins, which were produced by the treatment of a commercial sulfonic resin (Lewatit VPOC1812^® based at divinylbenzene (DVB) and styrene (STY). The preliminary chemical modification was based on the reaction of the Lewatit VPOC1812^® with thionyl chloride aiming to produce the sulfonyl chloride groups. The best conditions to obtain the sulfonyl chloride groups were: SOCl₂/SO₃H (molar ratio) =13 at 79 °C during 72 h. The resin chlorinated was afterward treated with urea, thiourea or guanidine. The functionalized resins with urea, thiourea or guanidine were produced with 56, 68 and 93% yield, respectively. The commercial and modified resins were characterized by apparent density, swelling degree, elemental analysis (CHNS), FTIR, optical microscopy (OM) and scanning electron microscopy (SEM).     

Final Drying of Whole Milk Powder in Vibrated-Fluidized Beds

Vibro-fluidized beds are widely used in drying sticky powders and agglomerated materials as milk powder. Using a vibro-fluidized laboratory scale dryer, this work is aiming at analyzing preliminarily the effect of its operational variables on the drying kinetics and characteristics of whole milk powder. The full-factorial design technique with three replications at the central point has been employed to generate data and correlations to quantify the effect of inlet air temperature, air flow rate, and vibration bed amplitude on the drying curves and the milk powder properties related to its faster reconstitution in water (as tapped density, Hausner cohesion ratio, agglomerate size distribution, and internal pore concentration). Results obtained are analyzed and discussed to identify the adequate operation condition for final drying whole milk powder in vibro-fluidized beds, assuring a high product quality.     

Generating compact, guaranteed passive reduced-order models of 3-D RLC interconnects

As very large scale integration (VLSI) circuit speeds and density continue to increase, the need to accurately model the effects of three-dimensional (3-D) interconnects has become essential for reliable chip and system design and verification. Since such models are commonly used inside standard circuit simulators for time or frequency domain computations, it is imperative that they be kept compact without compromising accuracy, and also retain relevant physical properties of the original system, such as passivity. In this paper, we describe an approach to generate accurate, compact, and guaranteed passive models of RLC interconnects and packaging structures. The procedure is based on a partial element equivalent circuit (PEEC)-like approach to modeling the impedance of interconnect structures accounting for both the charge accumulation on the surface of conductors and the current traveling in their interior. The resulting formulation, based on nodal or mixed nodal and mesh analysis, enables the application of existing model order reduction techniques. Compactness and passivity of the model are then ensured with a two-step reduction procedure where Krylov-subspace moment-matching methods are followed by a recently proposed, nearly optimal, passive truncated balanced realization-like algorithm. The proposed approach was used for extracting passive models for several industrial examples, whose accuracy was validated both in the frequency domain as well as against measured time-domain data.     

Analysis of the propagation of leaky magnetostatic modes in normally magnetized microstrip and slot lines

The propagation of leaky forward magnetostatic (MS) volume waves along ferrite-loaded microstrip and slot lines is analyzed. This phenomenon is studied by means of a numerical approach based on the residue calculus technique because of its good numerical convergence and stability. The proposed method allows for a quick and accurate computation of the phase and attenuation constants of the leaky MS modes. A comparative analysis between both microstrip lines and slot lines is carried out, and some new physical effects, such as MS resonances in the radiation loss, are reported. The advantages of the proposed method of analysis over other numerical methods, such as Galerkin's or moment methods, are also discussed.     

停止强制驱逐——来自巴西库里蒂巴的报告

2003年10月1日清晨，城市警卫队的队员在巴西的库里蒂巴对一处叫Sambaqui的贫民窟住区进行了封锁，把居住在那里的72个人从他们的家中驱赶了出去。警卫队摧毁了这些人的房屋，点燃大火，把屋子里的床垫、器具和其它的日用品，甚至还包括一名老妇人喂养的小猫都丢进了大火中。武装的警卫队员还在一次未经官方批准的行动中对六个人实施了殴打。那些从自己的家园被驱赶出来的人不得不暂时住在为他们提供的一处市中心的工会大楼中。     

Four-wire current-regulated PWM voltage converter

Shunt active power filters are connected in parallel with the electricity supply network. If the AC mains has a neutral conductor, it is desirable to compensate the mains harmonic currents zero-sequence components. This can be achieved with a four-wire pulsewidth modulation voltage converter connected to the AC mains. In this case, the three-phase and the neutral AC currents must be controlled. A generalization of the space-vector-based current controller in the αβo coordinate system is presented in this paper. With this current controller, all the current harmonic systems of positive, negative, and zero sequence can be injected by the converter and, thus, compensated on the AC mains. The system is also useful to compensate unbalanced currents of fundamental frequency. A useful benefit of this system is that it is possible to control the converter four-wire currents with equal hysteresis errors. Simulation and experimental results are presented